1. Setting storage bucker and input hopper separately and inputting material with rations.
2. Compulsive input device
Qtj4-18 adopts compulsive input system (there are several rows of mixing forks in the cloth box), when the cloth box is conveyed up to the mould box, mixing fork will move to input material compulsively, which guarantees the speed of inputting and also makes the inputting equably.
3. Excellent vibration system:
The main vibration system of the is composed of vibration machine and vibration box, its frequency and amplitude are adjustable4.
Intelligent control we set the parameter for best shaping and most conservative, when the data is higher than the upper limit, the machine can decrease material, when lower than the floor level, it can increase material.
5. Effective worktable
The efficiency vibration of the shaping area can reach to 0.5m2 (850 x 550 mm)
6. Multi-function
It replaces the mould can produce different size of bricks and blocks.
1. Setting storage bucker and input hopper separately and inputting material with rations.
2. Compulsive input device
Qtj4-18 adopts compulsive input system (there are several rows of mixing forks in the cloth box), when the cloth box is conveyed up to the mould box, mixing fork will move to input material compulsively, which guarantees the speed of inputting and also makes the inputting equably.
3. Excellent vibration system:
The main vibration system of the is composed of vibration machine and vibration box, its frequency and amplitude are adjustable4.
Intelligent control we set the parameter for best shaping and most conservative, when the data is higher than the upper limit, the machine can decrease material, when lower than the floor level, it can increase material.
5. Effective worktable
The efficiency vibration of the shaping area can reach to 0.5m2 (850 x 550 mm)
6. Multi-function
It replaces the mould can produce different size of bricks and blocks.
1. Product quantity of different
. Moulds: 390 x 190 x 190 x 6 pieces/mould (standard concrete brickú¬
. 240 x 115 x 90 x 15 pieces/mould (concrete brick with 8 holes)
. 240 x 115 x 53 x 30 pieces/mould (standard brick)
2. Carrier size: 850 x 680 x 40 (wood)
3. Shaping cycle: 12 ~ 18s (depends on the size and
Character of concrete brickú¬
4. Vibration parameter:
. Vibration frequency (adjustable) 80hz (max.)
. Vibration force (adjustable) 88hz (max.)
5. The total power: 36.8 kw
6. Overall size: 6370 x 2000 x 2510 mm
The series of block shaping machines, which meet the state
Standards of gbt8533-1998, are excellent in performance,
High in efficiency, and lower in energy consumption.
Characteristics:
Nine characteristics compared with clay brick:
1. Not using the clay as raw material to destroy any field.
2. Making use of three industrial wastes to change wastes
Into valuables.
3. Not using fire to bake blocks and not building kiln to
Save the energy sources and fields.
4. No chimney to protect the environment and avoid
Pollution.
5. Production process is simple, they can be made
Everywhere .
6. Low investment and achieving much faster results,
Customers can profit in half a year after investing.
7. The block can be produced all around the year.
8. Good looking, construction convenient, low-floor real
Jigsaw puzzle, and the high buildings do filler and cheap.
9. Technical criteria is better than those of red brick and
Green brick.
1. Transfer mechanism adopts mechanical drive, and use
Mechanical power reasonably and effectively, it can
Finish several technology actions without breaking.
Transfer mechanism wears well and is convenient for
Corrective maintenance.
2. When the machine is forming concrete brick, it librates
Up and down. There is vibration table with vertical
Orientation under the mould box, and vibrator vibrates
With compression over the crossbeam, thus when it
Produces concrete brick or pavement block, satisfactory
Shaping effect can be achieved, it fits for producing
Concrete brick or pavement block of high strength.
3. The machine is of multi-purpose, it can produce
Walling unit, pavement block and figure walling unit,
Etc.
4. The machine can use common plate as shaping baseboard.
5. The machine operates automatically, has high
Manufacturing efficiency, and needs low intensity of labor.
