Efficient crushing-type mills are widely used in metallurgy, mining, chemical, cement, coal gangue, construction, sand, refractory material, ceramic and other industrial and mining enterprises, engaged in breaking and crushing the material in the operation. It is mainly suitable for crushing various soft and hard ore. whose compression strength is not higher than 320MPa (MPa)
Features:
1. High production and high crushing ratio.
2. Low power consumption, homogeneous particle size.
3. Simple, compact and light mechanical structure.
4. Low investment cost, easy management.
Structure and working principle£º:
Efficient crushing mill consists mainly of frame, rotor, hammers and grizzly bars and other components. The frame includes upper part and lower parts, which are welded by steel plates after cutting, the remaining parts bolted into one. High manganese steel liners are studded with inside the frame, to facilitate replacement for a new liners after worn; on the main shaft are installed several groups of the spindle distribution of the hammers, which consists of rotor with the axle of hammers and rotary table. The host drives the main shaft through the motor and V-belt driven spindle to rotate the rotor, generating the centrifugal force, then driving all hammers stretch around. The bulks of material feed into the crushing chamber, will be crushed by the hammers at a high-speed movement. The broken material requested will be passed the grizzly bars at the lower part and discharged, the unbroken rest will be left in the chamber to be crushed repeatedly by the hammers and iron plates until it can reach the requested standard. To avoid clogging, the water content of the material to be crushed not more than 5%.
The performance parameters of efficient crushing-type mills:
Model PC4008-75 PC4012-90 PC4015-132
Diameter of the rotor (mm) 750 900 1150
Length of the rotor(mm) 800 1200 1500
Rotation speed of the rotor (r/min) 800-1000 800-1000 700-1000
Max. input size(mm) <100 <100 <100
Max. output size(mm) 0-3 0-3 0-3
Capacity (t/h) 10-25 30-50 40-75
Motor power(Kw) 55-75 75-90 110-132
No. of the hammers(piece) 10 16 24
Dimension
(L*W*H/mm) 1800*1650*1800 2200*2100
*2200 2860*2500*2500
Note: This specification is just reference, any changes are subject to the products.
T130X Superfine Grinding Mill is mainly used in processing powder of mineral materials of metallurgy, building materials, chemical industry, mining, etc. It can grind non-flammable and non-explosive materials with moisture less than 6% such as Feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramics, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, slag, slag, activated carbon, dolomite, granite, iron oxide yellow, bean cake, chemical fertilizer, compound fertilizer, fly ash, bituminous coal, coke, lignite, Ling U.S. sand, gold, red mud, clay, Kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, muddy green rock, leaf wax rock, shale, purple rock, Diego rock, basalt, gypsum, graphite, insulation material, etc.
Equipments:
The complete set of T130X grinding mill consists of mainframe, reducer, classifier, maintenance platform, blower, collector, electric controller, etc.And some auxiliary equipments such as jaw crusher, bucket elevator, electromagnetic vibration feeder and hopper, etc.
Working Principal:
Large materials are crushed by jaw crusher into required size for mainframe, then the crushed materials are elevated to the hopper by bucket elevator£¬then to the grinding chamber for grinding by vibrating feeder evenly and continuously. The powder goes upwards with the airflow, after separating by the classifier, those which can meet the fineness requirement enters into the collector through pipes for separating and collecting, and discharged from the discharged valve as finished products. The airflow is sucked into blower through wind recycling pipe at the upper part of cyclone power collector. And the closed airflow circulation system with negative pressure ensures the environmental health of production line site.
Technical Date:
1) Mainframe parameters
Item Unit Specifications &Technical data
Quantity of roller pcs 4
Diameter of roller x Height mm 410x210
Diameter of ring x Height mm 1300x210
Rotation speed rmp 103
Max. feeding size mm <30
Output size mm 0.074x0.038
Capacity t/h 4£13
Weight t 18.
Note:
(1) Capacity in the table is referred to calcite, under the condition of 80% passing though.
(2) Any change of parameters and shape shall be subject to the usage and maintenance manual instruction with delivery.
SCM series S super thin mill is also called Micronizer , Industrial Mill, Micron Grinding Mill ,Micron Grinding Mill £¬Ultrafine Mill, Micro Powder Mill which is a kind of Mill, Grinder, Grinding Mill, Milling Machine.
On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden, SCM Series S Micro-power Grinding Mill .the latest industrial micro-power grinding mill, is a new type grinding machine for producing micro-power.
SCM series S super thin mill can grind calcite,limestone,calcite,dolomite,kaolin,bentonite,talc,illite,pyrophillite,barite,meerschaum,fluorite,potash ore and other more than 200 kinds of material that Moh's hardness is blow 9,non-explosive,non-flammable minerals.
Model : SCM6015 , SCM8021 , SCM10027
Roller number: 15, 21, 27
Diameter (mm) : ¦µ600, ¦µ800 , ¦µ1000
Ring number:1¡Á3,1¡Á3,1¡Á3
Main unit speed(mm):235,235,173
Max. feeding size(mm):10, 10, 20
Final size (mesh): 325-2500, 325-2500, 325-2500
Capacity (kg/h): 325-2500, 600-4000, 900-6800
Overall dimension (m): 10¡Á2.3¡Á5.5, 13¡Á3¡Á5.8, 18¡Á4¡Á8.6.
By the Vibrating feeder, the material will be fed evenly and continuously into the room of the Storage Bin to grind. In the production line, the Vibrating Feeder can evenly feed the crushing material, and complete the primary screening.
Vibrating Feeder features its own superiorities: stationary vibration, reliable operation, long time service life. The vibrating force can be adjusted, and the flux can be randomly changed and controlled, very convenient to control. The vibration force is the source of vibrating motor. It is of low noise, low energy consumption, good performance. Vibrating feeder is of simplicity in structure, reliability in operation, convenience in adjustment, light in weight, small in size, convenience in maintenance. The dust contamination can be prevented when the closed structure is adopted.
Model:GZD-180*80,GZD-200*120,GZD-300*90,ZSW-380*96,ZSW-420*110,ZSW-490*110,ZSW-490*130,ZSW-600*150.
Capacity (t/h): 30-80,80-500,40-100,90-200,150-350,180-380,250-450,450-800,600-1000.
Max.Feed Size(mm):300,300,300,500,580,580,750,800.
Vibrating Screen is also called Vibratory Screen,Vibrosieve, Screen, Circular Vibration Screens, Sieve, Sieving Eequipment, shaking screen, Inclined Screen,Circular Vibrating Screen,Vibrating Riddle, Screen Machine.
For Vibrating Screen, the amplitude can be adjusted. It is of long screening line, multi-layers screen, correct to screen in all kinds of specification ,high efficiency in screening, so widely used in mine selection and sand stone crushing.
Model:2YA1237,3YA1237,2YA1548,3YA1548,2YA1848,3YA1848,2YA1860,3YA1860,4YA1860,2YA2160,3YA2160,4YA2160,2YA2460,3YA2460
Spec.of Screen: 1200*3700 mm,1200*3700,1500*4800,1500*4800,1800*4800,1800*4800,1800*6000,1800*6000,1800*6000,2100*6000,2100*6000,2100*6000,2400*6000,2400*6000
Layers: 2,3,2,3,2,3,2,3,4,2,3,4,2,3
Sieve Pore Size(mm): 3-50,3-50,5-50,5-50,5-80,5-80,5-80,5-80,5-80,5-100,5-100,5-100,5-150,5-150
Max. Feed size: 200 mm,200,400,400,400,400,400,400,400,400,400,400,400,400
Capacity: 7.5-80,7.5-80,50-208,50-250,50-260,50-300,50-300,50-350,50-350,100-500,100-500,100-500,150-700,150-700.
Trademark: SHIBANG
Standard: ISO9001:2000
Unit Price/Payment: TT/LC.
Sand Washing Machine is also called Sand Washer, Washing Machine, Wash Equipment, Sand Gravel Washer , Sand Cleaning Machine, Sand Washing Equipment, Sand Cleaning Equipment.
XSD series High-efficient Sand Washing Machine, which is used for washing away the stone power and impurity in the sand made by the Sand Making Machine, to increase the sand quality, is a necessary equipment to wash sand in coordination with the sand making machine.
XSD series high-efficient Sand Washing Machine, on basis of the practices in sand and stone industry, designed by our professionals. This series product possesses the good qualities that high cleaning, reasonable structure, high capacity, energy saving, low sand loss. The special design for the transmission part separating with water and sand enables its low maintenance. It is the best choice for our customers.
It is always used in washing, grading and dehydrating quartz and sand in Construction Site. Sand stone Factories, Hydropower Station and Concrete Dam Site, Pre cast Concrete Factory, Glass Factory and etc.
Models: XSD2610, XSD3016,XSD3620
Impeller Specification (mm) (D,W): ¦2600,1000, ¦3000,1600,¦3600X2000.
Capacity (t/h): 20~50, 50~120,120-180
Feed Size (mm): ¡Ü10, ¡Ü10,¡Ü10
Overall Dimensions (L,W,H): 3320,2125,2670, 3810,2686,3085,4500,3206,3480.
Detailed Product Description:
Ball mill is widely used for milling various kinds of ores or rocks in metal and non-metal mining and building material industry.The main bearing of the ball mill with the shell diameter 900-2100mm is spherical liner bearing; for the shell diameter 2700mm,the main bearing is completely closed self-aligning 120,bearing withBabbitt alloy of high lead and low tin with low hardness,underneath laid withcooling copper piping full of water The bearing is of static pressure structurewith high and low pressure united oil lubricating system.
Our Ball Mill is the key equipment for grinding after the crush process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other materials able to grind.
The Ball mill Model: §¶1830*3000,§¶1830*6400,§¶1830*7000,§¶2200*5500,§¶2200*6500,§¶2200*7500
Weight of ball mill:11£¬23£¬25,30,30,23.
Introduction
Vertical Grinding Mill is a new kind of large scale power mill which is designed specially to solve the problems of low capacity and high consumption of industry mills. With a decade of yearsf+ research of mills, vertical grinding mill is designed and manufactured based on our advanced design idea, and in combination with the European technology and the market demand. It adopts reliable structure and reasonable process flow, integrated with drying ,milling, classifier , elevator. Especially ,it can fully meets the requirement of clients in the high production of powder and its main technical and economy indicator reaches the international level.
Hydraulic-driven track mobile plant is SBMs newest mobile crushing and screening plant, which is fully driven by hydraulic force and moves by chassis track. Its designed by our companies excellent engineers to meet growing market demand. It features high performance, high reliability, elegant design and top international techniques. This type of mobile plant can be widely used for crushing and screening in many areas such as road construction, building, metallurgical and energy industries, etc.
a. Conmins Diesel Engine of high performance makes this track mobile plant cost less oil, produce less noise and have a more reliable performance and provide an economical and environmental power. The engine can be additionally equipped with low temperature preheating start-up device to ensure the machine easy to start under the condition of minus 25 temperature.
b. Employing fully rigid boat structure, the chassis features high strength, low contact pressure, good passing ability(easy transportation) and good adaptability to hilly and marsh areas.
c. High pulling forque travel motor with mature techniques offers strong driving force and high reliability. The use of all-walt variable hydraulic technique in the travel system ensures high performance, reliability and utilization of the motor. The main hydraulic devices like pump, valve are imported from Japan.
d. Operating system with imported direct servo technique can be easily and precisely controlled and travel in a infinite variable speed.
e. Crushing and screening equipments are of our company's advanced products, which have compact conformation and stable performance. The screen equipment set by 20 degree obliquity improves the screening ability.
SBM company one of the most famous rock and mineral processing company in the world, is launching a new comprehensive portable plant for efficient fully mobile crushing.
Features of portable impact crushing plant main unit:
High capacity, efficiency, economy, high adaptability, crushing-screening, self-loading conveyor.
Fixed method of whole mobile crusher (Routine way).
Choose the working place, Level the place, Transport the mobile crusher to the reasonable place¡úExtend the elevating landing leg Dig a hole under the fixed leg. The holes size is up the soil. If the soil is loosening, please dig deeper and larger. Fix the active leg to the fixed leg with binder bolt¡ú Fill the hole of active leg with concrete¡úAdjust the face of concrete after congealing, retract the elevating landing leg. Putting some crosstie or supporting tools under the vehicle will better steady the whole machine.
Shibang SCM series super thin mill is on the basis of our company's production experience for more than 15 years. We absorb advantages from the same trade abroad and at home. We review, research and try on 12 kinds of mills and horizontal hammer crushers. And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial.
This SCM series S super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone.
The MTW series mills adopt bevel gear integral transmission, inner light-oil lubrication system, arc whirl tube and another proprietary technology.
Features:
1, Bevel gear integral transmission: the traditional mill needs decelerator and ratcheting to drive the main shaft that increase the centering difficulty and is easy to bring noise as well as reduce the efficiency. Mtw series mills adopt bevel gear integral transmission that compact the whole structure and simplify the installation as well as improve the efficiency.
2, Inner light-oil lubrication system: the traditional millsf+ lubrication adopts grease lubrication which increases the resistance of lubrication, creates high inherent temperature and shortens the service life of bearing. Mtw series mills adopt light-oil lubrication achieve the lubrication of bearing without oil pump and lubrication station.
3, Arc whirl tube: the traditional mills adopt board-type whirl tube that increases the resistance, reduces the performance, and stops the air flow and so on. Mtw series mills adopt arc whirl tube reduce the resistance and avoid the air-stop and so on.
4, Curved surface shovel with changeable edge: the traditional mills adopt quick wear edge and edge combine with shovel. If the edge is worn, all of the shovel should be changed that increase the cost and the stop time. The edge of mtw series mill adopts wearable alloy materials which improve the service life. The changeable edge is easy to change that save time and cost. The traditional flat shovel make the materials accumulate in one level that reduces the ring and roller service life. The curved surface shovel makes a vertical material liner which increases the working face and capacity.
Shibang medium speed trapezium mill is widely used in many industrial fields, such as building, chemical, chemical fertilizer, metallurgy, mining, nonmetal, abrasive, bearing materials, ceramic, steel, thermal power, bricks & tiles, coal industry, etc. The medium speed trapezium mill can grind these materials which are 9 or less on the meshes scale, and moisture is below 6%., and they should be non-explosive and non-flammable mining materials. The final size can be adjusted from 30 to 400 meshes easily. There are thousands of materials our machine can grind.
Shibang mtm medium speed trapezium mill has lots of matchless advantages, and it adopts the latest national mill patents. The medium speed trapezium mill has features as follows: new designing, reasonable structure, smaller size, lower energy consumption, longer service life, and less consumption of wearing parts, higher performance cost ratio, etc. All its technical performance has reached leading and international level.
MXB Coarse Powder Mill is a kind of new high-tech milling machine to meet the requirements of coarse powder processing customers. It is the ideal equipment to replace Raymond Mill, ball mill, and other traditional mill.
Technology Advantages:
High efficiency of wear material, wear evenly, the lifetime is three times higher than that of Raymond Mill; High percentage of sand can be produced by this machine.
PFW series impact crusher improves the adjusting device, the operation becomes more convenient. The tri ¨C cavity makes excellent capability in the fine crushing and super fine crushing line. The bi-cavity can simplify the process flow in the coarse crushing line.
Benefits:
1. Bearing adopts the integrated cast-steel structure, which ensures the perfect match with crusher frame. Meanwhile, it greatly increases the radial intensity of bearing seat.
2. Unique fixing device of blow bar brings higher reliability.
3. Reformative adjusting device decrease the time of machine stop and overhaul.
4. Self-own open-top device can quickly finish the replacement of wearing parts.
5. Larger bearing specification and higher carrying capacity.
6. Rotor analysis ensures stableness and reliability.
Shanghai Shibang Machinery Co., Ltd, one of the most famous rock and mineral processing company in the world, is launching a new comprehensive portable plant for efficient fully mobile crushing.
YG938E69 portable crushing plant concept is fully adaptable to all mobile crushing needs, it set up a new range of business opportunities for contractors, quarry operators, recycling and mining applications. It can eliminate the obstacles of the crushing places and circumstances, and offer the high efficient and low cost project plants for the client. To the client, it is the best choice.
YG938E69 portable crushing plant highlights:
1. PE Series high performance jaw crushers.
2. Incorporated the feeder and vibrating screen into the crusher.
3. Everything on board: crusher, feeders, screens, belts and power installations.
4. Quick road transportation thanks to king pin arrangement.
5. Installation support legs on the track quick to set-up.
6. Electric motor and control cabinet are on the same truck.
SBM is a world-leading company in the field of making rock and mineral processing machine, which has equipped tens and thousands of crushers around the world since the late 20th century. Nowadays, the PEW jaw crusher in European style undoubtedly becomes the most welcome products in the world. When you want to crush the hard materials in high efficiency, the best choice for you is the PEW series of jaw crushers in European style, which adopts the most advanced international crushing technology as well as the world-class skills in making.
VSI5X series vertical shaft crushers adopt Germanic advanced technique and obtain many proprietary intellectual property rights and the patent technology as well as integrate with three types of crushing who have been the core equipments in sand making industry. The new type of high-efficiency crushers obtains the following advantages:
1, Optimized deep-cavity rotor improve the material throughput by about 30%.
2, Part-worn around protecting plate can be reversed end for end to use again which improve the operating factor by more than 48%.
3, Assembled hammer reduces the cost by more than 30%. In addition, adding the assistant hammer which protects the frame when the main hammer is worn.
4, The core wear resistant material adopts the American high-standard wear resistant material.
5, Adopting the lozenge impact plate protects the frame better.
SBM-Vertical shaft impact.:
SBM VSI crusher is designed by reputed German expert of Shibang and every index of SBM VSI crusher is in world's leading standard. SBM VSI crusher incorporates three crushing types and it can be operated 720 hours continuously. Nowadays, SBM VSI crusher has replaced hammer crusher, roller crusher, roller ball mill, etc. and become the mainstream equipment in sand making business.
Technological advantages:
SBM VSI crusher incorporates three crushing styles its feeding style incorporates material on material, materials on iron and falling at sides. Customers can adjust the machines according to their own demand. SBM VSI crusher realizes multiple functions in one machine, which is a big breakthrough in sand making field.
Excellent performance and long service time:
1.Special light oil lubrication systems ensures the temperature to be within 25f?
2.Brand new automatic protection device provides the machine with vibrating, oil filtering and warning system
3.New type oil filting system ensures the bearings and other transmission system are not abraded and peolong their service time
4.Choice wearable materials prolong the service time of the machine by 40%. So the cost is lowered by more than 40%.
Model: VSI7611 VSI8518 VSI9526 VSI1140.
Model:VSI 7611
Capacity (t/h): Feed both at center and at sides:120-180 Feed at center:60-90
Max feed size (mm): soft material ?35 hard material?30
Rotation speed (r/min): 1700-1890
Power (kw) : 110-150
Overall dimension L*W*H (mm) : 3700*2150*2100
Weight (t) : 7.8.
Model: VSI8518
Capacity (t/h): Feed both at center and at sides: 200-260 Feed at center: 100-130
Max feed size (mm): soft material?40 hard material?35
Rotation speed (r/min): 1520-1690
Power (kw) : 180-220
Overall dimension L*W*H (mm) : 4140*2280*2425
Weight (t) : 10.3.
Model: 9526
Capacity (t/h): Feed both at center and at sides: 300-380 Feed at center:150-190
Max feed size (mm): soft material?45 hard material?40
Rotation speed (r/min): 1360-1510
Power (kw) : 264-320
Overall dimension L*W*H (mm) : 4560*2447*2778
Weight (t) :16.
Model:VSI1140
Capacity (t/h): Feed both at center and at sides:450-520 Feed at center: 225-260
Max feed size (mm): soft material?50 hard material?45
Rotation speed (r/min): 1180-1310
Power (kw) : 400-440
Overall dimension L*W*H (mm) : 5000*2700*3300
Weight (t) :25.6.
HPC series cone crusher with high-efficiency and hydraulic pressure was widely used in mining, concrete factory, sandstone making, etc. The machinery's pressure resistance strength is under 350Mpa. And they are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc.
Features and Benefits
1.The new series of HPC cone crusher with high-efficiency and hydraulic pressure equipment is adopted three protecting equipment such as protecting oilcan, locking oilcan and hydraulic driving oilcan. They not only protect the machinery, but could deal with troubles without disassembly the parts.
2.The equipment also can adjust the size of final material. The machinery with high dependability operated very expediently.
3. The crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material.
4. In the special circumstances such as irons was feed into the crushing chamber together with the materials and there is a jam in the crushing chamber, the hydraulic equipment could open the cover automatically, then the products could output successfully. It greatly reduced the trouble of stopping the machine to output the products artificially. Which makes the maintenance more convenient and with low cost.
5.It is adjusted by hydraulic device and lubricated by the dilute oil. And with locking sleeve assembly, it can overcome the trouble of oil and water being mixed together.
6.The concave and mantle made by high manganese steel. Owing to the change of the concavef+s style and the protect of the crushed products, The abrasion of the machine is reduced greatly and can last long compared with the old cone crusher.
Shibang series of jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. Jaw crushers are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200mpa, that is, suitable for primary crush. Jaw crushers can be used in mining, metallurgical industry, construction, road and railway building, water conservancy, chemistry, etc.
HCS Series cone crusher features
Comparing with other kinds crusher, HCS Series Symons cone crusher have excellences for fine crushing, high productions and low maintenance. The long force arm designed into the HCS Series Symons cone provides greater crushing force.
And the spring release system generates more opposing force than other cone crushers. So use in mine industry widely.
The impact crusher which is a kind Rock crusher that employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.
Features and Benefits of our impact crusher:
1.Our impact crusher is of High reduction ratio and crushing efficiency
2. No-board connection; The blow bar of our impact crusher with high chrome(high chromed blow bar).
3. Impact plate with a special shape.
4. Crushed product of impact crusher with cubical shape.
5. Easy maintenance and reliable operation.
Type:PF-1010,PF-1210,PF-1214,PF-1315£¬PFV-1010£¬PFV-1210,PFV-1214,PFV-1315
Spec.: ¦1000*1050,¦1250*1050,¦1250*1400,¦1300¡Á1500,¦1000¡Á1050,¦1250¡Á1050,¦1250¡Á1400,¦1320¡Á1500
Feeder Opening (mm):350,350,350,350,350,350,350,350
Crushing Capacity (t/h):,50-80,70-120,80-160,160-260,50-80,70-120,130-180,150-220
Motor Power (KW): 55-75,110-132,132-160,180-260,55-75,110-132,132-160,180-220
Weight (t):12.6,14,18.6,24.2,13.2,15.2,18.6,24.5.
Symons cone crusher is a kind of crusher, stone crusher, rock crusher, crushing machine, crushing plant, rock crusher models which is also called gyratory crusher.
Features of Symons Cone Crusher :
Comparing with other kinds crusher, Symons cone crusher have excellences for fine crushing, high productions and low maintenance. The long force arm designed into the Symons cone provides greater crushing force.
And the spring release system generates more opposing force than other cone crushers. So use in mine industry widely.
Standard Symons Cone Crusher Technique paramete
Type:CSB75,CSB110,CSB160,CSB240,CSB315,
Dia. of cone mm (inch): 900 (3'),1200 (4'),1295
(4 1/4'),1650 (5 1/2'),2134 (7')
Countershaf (r/min):580,485,485,485,435.
Power (kw):75,110,160,240,315.
Weight (ton): 15,20,27,55,110.
Overall dimension (mm):2821x1880x2164,2821*1974*2651,2800x
2342x2668,3911x2870x3771,4613x3251x4732.
