Features Universal AC input / Full range
AC input active surge current limiting
Built-in active PFC function, PF>0.95
Protections:Short circuit/Over load/Over voltage/Over temperature
Built-in constant current limiting circuit
Current sharing up to 2 units or 2000W
Built-in remote ON-OFF control
Built-in remote sense function
SpecificationOver Load Protection 115~140% of rate load. Protection type : Constant current limiting, recovers automatically after fau
Over voltage protection type : Shunt down o/p voltage, re-power on to recover.
Over temperature TSW1: 95?C (Detect on the heatsink of PFC MOSFET) TSW2: 90?C (Detect the winding of output choke)
Protection type : Shun down o/p voltage, recovers automatically after temperature goes down
Remote control RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current <20mA
Working temp., humidity -10~+65?C (Refer to output load derating curve), 20~90% RH non-condensing
Storage temp., humidity 20~+85?C , 10~95% RH
Temp. Coefficient ?0.03%/?c (0~50?c)
Vibration 10~500hz, 2g 10min./1cycle, 60min. Each along x, y, z axes
Safety standards ul1950, tuv en60950 approved
Emi conduction & radiation compliance to en55022 (cispr22) class b
Harmonic current compliance to en61000-3-2, -3, class a
Ems immunity compliance to en61000-4-2, 3, 4, 5, 6, 8, 11; env50204, light industry level, criteria a
Withstand voltage i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac
Isolation resistance i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc
MTBF 59.6K hrs min. MIL-HDBK-217F (25 ?C)
Input Voltage 90 ~ 264VAC 127 ~ 370VDC
Input Frequency 47 ~ 63Hz
Power Factor 0.95/230VAC 0.95/115VAC at full load
AC Current 11.2A/115AVC 5.6A/230VAC
Inrush Current 32A/115VAC 63A/230VAC
Leakage Current <2mA / 240VAC
Setup, Rise Time 1500mS, 50mS/230VAC 1500mS, 50mS/115VAC at full load
Hold Time 24mS/230VAC 24mS/115VAC at full load
ItemsPSP-1000 Series Output Data
Part No Voltage Rated Current Rated Power Peak Load R&N Volt Adj. Tol. Line Reg. Load Reg. Eff. OVP
PSP-1000-5 5V 145A 725W 800W 100mV 4.75 ~ 5.5V í+6% í+0.5% í+2.0% 77% 5.75 ~ 6.75V
PSP-1000-12 12V 75A 900W 1000W 150mV 10 ~ 13.2V í+3% í+0.3% í+0.5% 84% 13.8 ~ 16.2V
PSP-1000-13.5 13.5V 67A 904.5W 1000W 150mV 12 ~ 15V í+2% í+0.3% í+0.5% 84% 15.5 ~ 18.2V
PSP-1000-15 15V 60A 900W 1000W 150mV 13.5 ~ 18V í+2% í+0.3% í+0.5% 84% 18 ~ 21V
PSP-1000-24 24V 37.6A 902.4W 1000W 150mV 20 ~ 26V í+1% í+0.2% í+0.5% 86% 27.6 ~ 32.4V
PSP-1000-27 27V 33.6A 907.2W 1000W 150mV 24 ~ 30V í+1% í+0.2% í+0.5% 86% 31 ~ 36.5V
PSP-1000-48 48V 19A 912W 1000W 200mV 41 ~ 56V í+1% í+0.2% í+0.5% 86% 57.6 ~ 67.2V.
Li Polymer Battery Advantages:
1. Excellent Safety Performance: As the aluminum bluster outer package is different, in the metal-shelled liquid lithium power cell, no safety problems arise, as it ca n't detonate, only expand.
2. super thin design: suitable to all kinds of super thin electrical appliance, but liquid lithium ion will have technical bottleneck as thickness is less than 3.6mm;
3. Light Weight: The polymer lithium cell is 40% lighter than the same specification of the steel shell liquid lithium cell, and 20% lighter than aluminium shell liquid lithium cell.
4. High Capability: The polymer capacity is 10-15% more than the same specification steel shell and aluminium shell liquid lithium cell.
5. Low Internal Resistance: At present the impedance of our products can be made below 35m, better using battery capacity. Because of the difference of impedance, the usage time can differ by 20-50% with the same
6. Customized Shape: The thickness and shape can be made according to the requirements of customers. Some special shapes as arc-shape battery can also be made.
7. Excellent Discharge Performance: LIP applies gelled electrolyte with more stable discharge characteristics and higher discharge plateau.