Properties:
PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc.
Specification:
items& index
Appearance Colorless or light yellow transparent liquid
Solid content %: 30 min
Free monomer (CH2=CH-COOH) %: 0.5 max
Density (20íµ)g/cm3: 1.15 min
pH(1% solution): 6.0~8.0
Notes: Solid content 40%, 45% and 50% are also available
Usage:
PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment.
25kg or 200kg in plastic barrel
Properties:HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330f¦. HPMA has obvious threshold effect under high temperature (350f¦) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300f¦ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement.
Specification:
items& index
Appearance Clear to umber transparent liquid
Solid content %: 48.0 min
Bromine value mg/g: 80.0 max
Average molecular weight: 450 min
pH(1% solution): 2.0-3.0
Density (20f¦)g/cm3: 1.18 min
Usage:
HPMA is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. HPMA has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion.
Normally In 250kg net Plastic Drum, IBC drum can also be used as required
Properties:MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300f¦). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields.
Specification:
items: Water treatment agent Accessory detergent
Appearance; Clear brown liquid amber transparent liquid
Solid content %: 48 min& 50 min
Free monomer (MA) %: 9.0 max& 5.0 max
Density (20f¦)g/cm3: 1.18 min& 1.18min
pH(1% solution): 2.0~3.0 &2.0f+1.0
Usage:
MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments.
Normally In 250kg net Plastic Drum, IBC drum can also be used as required
Properties:
AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index.
Specification:
items& index
Appearance: Colorless or light yellow viscous liquid
Solid content %: 40 min
Free monomer (as AA)%: 0.8 max
Density (20f¦)g/cm3: 1.15 min
pH(1% solution): 3.5-4.5
Viscosity mpa.s: 90-200
Usage:
AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5.
AA/AMPS can also be used as dyeing auxiliaries for textile.
Normally In 250kg net Plastic Drum, IBC drum can also be used as required
Properties:
T-225 is copolymer of polyacrylic acid and hydroxypropyl acrylate, it has good scale inhibition and dispersion properties to calcium phosphate and calcium carbonate, it has good dispersion properties to ferric oxide sludge, clay and grease. T-225can be used under high pH situation and has good compatibility with other organophosphines and BTA, T-225 can effectively withhold sediments of zinc salt and calcium phosphate, it has good scale inhibition and dispersion properties under high temperature and alkaline situations.
Specification:
items index
Neutro Acid
Appearance Colorless to light yellow viscous liquid
Solid content % 30.0 min 30.0 min
Free monomer (as AA )% 0.5 max 0.5 max
pH(1% solution) 7.5f+1.0 2.5f+0.5
Limiting viscosity number (30f¦) dl/g 0.060~0.095
Density (20f¦)g/cm3 1.10 min
40%, 50% PAA are also supplied.
Usage:
T-225 can be used in circulating cool water system in situation of alkaline and excess of phosphate. It can be used as scale inhibitor and dispersant for heater, none-column evaporator boiler, circulating cool water and oilfield dirty refilling water with high calcium content. The dosage of 10~30mg/L is preferred. It can be built with organophosphines to form full organic alkaline formula.
Normally In 200kg net Plastic Drum, IBC drum can also be used as required
