CM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Its maximize product capacity can reach 1600pcs/h.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000mL
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output 1,200 to 1,600
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5 to 38mm
* Molding:
o Max mold plate dimension (L x W): 350 x 380mm
o Max mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
* Power 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
CM-12 blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and it is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm. Its maximize product capacity can reach 1000pcs/h.
1. Perfect function with economic investment.
2. Small size and compact construction with no space waste.
3. Easy to operate and maintain, operation by one person.
4. Saving power and uneasy to worn out, Adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
-
Key Specifications/Special Features:
* Widely used to produce various shape of plastic from PET
* With neck finish: 15 to 200mm
* Perfect function with economic investment
* Small size and compact construction with no space waste
* Easy to operate and maintain ,operation by one person
* Saving power and uneasy to worn out
* Adopting new double crank four bars to lock mould, the cross fixed
* Providing high pressure blowing system
* Container:
o Product material: PET, PP, PE
o Volume L: 10-25L (3-5 gallon)
o Theoretical output: 90 to 180 pieces/h
o Preform inner diameter: 15 to 200mm
* Moulding:
o Max mould plate dimensions (L x W): 420 x 500mm
o Max.mould thickness: 40 mm
o Clamping force: 330KN
o Mould opening stroke: 38mm
* Machine size and weight:
o Main machine (L x W x H): 218 x 77 x 196cm
o Main machine weight 1,000kg
o Heater (L x W x H): 237 x 68 x 165cm
o Heater weight: 380kg
* Power: 40kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
Molding machine
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000ml
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output: 600 to 800 pieces/H
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5-38mm
* Molding:
o Maximum mold plate dimension (L x W): 350 x 380mm
o Maximum mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
o Power: 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-A4 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 4000pcs/h.
1. Reasonable design, full automatic control, save power and labor. Adopt high quality components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Material: PET PP PE
* Pneumatic part:
o Valve SMC
o Cylinder SMC
* Electric part:
o PLC LG/Mitsubishi
o Operation system LG/Hitech
o Relay OMRON
o Infrared thermometer
o America raytek
* Electrical components adopts CE, UL, CCC approved international advanced high-tech product
* Output Depend on bottle design: 3,200 to 4,000 pieces/h
* Body diameter: 20 to 100mm
* Height: 50 to 350mm
* Neck diameter: 15 to 38mm
* Mould cavity four cavity
* Mould thickness: 240mm
* Mould 500 x 500mm
* Electrical source power 380/220V 3Phase 50/60Hz
* Power: 49kW
* Really use power 14kW
* Air source:
o LP air compressor 1.6m3/min 1.0MPa, one set (7.5kW)
o HP air compressor 1.0m3/min 3.0Mpa two set (each set 11kW)
o Air dryer 2.0m3/min 3.0MPa 1set
o Cooling water :Cooling water 15L/min
o Size (L x W x H): 1,908 x 1,858 x 1,920mm
o Weight: 3,600kg
o Auxiliary equipment
* Pre-form unscrambler is equipped:
o Size (L x W x H): 276 x 106 x 186mm
o Weight: 250kg
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-A2 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 2000pcs/h.
1. Reasonable design, full automatic control, save power and labor. Adopt high quality Components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Material: PET, PP, PE
* Pneumatic part:
o Valve SMC
o Cylinder SMC
* Electric part:
o PLC LG/Mitsubishi
o Operation system LG/Hitech
o Relay OMRON
o Infrared thermometer
o America raytek
* Electrical components adopts CE, UL, CCC approved international advanced high-tech product
* Output depend on bottle design: 1,800 to 2,000
* Body diameter: 20 to 100mm
* Height: 50 to 350mm
* Neck diameter: 15 to 38mm
* Mold cavity to cavity
* Mold thickness: 240mm
* Mold 500 x 500mm
* Electrical source power 380/220V 3 Phase 50/60Hz
* Power: 25kW
* Really use power: 6kW
* Air source:
o LP air compressor 1.0m3 1.0MPa 1 set (7.5kW)
o HP air compressor 0.73 3.0MPa 2 set (each set 11kW)
o Air dryer 1.03 3.0MPa 1 set
o Cooling water: cooling water 10L
o Size (L x W x H): 1,908 x 1,280 x 1,920mm
o Weight: 2,000kg
o Auxiliary equipment
o Pre-form unscrambler is equipped:
* Size (L x W x H): 276 x 106 x 186mm
* Weight: 250kg
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-8Y heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Its maximize product capacity can reach 1000pcs/h.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Heat-resistant bottle blow-molding machine
* Suitable for producing PET plastic containers and bottles from 10-2,000ml
* Used to produce carbonated bottle, mineral water pesticide bottle, oil bottle cosmetics wide mouth bottle and hot fill bottle
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Can produce PET bottles which can resist high temperature, such like 92 deg. C
* For traditional juice and other liquid food packing
* Container:
o Material: PET, PP and PE
o Volume: 0.1-2L
o Theoretical output: 600 to 800 pieces/H
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5 to 38mm
* Molding:
o Maximum mold plate dimension (L x W): 350 x 380mm
o Maximum mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
* Power: 24.8kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
