Air filter
compressed air filter
1). Separator filter (HF9)
For bulk liquid removal plus a 3 micron coalescer (5ppm w/w maximum remaining oil content)
Two-stage filtration
* First stage: two stainless steel orifice tubes provide 10 micron mechanical separation
* Second stage: in-depth fiber media captures solid and liquid particles to 3 micron
2). Air line filter (HF7)
For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two-stage filtration
* Firt stage: captures larger particles with alternate layers of fiber media and media screen
* Second stage: coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media
3). High efficiency oil removal filter (HF5)
For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: multiple layers of bonded, blended fiber media for fine coalescence
* Second stage: multiple layers of bonded, blended fiber media for fine coalescence
Outer coated, closed cell foam sleeve
4). Ultra high efficiency oil removal filter (HF3)
For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.001 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: coated, closed cell foam sleeve acts as pre-filter and flow disperser
* Second stage: multiple layers of matrix blended fiber media for ultra-fine coalescence
Outer coated, closed cell foam sleeve
5). Oil vapor removal filter (HF1)
For removal of oil and hydrocarbon vapors normally absorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* first stage: stabilized bed of finely divided carbon particles removes the majority of the oil vapor
* Second stage: multiple layers of fiber media with bonded micro fine carbon particles remove the remaining oil vapor
Multiple layers of fine media prevent particle migration
Outer coated, closed cell foam sleeve prevents fiber migration
Designed life is 1000 hours under rated conditions.
Air dryer(desiccant air dryer) hsd-10wxf
Desiccant compressed air dryer (heatless purge and externally heated purge)
1). Heatless purge desiccant air dryer
Inlet temperature: 0~45 celsius degree
Inlet oil content: 0.01ppm
Working pressure: 0.6~1.0mpa
Dew point: -20~-70 celsius degree
Purge air: 12%
Desiccant: activated alumina & molecular sieve
Purge mode: heatless purge
Working method: continuing alternation between two towers
Working periods: t=10~20min.
Control mode: micron computer auto controlling
Installation mode: indoor, non-basement
2). Externally heated purge air dryer
Inlet temperature: 0~45 celsius degree
Working pressure: 0.6~1.0mpa
Dew point: -40~-70celsius degree
Purge air: 4~6%
Desiccant: activated alumina & molecular sieve
Purge mode: externally heated purge
Working method: continuing alternation between two towers
Working periods: t=120~140min.
Control mode: micron computer auto controlling
Installation mode: indoor, non-basement
Sterile filter
* adopt 6 grades element which complement with America UPS plastic biology
* element material is SPF who is good at hydrophobe, precision to be 0.01um.It can filter bacterium, virus & phagocyte.
* o ring seal (silica rubber and fluorine rubber), ensuring to filter air 100%.
* unique outer heat-resistant polypropylene.It can stand 140 celsius degree steam bacterium removal and will not reduce its precision if repeat sterilizing.
* stainless steel of housing, polishing of internal, max.Working pressure to be 1.0mpa.
* operation temperature less than 80 celsius degree .
Inlet pressure: 0.6~1.0Mpa
Inlet temperature: 5~65 celsius degree
Initial pressure drop: less than 0.005Mpa
Filter route: 5um
Water removal rate: less than 99%
Outlet air oil content: less than 10ppm
Low Dew Point Combined Compressed Air Dryer
Working pressure: 0.6~1.0Mpa
Pressure drop: less than 0.05Mpa
Inlet temperature: less than 45 celsius degree (Normal temp. type)
Inlet temperature: less than 80 celsius degree (High temp. type)
Dew point: -40~ -70 celsius degree
Cooling watre temperature: less than 32 celsius degree
(water cooling type)
Purge air: 3~5%
Control mode: Micro-program controller
Installation mode: Indoor, non-basement
Desiccant Compressed Air Dryer two types ---heatless purge and externally heated purge
1). Heatless purge desiccant air dryer
Inlet temperature: 0~45 Celsius degree
Inlet oil content: less than 0.01ppm
Working pressure: 0.6~1.0Mpa
Dew point: -20~-70 Celsius degree
Purge air: less than 12%
Desiccant: Activated alumina & molecular sieve
Purge mode: Heatless purge
Working method: Continuing alternation between two towers
Working periods: T=10~20min.
Control mode: Micron computer auto controlling
Installation mode: Indoor, non-basement
2). Externally heated purge air dryer
Inlet temperature: 0~45 Celsius degree
Working pressure: 0.6~1.0Mpa
Dew point: -40~-70 Celsius degree
Purge air: less than 4~6%
Desiccant: Activated alumina & molecular sieve
Purge mode: Externally heated purge
Working method: Continuing alternation between two towers
Working periods: T=120~140min.
Control mode: Micron computer auto controlling
Installation mode: Indoor, non-basement
Screw air compressor
Piston air compressor
Centrifugal air compressor
Refrigerated air dryer
Refrigerated impressed air dryer
1). Air-cooling refrigerated air dryer
Inlet temperature:
Normal inlet temperature45º
High inlet temperature80º
Cooling method: air-cooling
Ambient temperature: 38º
Design dew point: 1.7º
Refrigerant: r-22
Inlet pressure: 0.2~1.0mpa
Pressure drop: 0.02mpa
2). Water-cooling refrigerated air dryer
Inlet temperature:
Normal inlet temperature: 45º
High inlet temperature: 80º
Cooling method: water-cooling
Design dew point: 1.7º
Refrigerant: r-22
Inlet pressure: 0.2~1.0mpa
Pressure drop: 0.02mpa
Cooling water inlet temperature: 32º
Cooling water inlet pressure: 0.2~0.4mpa
Holysun offers two types of Refrigerated Air Dryer:
1). Air-cooling refrigerated air dryer
Inlet temperature:
Normal inlet temperature: less than 45 celsius degree
High inlet temperature: less than 80 celsius degree
Cooling method: Air-cooling
Ambient temperature: less than 38 celsius degree
Dew point: 2~10 celsius degree
Refrigerant: R-22 /R-134a
Inlet pressure: 0.2~1.0MPa
Pressure drop: less than 0.02MPa
2). Water-cooling refrigerated air dryer
Inlet temperature:
Normal inlet temperature: less than 45 celsius degree
High inlet temperature: less than 80 celsius degree
Cooling method: Water-cooling
Dew point: 2~10 celsius degree
Refrigerant: R-22 /R-134a
Inlet pressure: 0.2~1.0MPa
Pressure drop: less than 0.02MPa
Cooling water inlet temperature: less than 32 celsius degree
Cooling water inlet pressure: 0.2~0.4MPa
High-efficiency Compressed Air Condenser (water-cooling)
Inlet pressure: 0.2~1.0Mpa
Inlet temperature: 140 celsius degree
Outlet temperature: 45 celsius degree
Cooling water inlet temperature: 32 celsius degree
Cooling water inlet pressure: 0.2~0.4Mpa
