This series of machine is used to cut the paper roll into paper sheets. It adopts advanced technology of British and it is driven by AC servo motors, the high cutting speed reaches 300 cuts /min. And it can cut 8 paper rolls at one time. It is also equipped with automatic deflection rectify and antistatic device. The paper feeding and delivering units are automatic with the hydraulic system. The human and machine interface system could make operation become much easy and more convenient.
Model: CHM-1400/1700/1900
Main specifications:
weight of paper: 60-550gsm
Cutting accuracy: 0. 5mm tolerance allowed
Max. Cutting speed: 300sheets/min, operation speed depends on cut length, paper quality, paper grade&grammage.
Max. Cutting meter speed: 300m/min
Cutting length range: 450-1450mm
Max. Diameter of reel: 1800mm
Sheet stack height: 1300mm
Max. Width of cutting paper: 1400mm/1700mm/1900mm
Main work sections:
Cutting section:
1. Computer operation interface, easy to operate.
2. High precision special alloy steel knife
3. Cutting accuracy is 0. 5mm tolerance
Paper feeding section:
1. Double limbs oil pressure shaftless paper rack
2. Auto tension control system
3. Auto paper edge guiding system
Electric control section:
1. PLC control system
2. AC servo driving motor
3. High precision encoder&cutting
4. Long endurance
Slitting knife:
1. Three sets of slitting knives
2. Used for trimming and middle slitting
Paper conveyer system
1. The number of overlapping sheets can be adjusted by this section.
2. The single sheet outlet can be adjusted.
CHM-1400:12000kg
CHM-1700: 13000kg
CHM-11900: 14000kg.
This series of machine is used to cut the paper roll into A4 size paper and wrapping it.
Model: CHM-A4-4
Main specifications:
Paper Width: Gross width 900mm, net width 840mm
Cutting numbers: 4 cutting-A4 210mm (width)
Diameter of: Paper roll: Max. 1200mm. Min. 600mm
Diameter of: Paper core: 3 or 6 inches or depend on the demand of clients
Paper weight: 60-100gsm
Sheet length: 297mm
Ream amount: 500 sheets. Height: Max.62mm
Max. Speed of production: 120m/min(depend on different paper)
Max. Numbers of cutting: 404cutting/min
Output of the ream: 3.2 times/min
Load of cutting: 400gsm
Cutting accuracy: about 0. 2mm
Cutting requirement: constant speed, no break in reel, cutting all paper one time , eligible paper.
Drive: AC frequency conversion and step-less
Main power supply: 3*380V AC, 50HZ
Voltage: 220V AC/ 24V DC
Power: 32KW
Compressing air consumption: 300NL/min
Air pressure: 6 bar
Edge cutting: 2*10mm
Optional parts:
Auto wrapping system
CHM-A4-4: 17000kg.
This machine adopts the technology of europe and it has 10. 4" or 15" display screen designed novelly, the color of screen can be matched. Programming 10, 000 groups to assure the stability of performance.
The paper delivering section is driven by AC servo motor so that, the noise can be reduced and the working speed can be increased highly.
The paper feeding accuracy of paper location can reach 0. 001mm around.
Hydraulic pressure section adopts the rapid pressure increasing system to finish the pressure regulation.
The electric control system adopts Panosonic PLC, relilable characteristic, large capacity, it can store data for about 300, 000 hours and can upgrade to perform remote monitoring.
The low pressure control section adopts OMRON, LG, TOSHIBA, SCHNEIDER, BDI to make the control stably and efficient.
Model: CHM-92CD/115CD/137CD
Main specification:
Cutting width: 92cm/115cm/137cm
Paper feeding depth: 92cm/115cm/137cm
Master power: 3kw/4kw/4. 5kw
Min. Paper-weight pressure: 150dan
Max. Paper-weight pressure: 4000dan/4500dan/5500dan
Cutting accurancy: 0. 2mm tolerance.
Min. Cutting datumn 2. 5cm/2. 5cm/3. 0cm
Cutting speed: 45cuts/min
Voltage: 360-400V.
Packing dimension:
92CD: 225*140*191cm
115CD: 275*140*200cm
137CD: 295*140*200cm.
