Up (urea phosphate)
Properties:
White crystal, easily soluble in water, but not in organic solution; melting point at 117.3 ípc , its water solution is strongly acidic, ph value of 1% solution is 1.89, it has got bad heat stability and easily decomposed when heated.
Up (urea phosphate)
Food grade
Guaranteed technical specifications:
No specifications
1 main contents(as h3po4 .Co(nh2 )2 )min% 98.00
2 phosphorus pentoxide (as p2o 5 )min% 44.00
3 nitrogen(as n) min% 17.00
4 ph 1.6-2.4
5 moisture max% 0.20
6 heavy metals(as pb) max% 0.001
7 arsenic(as as) max% 0.0003
8 fluoride(as f) max% 0.003
9 water insoluble max% 0.10
Up (urea phosphate)
Packing and storage:
In 25kg, 50kg, 1000kg net bags, store at a cool, dry and well ventilated place.
Tsp (tri-sodium phosphate)
Properties:
White or colorless crystals, efflorescent in air, easily soluble in water but not in organic solution. Its water solution is alkaline. Ph value of 1% solution is 12.1, relative density at 1.62g/cm3, melting point is 73.4 íµ.
Guaranteed technical specifications
Food grade
No. Specifications
1appearance white powder
2 main contents max% 98.0
3 phosphorus pentoxide (p2o5) max%39.5
4 sodium oxides, as na2o 36-40
5 sulfate, as so4 max % 0.25
6 heavy metal, as pb max% 0.001
7 arsenic, as as max% 0.0003
8 fluoride as f max % 0.005
9 water insoluble max % 0.10
We can also produce industrial grade of tsp (tri-sodium phosphate).
Meanwhile, we provide the following products:
Mkp (mono potassium phosphate), dkp (di-potassium phosphate),
Ktpp (potassium tripolyphosphate), tkpp (tetra potassium pyrophosphate),
Msp (mono sodium phosphate), dsp (di-sodium phosphate),
Tsp (tri-sodium phosphate), shmp (sodium hexametaphosphate),
Tspp (tetra sodium pyrophosphate), stpp (sodium tripolyphosphate),
Sapp (sodium acid pyrophosphate), map (mono ammonium phosphate),
Dap (di-ammonium phosphate), up (urea phosphate).
Every product can be produced according to our clientí»s requirements.
Anda liyuan sincerely hopes to cooperate with friends from home and abroad!
Tsp (tri-sodium phosphate)
Packing and storage:
In 25kg, 50kg, 1000kg net bags, store at a cool, dry and well ventilated place.
Shmp (sodium hexametaphosphate)
Properties:
White powder; density 2.484(20íµ); soluble in water but insoluble in organic solvent; it has got strong hygroscopicity and can absorb humidity from the air to become into pasty form; it may form soluble cheats with ions of ca, ba, mg, cu, fe etc. And is a good water treatment chemical.
Guaranteed technical specifications:
Food grade
No.Specifications
1 appearance white powder
2 total phosphates (as p2o5 )% min 68
3 inactive phosphates (as p2o5 )% max 7.5
4 iron (fe) % max 0.05
5 ph value 5.8-6.5
6 solubility pass
7 heavy metals (as pb) % max 0.001
8 arsenic (as)% max0.0003
9 fluoride (as f) %max 0.003
10 water insoluble matter % max 0.05
11 polymerization 9-21
We can also produce industrial grade of shmp (sodium hexametaphosphate).
Meanwhile, we provide the following products:
Mkp (mono potassium phosphate), dkp (di-potassium phosphate),
Ktpp (potassium tripolyphosphate), tkpp (tetra potassium pyrophosphate),
Msp (mono sodium phosphate), dsp (di-sodium phosphate),
Tsp (tri-sodium phosphate), shmp (sodium hexametaphosphate),
Tspp (tetra sodium pyrophosphate), stpp (sodium tripolyphosphate),
Sapp (sodium acid pyrophosphate), map (mono ammonium phosphate),
Dap (di-ammonium phosphate), up (urea phosphate).
Every product can be produced according to our clientí»s requirements.
Anda liyuan sincerely hopes to cooperate with friends from home and abroad!
Shmp (sodium hexametaphosphate)
Packing and storage:
In 25kg, 50kg, 1000kg net bags, store at a cool, dry and well ventilated place.
Tspp (tetra sodium pyrophosphate)
Chemical formula: na3po4. Nh2o (n=0, 12)
Molecular weight: 380.14
Standard executedú¦hg/t2517-93
Product name : tetra sodium pyrophosphate
Model : food grade
Molecular formula: na4p2o7
Molecular weight:265.90
2.Appearance and properties:
White powder, easy soluble in water, no soluble in ethanol.
The water solution is alkaline.
3.Usage:
Used as improving agent in food industy, ph regulating agent, metal ion complex agent, emulsion, dispersing agent and adhesivegent. Applied in the processing of meat and aquatic products in order to hold water, keep the meat fresh and tender, stabilize the natural color and prevent fat from putridity. Also used in the production of yeast powder and cheese etc.
4.Specificationgs
Na4p2o7 96.5%min
Substances not dissolved in water 0.20%max
Ph value(1% of aqueous solution) 9.9-10.7
Ortho-phosphates ---
Arsenic(as) 0.0003%max
Heavy metal(pb) 0.001%max
Fluorides(f) 0.005%max
Tspp (tetra sodium pyrophosphate)
Packing: in 25 kgs woven or kraft paper bags with a pe bag inner.
Stpp (sodium tripolyphosphate)
Properties:
White powder; melting point 622ípc; easily soluble in water; it has got salient chelating capacity to ions of ca and mg etc. And can soften hard water to make suspension solution become into clear solution; it has got weak alkalinity but no corrosiveness. It is a surfactant, and has got outstanding emulsification to lubricants and fat. It has different bulk density, i.E. Low density 0.35-0.5g/cm3, medium density 0.51-0.65g/cm3 and high density 0.66-0.9g/cm3. This product has two crystalline forms, namely type i (high temperature type) and type ii (low temperature type). The chemical properties of the two types are the same, and the difference between them lies in the thermostability, hygroscopicity, and solubility and hydration heat when dissolving.
Food grade
Guaranteed technical specifications:
No.Specifications
1assayna5p3o10 % min 95.0
2p2o5 % min 57.0
3water insoluble matter % max0.05
4iron(fe) %max 0.01
5ph value(1%water solution) 9.5-10.0
6heavy metal (as pb) % max 0.001
7arsenic (as) %max 0.0003
8fluoride (f) % max 0.003
9whiteness %min 90.0
Stpp (sodium tripolyphosphate)
In 25kg, 50kg, 1000kg net bags, store at a cool, dry and well ventilated place.
Sapp (sodium acid pyrophosphate)
Properties:
White powder or granular; relative density 1.86g/cm3;soluble in water and insoluble in ethanol; if its aqueous solution is heated together with diluted inorganic acid, it will be hydrolyzed into phosphoric acid; it is hydroscopic, and when absorbing humidity it will become into a product with hexa-hydrates; if it is heated at a temperature above 220íµ, it will be decomposed into sodium meta phosphate.
Food grade
Guaranteed technical specifications:
No Specifications
1 appearance white powder
2 main contents (as na2h2p2o7)% min 95.0
3 p2o5% 63.0-64.0
4 ph value 3.5-4.5
5 water insoluble %max 1.0
6 fluoride (as f) % max 0.005
7 heavy metals (as pb) % max 0.0015
8 arsenic (as) % max 0.0003
9 loss on ignition(105íµ) %max 0.5
We can also produce industrial grade of sapp (sodium acid pyrophosphate).
Meanwhile, we provide the following products:
Mkp (mono potassium phosphate), dkp (di-potassium phosphate),
Ktpp (potassium tripolyphosphate), tkpp (tetra potassium pyrophosphate),
Msp (mono sodium phosphate), dsp (di-sodium phosphate),
Tsp (tri-sodium phosphate), shmp (sodium hexametaphosphate),
Tspp (tetra sodium pyrophosphate), stpp (sodium tripolyphosphate),
Sapp (sodium acid pyrophosphate), map (mono ammonium phosphate),
Dap (di-ammonium phosphate), up (urea phosphate).
Every product can be produced according to our clientí»s requirements.
Anda liyuan sincerely hopes to cooperate with friends from home and abroad
Sapp (sodium acid pyrophosphate)
In 25kg, 50kg, 1000kg net bags, store at a cool, dry and well ventilated place.
MAP (Mono Ammonium Phosphate)
Properties:
White granular crystal; relative density at 1.803, melting point at 190 , easily soluble in water, slightly soluble in alcohol, insoluble in ketone, PH value of 1% solution is 4.5.
Guaranteed Technical Specifications:
Food Grade
No Specifications Food Grade
1 Main contents% min 98.0
2 Phosphorus pentoxide% min 61.0
3 Nitrogen, as N % min 11.8
4 PH of 1% water solution 4.4-4.8
5 Moisture% max 0.2
6 Heavy metals, as Pb %max 0.001
7Arsenic, as As %max 0.0003
8 Fluoride as F % max 0.002
9 Water insoluble % max 0.10
We can also produce Industrial Grade of MAP (Mono Ammonium Phosphate).
Meanwhile, we provide the following products:
MKP (Mono Potassium Phosphate), DKP (Di-potassium Phosphate),
KTPP (Potassium Tripolyphosphate), TKPP (Tetra Potassium Pyrophosphate),
MSP (Mono Sodium Phosphate), DSP (Di-Sodium Phosphate),
TSP (Tri-Sodium Phosphate), SHMP (Sodium Hexametaphosphate),
TSPP (Tetra Sodium Pyrophosphate), STPP (Sodium Tripolyphosphate),
SAPP (Sodium acid pyrophosphate), MAP (Mono Ammonium Phosphate),
DAP (Di-Ammonium Phosphate), UP (Urea Phosphate).
Every product can be produced according to our clientí»s requirements.
ANDA LIYUAN sincerely hopes to cooperate with friends from home and abroad!
MAP (Mono Ammonium Phosphate)
In 25kg, 50kg, 1000kg net bag, store at a cool, dry and well ventilated place.
Dap (di-ammonium phosphate)
Properties: White granular crystal, relative density at 1.619g/cm3, melting point at 155 , easily soluble in water, insoluble in alcohol, ph value of 1% solution is 8.0.
Guaranteed technical specifications: food grade | no. Specifications
1. Main content% min 98.0
2. Phosphorus pentoxide% min 53.0
3. Nitrogen, as n % min 20.8
4. Ph value of 1% solution 7.8-8.2
5. Moisture % max 0.2
6. Heavy metals, as pb % max 0.001
7. Arsenic, as as% max 0.0003
8. Fluoride as f% max 0.005
9. Water insoluble % max 0.10
We can also produce industrial grade of dap (di-ammonium phosphate).
Meanwhile, we provide the following products:
Mkp (mono potassium phosphate), dkp (di-potassium phosphate),
Ktpp (potassium tripolyphosphate), tkpp (tetra potassium pyrophosphate),
Msp (mono sodium phosphate), dsp (di-sodium phosphate),
Tsp (tri-sodium phosphate), shmp (sodium hexametaphosphate),
Tspp (tetra sodium pyrophosphate), stpp (sodium tripolyphosphate),
Sapp (sodium acid pyrophosphate), map (mono ammonium phosphate),
Dap (di-ammonium phosphate), up (urea phosphate).
Every product can be produced according to our clientf+s requirements.
Anda liyuan sincerely hopes to cooperate with friends from home and abroad!
Dap (di-ammonium phosphate)
In 25kg, 50kg, 1000kg net bags, store at a cool, dry and well ventilated place.
Dsp (di-sodium phosphate)
Properties:
White or colorless crystalline free flowing solid, efflorescent in air, easily soluble in water, but insoluble in alcohol, its water solution is slightly alkaline, relative density at 1.52 g/cm3, melting point at 35íµ.
Food grade
Guaranteed technical specifications:
No. Specifications
1 main contents min % 98.0
2 phosphorus pentoxide, as p2o5 min% 49.0
3 ph of 1% water solution 8.5-10.0
4 heavy metals, as pb max % 0.001
5 arsenic, as as max % 0.0003
6 fluoride, as f max % 0.005
7 water insoluble max % 0.10
We can also produce industrial grade of dsp (di-sodium phosphate).
Meanwhile, we provide the following products:
Mkp (mono potassium phosphate), dkp (di-potassium phosphate),
Ktpp (potassium tripolyphosphate), tkpp (tetra potassium pyrophosphate),
Msp (mono sodium phosphate), dsp (di-sodium phosphate),
Tsp (tri-sodium phosphate), shmp (sodium hexametaphosphate),
Tspp (tetra sodium pyrophosphate), stpp (sodium tripolyphosphate),
Sapp (sodium acid pyrophosphate), map (mono ammonium phosphate),
Dap (di-ammonium phosphate), up (urea phosphate).
Every product can be produced according to our clientí»s requirements.
Anda liyuan sincerely hopes to cooperate with friends from home and abroad!
Dsp (di-sodium phosphate)
Packing and storage: in 25kg, 50kg, 1000kg net bags, store at a cool , dry and well ventilated place.