Hgm ultrafine mill is ideal equipment for grind non-explosive, non-flammable and brittle materials which moh's hardness not more than six grade, like calcite, chalk, limestone, dolomite, kaolin, gypsum etc. Product fineness can be controlled between 400-3000. This mill can be used widely in metallurgy, chemical combination, construction, mining, cement and other fields.
Hgm ultrafine mill is ideal equipment for grind non-explosive, non-flammable and brittle materials which moh's hardness not more than six grade, like calcite, chalk, limestone, dolomite, kaolin, gypsum etc. Product fineness can be controlled between 400-3000. This mill can be used widely in metallurgy, chemical combination, construction, mining, cement and other fields.
Performance features
A. High efficiency and low consumption. At the status of the same material, power, and the same finish fineness, its production capacity per hour is 40% higher than other jet mill and mixing grinder.
B. Durable. At the status of the same material, power, and the same finish fineness, hgm ultrafine mill wear life is longer than impact mill and turbine mill.
C. Advanced grind device. Since there is no rolling bearings and bolts designed in the grinding space, it can avoid machinery breakdown problem due to long and hard use for bearing and airproof parts and sudden falling for rolling bears and bolts.
D. Excellent frequency and speed conversion device. It can easy to adjust granularity evenly.
E. Wide fineness adjustable function. Finish fineness is adjustable between 400 to 3000 mesh.
Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum, bricks, tiles, limestone, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also applied instead of cone crusher.
Performance and features:
Hammer crusher has the advantages of high product capacity, high crushing ratio, low power consumption, uniform products partial size, simple structure, compact and light, low investment cost, easy to management, etc. The defects are: when crushing very hard materials, it will cause greater wear of hammer and grate and consume more metal; it needs more maintenance time and uniform feeding of materials; when crushing soft-moist materials, the capacity will become significantly lower and even stop because of material jam. In order to avoid jam, the moisture content of materials should be less than 10%-15%.
Model PC400x300
Rotor diameter (mm) 400
Rotor length (mm) 300
Rotor speed (r/min)1100
Max. feeding size (mm) <100
Output size (mm) 5-10
Capacity (t/h) 5-13
Motor power (kw)11
Number of hammer (piece) 16
Weight (t) 0.8
Overall dimension (mm) 900*670*860 .
Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100mpa. Such as coal, salt, chalk, gypsum, bricks & tiles, limestone, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also is applied instead of cone crusher.
Jaw Crusher is mainly used to crush kinds of mining stones primarily and the largest compression resistance of the material to be crushed is 320Mpa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway and chemical industry.
Working Principle:
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.
Characteristics:
High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost.
Type Inlet size (mm) Max Feeding Size
(mm) Discharge Size(mm) Power
(KW) Capacity
(T/H)
PE150x250 150x250 125 10-40 5.5-7.5 1-5
PE200x350 200x350 125 15-40 7.5-11 5-16
PE250x400 250x400 210 20-60 15-18.5 5-20.
