Kammprofile gasket
Got kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, ptfe, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange.
410 basic type kammprofile gasket
410l kammprofile gasket with outer ring (integral type)
410lm kammprofile gasket with outer ring (split type)
Model 410lm split type metal toothed gasket with outer ring, can choose richer metal, e.G. Carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410l, and the lining metal can be repeatedly used.
Product application:
Got toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25mpa
Reinforced graphite gasket
Double jacketed gasket
Product application:
Got is particularly suitable for heat exchanger, gas pipeline, cast iron flange, cylinder head and boiler, and other containers.
Generally, when installed, it can press the initial thickness of the gasket to get a 30% deformation, thus can effectively seal the unevenness and small defects of the flange. Through choosing different metal and different fillers, it can suit to different mediums.
Spiral wound gasket
Got-400 spiral wound gasket is accumulated, hovered and wound, and spot welded beginning and end terminal by v-shaped or w-shaped stainless steel and non metal filler, which has good compression elasticity, and is suitable for the sealing parts with temperature and pressure altering violently. It is a static sealing parts used for such flange connecting joints as pipeline, valve, bump, heat exchanger, tower, manhole, and hand hole, etc. It is widely applied in departments as petrochemical, mechanical, electric power, metallurgy, boat building, medical, atomic energy, and aerospace
Non asbestos sheet
Service range:
Item
Style
630
630-1
630-2
Density g/cm3
1.8~2.0
1.8~2.0
1.8~2.0
Tensile strengthí²mpa
6
9
12.5
Compressibility í²%
12ía5
12ía5
12ía5
Recovery í²%
40
45
45
Aging coefficient
0.9
0.9
0.9
Stress relaxation ín%
45
45
45
Steam sealing
Tmax: 200íµ
Pmax: 2~3mpa
30min no leakage
Tmax: 300íµ
Pmax: 4~5mpa
30min no leakage
Tmax: 400íµ
Pmax: 8~9mpa
30min no leakage
Tmax: íµ
200
300
400
Pmax: mpa
1.5
3.0
5.0
Resistance to media
Water, steam, and salt solutions, etc.
Normal color: black, red, green-white, blue, etc.
Available with inner lined iron wire mesh, copper wire mesh, or 304 steel wire mesh (43*m)
Also available with graphite coating (43*g) or anti-stickú¿43*s
With single face your logo on request.
Available dimension:
Thickness: 0.4~5mm
20001500mm; 15004000mm;
15001500mm; 1350x1500mm
15001000mm;12701270mm; 38101270mm
Asbestos rubber sheet
Got asbestos rubber sheet is made from selected asbestos fiber, natural rubber, filling material and dye. A price worthy quality of dependable performance, in addition, being suited to many sealing requirements makes this jointing the most economical sheet packing choice in the wide range of industrial fields.
Service range:
Item
Style
680
680-1
680-2
680-3
Tensile strengthí²mpa
9
12
15
19
Aging coefficient
0.9
0.9
0.9
0.9
Loss on ignitionín%
30
30
28
28
Compressibilityí²%
12ía5
12ía5
12ía5
12ía5
Recoveryí²%
40
40
45
45
Density
G/cm3 g/cm3
1.6~2.0
Tmax: 0c
200
300
400
450
Pmax: mpa
2.3
3.5
5.0
6.0
Resistance to media
The jointing parts of equipments and pipelines and flanges using water, steam, diluted acid & alkali, etc. As the medium, under the responding grade temperature and pressure.
Lower grade on request
Available color: purple, red, black, grey etc.
Available with inner lined iron wire mesh, copper wire mesh, or 316.304 steel wire mesh, etc.
Also available with graphite coating or anti-stick
With single face your logo on request
Normal dimension:
Thickness: 0.4~5mm
20001500mm; 15004000mm;
15001500mm;1350x1500mm
15001000mm;12701270mm;
38101270mm
38102700mm ú¿newú¬
Wooden case
