The equipment takes agricultural and forest waste, such as rice husk, wood chips, coconut fiber dust, saw dust and crop stalks etc as the raw biomass fuel. These biomass fuels will be gasified into rough gas in the Gasifying Furnace, which is our patented product. Then after a series of cleaning and cooling treatment, the purification of the gas will be pure enough to meet the requirement of gas needed by the internal combustion engine to generate electric power.
Available biomass fuels:
Agriculture and forest residues, such as rice husk, crop stalks coconut fiber dust, palm shell, pruned fruit tree branch, wood chips, chips from timber processing factory and so on.
Biomass gas from Fengyus fluidized bed can not only be sent to internal combustion engine for electric power generation but can also be used for household fuel to cooking and heating. It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying
Index:
Model:LHC-100 LHC-300
Generator rated output power:100-300KW
Production volume of biomass gas 2250Nm/3hr
Gas temperature of the outlet after cleaning and cooling:under 45 degree celsius
Consumption of biomass fuel:0.9-1.8ton/hr(for rice husk)
Weight:2.0-3.8ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel gasification method, the caoricity of biomass of gasification is normally 1100-1500kcal/Nm3.(4.6-6.3MJ/Nm3)
Biomass gas component:
CO:17.2%
H2:4.05%
CH4:6.82%
CmHn:1.24%
H2S:----
CO2:15.1%
O2:0.8%
N2:54.7%.
Over time in long-term running of industrial equipment, it's inevitable that water, and solid granules enter the lubricating system. This will lead to the erosion and wear of metal components and reduce the performance of lubricating oil to affect the efficient running performance of the unit group. The TY series oil purification device is specially designed and produced for solving these problems.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
