CGLHJ series of Electrical conveyor belt vulcanizer are specialized equipments for curing joints of belts of conveyer machines. The machine is made of light aluminum alloy materials, and with small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .Ití»s reliable and convenient to operate. At the same time, it has the merit of fast warming, uniform temperature, high thermal efficiency, etc. It is a kind of ideal adhesive joint equipment mechanical rubber conveyor belt.
The quality of the belt connection will influence the working efficiency and service life of belts directly, especially for the long distance and high-strength conveyer belts. Therefore, CGLHJ vulcanizer is the necessary assistant equipment of belt conveyer.
Purposesú¦
The device is widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc.
Technical parametersú¦
1. Vulcanization pressure: 1.0-2.0mpa;
2. vulcanization temperature: 145 íµ;
3. Difference in surface temperature of vulcanized plate: í+ 5 íµ;
4. Calefactive time (at normal temperature to 145 íµ) :¿Q30 min;
5. Power supply voltage: 380 v. 50Hz;
6. Output power of Electronic Control Box: 36 Kw;
7. Temperature adjustment range: 0 to 200 íµ;
8. Timing adjustment range: 0 to 99 min;
9. After the pressurization of 0.8 MPa, the gap between upper and lower heating plate is not more than 0.4 mm
CGLHJ Series of Electrical water cooling belt Curing Machine own small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .Its reliable and convenient to operate. Presently the devices are widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc.
The device can cool heating plates quickly through water as long as there is ordinary water supply at the scene after vulcanization. It Can greatly improve efficiency and enhance the quality of belt joints, generally cooling from the curing temperature to 60 íµ, 10 minutes, cooling water pressure í¦ 0.2 mpa.
Water cooling belt Curing Machine, of lightweight, can be moved by manpower easily. Please consider the facility of electricity and water before installation. Please put through the water sources with upper and lower heating plate, cooling water pipe by specialized water pipe, but not to discharge water for the time being. Then begin to maintain constant temperature until finish vulcanization, then open water supply at this time instill water into hot plates. When the temperature drops to preset technical value, discharging water and disassembling equipments are allowed, and the vulcanization is finished.
Purposesú¦
The device is widely used in the fields of metallurgy, chemical industry, metal mine, power plant, harbor and wharf where use the device to contact the belt joints. If users carry out vulcanization technics according to referred parameters, the pull intensity of the belt can be 90% comparing with the original one, not only the belt joints are smooth, but ití»s almost the same with the original belt, and meanwhile it will weaken the abrasion to rollers, furthermore it can prolong the service life of conveyor and conveyor belt.
No.1 Introduction:
Aiming at solving the defects of the traditional steeliness rollers, such as when encountered acid, alkali and salt, they are easy to get corrosive, sticky, abrade, and due to getting stuck of the axletree, the belt is easy to lacerate as well as their short service life, etc. Our company has succeeded in developing wear-resistant ceramic rollers. After the terminal operating results in iron and steel, chemical, fertilizer, mining, power plant, salt works and shipside industries show that the products are not only of wear and acid and alkali salt resistance , anti-oxidation, operation stability, security features, but also can effectively prevent the belt deviation, reduce partial loss of belt, prolong its service life, reduce the manpower, material resources and time caused by replacing rollers frequently, lower operating costs and improve the efficiency of belt conveyor. As operating under harsh environment in the open air, their service life is 3-5 times longer than the traditional one.
No.2 product advantages:
1. Corrosion resistance.
2. Strong hardness and abrasion resistance.
3. Entire hermetic sealing.
4. On the Ceramic surface forms a layer of oxide film, it doesní»t have any binding or response to any substance.
5. 2-5 times longer service life than steeliness roller, furthermore it can reduce belt abrasion and prolong service life of belts.
6. Cost-effective, it can reduce the integrated costs of the belt conveyor and repairing.
No.3 Data Sheet of Chemical Composition:
Component Sio2 Al2o3 Mgo Fe2o3 Cao Na2o Other
Content 51-54% 45-48% 0.4% 0.25% 0.15% 0.1% Tiny
No.4 Technical Parameters:
Compressive strength: 145 Mpa
Flexural strength: 80 ~ 120 Mpa
Hardness (Mohsí»s) :> 7
Adaptable Temperature: -80 to 180 íp C
Water absorption: <1%
Density: 2.8 g/cm3
Abrasion Rate: <1.0
Service life of Ceramic roll :> 10 years
Service Life of Axletree: <3 years (about three years to replace the Axletrees)
Allowed Axletree Temperature: <100 íp C
Applicable Belt-width: 500 to 1400 mm
Specifications No.: TD75, DT ó=
No.5: No.6 Data Sheet of Specifications:
(1) TD75 Generic Fixed-belt conveyor is designed according to national unification standards. It mainly uses to transport scattered materials, such as coal, ore, coke, sand, slag and grain, etc. meanwhile ití»s the ideal transportation equipment for industry, enterprise, harbor, wharf, power plant and storage, etc. The following picture shows the integrated structure.
Electrical conveyor belt vulcanizer
Cglhj series of electrical conveyor belt vulcanizer are specialized equipments for curing joints of belts of conveyer machines. The machine is made of light aluminum alloy materials, and with small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 mpa) of water supply system. It is equipped with light automatic electronic control box, which is connected with mainframe by integrative plug-in and multi-core cable .It»s reliable and convenient to operate. At the same time, it has the merit of fast warming, uniform temperature, high thermal efficiency, etc. It is a kind of ideal adhesive joint equipment mechanical rubber conveyor belt.
The quality of the belt connection will influence the working efficiency and service life of belts directly, especially for the long distance and high-strength conveyer belts. Therefore, cglhj vulcanizer is the necessary assistant equipment of belt conveyer.
Purposes
The device is widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc.
Technical parameters
1. Vulcanization pressure: 1.0-2.0mpa;
2. Vulcanization temperature: 145 ;
3. Difference in surface temperature of vulcanized plate: 5 ;
4. Calefactive time (at normal temperature to 145 ) :¿q30 min;
5. Power supply voltage: 380 v. 50hz;
6. Output power of electronic control box: 36 kw;
7. Temperature adjustment range: 0 to 200 ;
8. Timing adjustment range: 0 to 99 min;
9. After the pressurization of 0.8 mpa, the gap between upper and lower heating plate is not more than 0.4 mm
Wooden case or steel case
No.1 Introduction:
Galvanized Spiral Gas Drainage Tube is adopted international advanced production equipments by our company. Its galvanized with the inner and outside. It includes jointing spiral tube and without-jointing spiral tube. It has the following advantages: smooth inner wall, little resistance, light in weight, corrosion-proof, long service life, low cost, etc, it is the ideal equipment of Gas Drainage Tube in coal mines.
The jointing spiral tube is adopted cast steel flange connection, the automatic welding technics for the connection of tube body and flange.
Comparing with riveting technics, the technics avoids the second scathe to the tube body, and also with better capability of gasproof.
Due to the techniques of riveting with the misdistribution of joints, and the improper installation is easily leading to rips of tube. Aiming to the point, our company meets track with international technics and adopts integrated welding technics to avoid the existence problems of riveting.
No.2 Usage:
The product can be widely used in mine ventilation, gas drainage, and road and bridge construction, housing structure, discharging lampblack, draining contamination and basic equipment installation, etc.
No.3 Product Advantages:
ú¿1ú¬. Comparing with the traditional glass steel gas drainage tube and steel gas drainage tube, the mine-use galvanized spiral gas drainage tube has the following advantages:
1. Light of the pipeline in weight and easy to convey.
2. High-grade galvanized steel belts used and there is no use to consider of the burning blockage and electrostatic-proof problems.
3. Widely applicable diameter range from 80mm to 1600mm.
4. Spiral hinge mouth increases the loading power and pressure from the pipeline.
5. Inner wall of tube is smooth, little resistance and good circulation.
6. Galvanization prolongs service life.
7. Adopting cast steel flange connection, easily assembly and disassembly, with good interchangeability.
(2) Advantages of Galvanized Spiral Tube for Air-conditioner:
1. Good match with other products and high standardization.
2. Good capability of airproof.
3. Low wastage of aeration.
4. Convenient project checking.
5. Pressure resistance is better than ordinary tube and rectangle tube.
6. Saving material.
7. Low cost installation.
8. Elegance of integrated overall arrangement.
9. Convenient daily maintenance.