Brushless electronic speed controller
Brand: Maytech
1. Output: 50a(continuous), 60a(burst) up to 10 secs.
2. Input voltage: 2-4 cells lithium battery or 5-12 cells nicd/nimh battery.
3. Bec: mtc50a: 2a / 5v.
4. Motor supported: sensorless brushless motor
5. Suitable brushless motor: 9t and > 9t
6. Suitable car: 1/10, 1/12 on-road or off-road cars / trucks for normal race or race.
7. Size: 43mm (l) * 23mm (w) * 7mm (h).
8. Weight: 22g
9. Prog-device: pc via usb cable
10. Standard: CE/ROHS
MTDS8C:
Synthesized Dual conversion receiver
Size: 46x24x13mm·+1.8"x0.9"x0.5"·¼
Weight: 9.2g(with shirink wrap)
Range: >1.5km/4900ft
Sensitivity: better than 2.0»v
Selectivity: f+8 kHz at 65 dBdown
Number of Channel: 1-8
Filtering: Dual turned RF circuitry·+Dual 4 pole ceramic filter·+DSP filtering with mild algorithm
Modulate: FM/PPM
Intermediate Frequency: 10.7MHZ
IP3: +10dBm
Operating voltage: 4.8Vf+6.0VDC
Operating current: 17mA.
Weight: 43g.
9g digital servo specs: (can be perfectly used for 450/400 Class Helicopters)
*Size: 23.0 x 12.0x 21.5mm
*Operating Speed: 0.12sec/60degree
*Stall Torque: 1.5 kg/cm
*Operating Voltage: 4.80-6 Volts
Maytech 9gram servo is a superior performance servo, coming from the same factory as HD Power servos. It may be sold at a budget price but the performance and quality will easily match or exceed any other servo on the market!
Excellent quality servos, equivalent to SG90. Anyone that has used these is amazed by quality! ! Light and very quick servo ideal for weight sensitive applications. Includes several servo horns, grommets and mounting screws.
9g digital servo specs: (can be perfectly used for 450/400 Class Helicopters)
*Size: 23.0 x 12.0x 21.5mm
*Operating Speed: 0.12sec/60degree
*Stall Torque: 1.5 kg/cm
*Operating Voltage: 4.80-6 Volts
Maytech 9gram servo is a superior performance servo, coming from the same factory as HD Power servos. It may be sold at a budget price but the performance and quality will easily match or exceed any other servo on the market!
Excellent quality servos, equivalent to SG90. Anyone that has used these is amazed by quality! ! Light and very quick servo ideal for weight sensitive applications. Includes several servo horns, grommets and mounting screws.
Type: MTAS007
Size: 22.5X11.5X24.6mm (0.88"x0.45"x0.96")
Weight: 13.6g
Operating voltage: 4.8V~6.0V
Operating current: 200mA/60¿¼
Operateing speed: 0.12sec/60¿¼
Stall torque: 1.8kg.cm
Dead band: í-3uSec
Ball bearing: MR85
Gear Mterial: Metal
Connector wire length: 215mm
Weight: 43g
If you are a sport boater or top notch racer on a budget, the Maytech motor is the Brushless motor for you! Maytech high performance brushless motors have the rpm and motor efficiency similar to that of Brushless motors like Hacker that are 2 to 4 times higher in Price!
The Maytech motor is a far better motor. It runs cooler because its far more efficient and much better balanced. It also comes with a 6mm drive shaft that has a 5mm output shaft to fit all the popular 5mm couplers.
Motor Specs:
12-32 NiMh or 4s to 8s Lipo cells in a 30"- 40" mono or hydro.
1400 - 1800 Watts Maximum with proper cooling.
36mm Diameter x 60mm long
5mm Output Shaft for use with 5mm Couplers.
25mm Mounting Hole Spacing. Uses 3mm screws.
333 grams
2-Pole Neo Magnets & Compressed Windings.
Dimension: 36mm (dia) * 60mm (L)
120A ESC for radio-controlled car/crawler
Brand: Maytech or our OEM Brand;
Application: for 1/8, 1/10 1/12, Scale;
Specs:
1. Output: 120A(Continuous), 600A(Burst) up to 10 Secs.
2. Input Voltage: 2-3 cells lithium battery or 5-10 cells NiCd/NIMh battery.
3. BEC: 3A /6V SBEC.
4. Motor Supported: Sensorless Brushless Motor
5. Suitable Car: 1/8, 1/10, 1/12, 1/18 on-road or off-road cars / trucks for normal race or race.
6. Size: 43mm (L) * 30mm (W) * 39mm (H).
8. Weight: 112g
9. Prog-device: Prog-card/PC
10. Standard: CE/RoHS
Dimension: 45mm (l) * 35mm (w) * 10mm (h)
