Specifications:
1) Automatic washing, filling, capping founction in one unit
2) Three working stations available to wash bottles: Sterilized solutions(chlorine)
3) Washing: Fresh water washing: Product water rinse
4) Stainless steel waterproof housing
5) PLC controlled system for easy operation and maintenance
6) Adjustable filling capacity
7) Widely used for pure water filling lines
8) Bottle filling capacity: 200 bottles/hr
9) Cap specifications: 270 x 490 x 56mm
10) Compressed air capacity: P >= 0.6MPa
11) Bottle volume: 3/5G
12) Package size: Linear 3, 270 x 1, 200 x 1, 850mm
13) Linear style
Packing: Wooden case packing
ST6030+SM6040 Automatic sleeve sealing shrink packaging machine is commonly used for packaging beverages like bottled water, beer and soda, in bottles or cans. There are settings for packaging 6, 9, 12, 15, 18, 20, or 24 bottles or cans per pack. It features fully automatic feeding, film wraping, sealing, cutting and feeding into your shrink packaging tunnel.
Technical Features:
Film feeding is sensor controlled to minimize waste
Electronic PLC controls for consistant operation and easy changes and adjustments
Packs 2, 3 or 4 rows of containers, with or without trays
Special sealing cutter gives a perfect sealing line without sticking Feeding conveyor can be installed on either side
Specifications:
Machine Dimensions (mm): 1360 x 2120 x 1900
Maximum Package Size (mm): 500 x 300 x 330
Sealing Size (WxH mm): 700 x 330
Sealing Temperature: 0 to 200 degree
Packing Speed (pcs/min): 12 to 14
ANGELHZ-120 fully automatic stretch blow moulding machine produce bottle form 5 L to 25 L. Neck finish from 15 mm to 200 mm. It is suitable to produce thermo containers of PET, PC material. Feeding system carries the performs automatically. Precise design of heater ensures even heating for the performs. It is especially used to produce 5-gallon large volume containers.
Specification:
Container volume: 5-6L (2 cav) 10-1L (1 cav)
Theoretical output: 5 gallon: 120pcs/hr; 5L 700pcs/hr
Max. Length of bottle: 450mm
Bottle diameter: 350mm
Mould plate dimension: 520 x 600mm
Mould thickness: 400mm
Clamping force: 300kN
High press compressor: 1.2/30Mpa
Low press compressor: 1.6/10Mpa
Power: 20kW
Voltage/frequency: 220-380V / 50-60Hz
Machine dimension: 2.60 x 1.90 x 1.95m
Main body weight: 2.8T
Item: ANGEL RO-100B with automatic washing bottle function
First washing bottle and then filling water
Capacity: 400, 600, 800 and 1, 300 gallon per 24 hours
Source water: City water
Power: 220, 260, 300 and 510W
Rated current: 1, 1.2, 1.4 and 2A
RO membrane from USA has the 99% desalination:
UV: 16W
Ozone content: 1, 000mg
Recycle ration: 45 to 50
Filling flux: 8 liter/minute
Dimensions: 1, 950 x 720 x 1, 300mm
Use for 5 gallon bottle or smaller bottle It can be used in community, school and factory
Characteristics:
Luxury stainless steel waterproof frame, front door-open design, safe and sanitation, durable, easily install and maintain
Advanced RO technology, adopts nine steps to treat water to ensure the output water quality
Intelligent technology and IC card induction selling control technology to ensure the charge precision is up to dollar 0.01
Fully seal filling type + high-concentration ozone sterilization type to avoid second pollution
24 hours continues to kill germs by UV to ensure more best quality of the water
Lamp-checked technology available, users can check any impurities in the water directly
The light of the lighting marquee and filling compartment can be controlled by light to save power
Adopt sands filter (30kg) and active carbon filter (25kg)to be the first treatment, which can be backwashed to reduce the use cost
Features:
1) Made with reverse osmosis membranes (ESPA4040 x 10, 2 grade)
2) System components
a) Two stainless steel pre-filters
b) 800kg quartz sand filter
c) 300kg active carbon filter
d) PP sediment membrane: 330 x 500 x 1.5, 5 items
e) Pre-filter: 750 x 1500, 2 items
f) Two multi-phase pumps
g) Booster pump
h) Stainless steel waterproof housing
3) Capacity: 2,000L/h, 25 degrees
4) Dimensions: 3,200 x 700 x 1,970mm
5) Source water: tap water
Packing: Wooden case
