Qingdao Jinlihua Textile Machinery Co., Ltd

Working range Polyster yarn
Reed width (cm) Nominal:150, 170, 190 , 210, 230 260, 280 330 360
Useful reeding width:reduct 0-60cm
Filling selection 1 color 2 color at will
Weft density rang 6-60pick/cm
Motor 3.5kw, 4.6kw selected according to the certain model
Shedding Plain type 2-8pcs heald frame
Positive cam machine, 4-10pcs heald frame
Dobby(mechanical), upper negative dobby or electronic dobby, 2-16 heald frame (according to customer¡¯s demands)
Let-off Electronic let off-elo
Mechanical let-off
Flange diameter:800mm
Take-up Mechanical take-up
Electronic take-up
Upper and down temple(according to the varity of fabric)
Waste filling removel Mechanical take-up 3 roller
Cutter Mechanical cutter
Operation Start ¨c driven by rush start motor.Stop by electromagnetic brake at prgrammed position
Arrange, run, forward inching, reverse inching, programmed position stop after
One cycle reverse rotation.
Beating Crank beating, sword beating system oil bath lubrication system.
Filling insertion : Single pump (plunger type spring pressure system)
Double nozzle (needle type ceramic ) stbilizer system
Feeler ¨c ir feeler or opf feeler, using optical cable.
Yarn package stand Floor mounted horizontal stand for ¨c 4 package.(2 colour )
Catch cord Spindle twisting system.
Temple Top mounted, 2 barrel type with 2 ring each.
Water suction Slit tube suction (blower type ).


Export standard packing.

This series machine are new and improved models,desighed to increase overall machine architecture to expand the beams supporting area,machine stabilty.
Models can be matching pairs of single pump spray dual punp,dual jet ,double pump ,three jet ,e-free jet weft selection ,cam shedding ,dobby shedding .
2.
water jet loom Main technical parameters
Oprional rate:Maximum 2280m/minute
Number of heald frame piece:
a)Plain loom up to 8
b)cam openings loom 2,4,6,8,10 film
c)a maximum of 16 Dobby Loom
Installed power:3.5kw,4.6kw
Weft density range:6-60pick/cm
Speed:the designed maximum speed 1200rpm/min(actual speed according to the fabric sizing)
For yarn type:
(1)nylon filament(2)nylon with wire-free pulp(3)multi-resin raw silk(4)Multiple lipid retractable wire(5)Multiple lipid rayon(6)multi-resin hard twist yarn(7)Multiple lipid extension wire (8)Multiple lipid-free pulp with silk(9)elastic fiber yarn (10)lmitation silk cotton.


Export standard packing.

JLH9200m model looms are designed through completely new three-dimension technology, computer analysis & assembly, and utilized the virtual technology in designing of the insertion, shedding, beating and looping. It filled the blank of air jet terry looms in China. With the perfect performance of high speed and wide weavability, it becomes one of the best towel weaving machines in the world

ADVANTAGE :
>> High speed
>> Wide weaveability
>> Easy operating
>> Reliable quality
>> Perfect environmental protection

JLH9200 m model looms are designed through completely new three-dimension technology, computer analysis & assembly, and utilized the virtual technology in designing of the insertion, shedding, beating and looping. It filled the blank of air jet terry looms in China. With the perfect performance of high speed and wide weavability, it becomes one of the best towel weaving machines in the world.

Power saving
Power saving has been fully considered in the design of this model looms. Weft insertion can be made by low air pressure. And equipped with a valve between any two sub-nozzles; this can reduce the air route to minimum, so 10% air consumption can be saved.

JLH425S air jet loom-medical gauze making machine for hosptial
Machine Main Specification
Model:JLH425S
working width:190cm 210cm 230cm 280cm 340cm
shedding:crank shedding only can make plain fabric
weft feeder:electronic single nozzle  /double nozzle(recommend)
Heald frame:2pcs (it is enough for making gauze fabric)  
Let-off & take-up:mechanical/electronical(recommend)  
Accessories of each machine
Warp beam&cloth roller:1.5pcs per set
Wire healds& dropper:3000pcs per set
Reed:1pcs per set  
Motor&Voltage:1.5kw-3.0kw(depends on the working width)  380V,50HZ /by customer's order  
Speed:450-620 R.PM (depends on the working width)  
Air consumption:0.65CBM-0.80CBM(depends on different working width
Production of gauze fabric(40s x 40s -26x18):1600-2000m per day

JLH425 Mecial gauze bandage making air jet loom :

Reed width 190cm,210cm,230cm,260cm,280cm,320cm,340cm,360cm
feeder electronic feeder
nozzle single nozzle,double nozzle
shedding plain/cam/dobby
frame 2pcs/4pcs/6pcs or more

Let-off Mechanical/Electronic
Take-up Mechanical/Electronic
Cloth roller Normal/jumbo package
Edge Selvage edge/tuck-in selvage
Gauze fabric type
(1pc or 2pc or 3pc at same time)

Cotton yarn count
(S) Warp & Weft density (pick per inch) Gauze width
(inch) Production
(m/day)
40 x 40 26x18 36"-134" 730-1200
40 x 40 16x14 36"-134" 940-1530
32 x 32 31 x21 36"-134" 620-1020
10 x 10 40 x20 36"-108" 650-900

We are TOP 1 manufcturer of gauze product making machinery in china , not only gauze weaving machine we are available ,but also the whole gauze prodction line we can supply  including  warping machine,bleaching machine,gauze machine.