Belt conveyor
The conveyors consist of standard parts, which are advanced and simple in structure, easy to maintain. Our vibrating equipment is adaptable for stationary and mobile crushing plants. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump materials, or packaged materials. According to different transferring equipment, the transfer system can be one independently or multi-conveyors or combined with other transfer equipments. The belt conveyor can be installed horizontally or aslope to meet the needs of different transfer lines.
The belt conveyors produced by sjlc can be operated in the temperature situation ranging from -20¦ to 40¦. The temperature of transferred material by this belt conveyor should be lower than 50¦.
Belt width(mm)
Fbelt length (m) /power (kw)
-s--m/--(kw)belt speed(m/s) -s---capacity(t/h) -s---
400_12/1.51220/2.24 2025/3.57.51.31.64080
500_12/31220/45.5 2030/ 5.57.51.31.64080
650_12/41220/5.5 2030/7.5111.31.6131323
800_6/4615/5.5 1530/7.515 1.31.6278546
1000_10/5.51020/7.5112040/11121.32.0435853
1200_10/7.51020/11 2040/15301.32.06551284
Scm series s super thin mill
This SCM series S super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, lime stone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone, so many stones or you can call them rocks.
Features and Benefits
* High efficiency In same condition of finished particle size and power of motor, the output is 40% higher than airflow mill and whisk mill.
* High using rate of the quick-wear part In same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher. It can be generally one year.
* High safety Because there are no axle tree and bolt in the grinding antrum, there will be no wearout of bearing and sealingpart, also no loose of bolts.
* Environmental protection It will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement.
Structural Characteristic
The whole system of the SCM series S super thin mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.
Model: SCM6015
Roller number: 15
Diameter (mm): »600
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 350-2500
Overall dimension (m): 10x2x5.5
Model: SCM8021
Roller number: 21
Diameter (mm): »800
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 600-4000
Overall dimension (m): 12.4x2.x5.8
Model: SCM1027
Roller number: 27
Diameter (mm): »1000
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 900-6000
Overall dimension (m): 14.5x3.8x6.3
Note: This specification is just reference, any changes are subject to the products.
5. SCM series S super thin mill
Technological advantages:
SBM VSI crusher incorporates three crushing styles; its feeding style incoporates material on material, materials on iron and falling at sides. Customers can adjust the machines according to their own demand. SBM VSI crusher realizes multiple functions in one machine, which is a big breakthrough in sand making field.
Excellent performance and long service time:
1.special light oil lubracation systems ensures the temperature to be within 25f¦
2.brand new automatic protection device provides the machine with vibrating, oil filtering and warning system;
3.new type oil filting system ensures the bearings and other transmission system are not abraded and peolong their service time;
4.choice wearble materials prolong the service time of the machine by 40%. So the cost is lowerd by more than 40%.
Model: VSI7611 ; VSI8518; VSI9526; VSI1140
Model:VSI 7611
Capacity (t/h): Feed both at center and at sides:120-180; Feed at center:60-90
Max feed size (mm): soft material ·+35; hard material·+30
Rotation speed (r/min): 1700-1890
Power (kw) : 110-150
Overall dimension L*W*H (mm) : 3700*2150*2100
Weight (t) : 7.8
Model: VSI8518
Capacity (t/h): Feed both at center and at sides: 200-260; Feed at center: 100-130
Max feed size (mm): soft material·+40 ; hard material·+35
Rotation speed (r/min): 1520-1690
Power (kw) : 180-220
Overall dimension L*W*H (mm) : 4140*2280*2425
Weight (t) : 10.3
Model: 9526
Capacity (t/h): Feed both at center and at sides: 300-380; Feed at center:150-190
Max feed size (mm): soft material·+45 hard material·+40
Rotation speed (r/min): 1360-1510
Power (kw) : 264-320
Overall dimension L*W*H (mm) : 4560*2447*2778
Weight (t) :16
Model:VSI1140
Capacity (t/h): Feed both at center and at sides:450-520 ; Feed at center: 225-260
Max feed size (mm): soft material·+50 hard material·+45
Rotation speed (r/min): 1180-1310
Power (kw) : 400-440
Overall dimension L*W*H (mm) : 5000*2700*3300
Weight (t) :25.6
Jaw crusher
The series of our jaw crusher include 11 models which can meet most capacity requirements in primary and secondary crushing, at the same time, with low power consumption and easy maintenance. Every feature of these machines has been carefully designed to provide superior quality and performance. The high capacity of this machine can be ensured by the large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw. The jaw has a smaller discharge setting, allowing for a higher degree of flexibility with relative equipment. The machine is easy to install and debug. They are widely applied in areas of mining, metallurgical, construction, smelting, hydraulic and chemical industries, etc and widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc. These crushers are recommended by leading consultants in this field and are used by hundreds of customers all over the world.
Model
Feed inlet
Size(mm)
Max inlet
High-pressure micropowder grinder
The high-pressure micropowder grinder is a new type of high-efficiency, which is developed by the engineers through several years' hard work depending on the production experiences.It adopts the fineness grading technology from germany and japan and tackles the difficulty in classifying super-powders. It is mainly used in super-powder processing with more than 500 kinds of materials, such as feldspar, talcum, barite, marble, limestone, charcoal blacks, and china clay, with a fineness of 500 meshes (25um) to 2500 meshes (5um) and the minimal fineness of 3500 meshes (3.55um).
Specification
Parameter type
Itemygm7826ygm8327ygm9531
Number of rollers
(pcs)334
Diameter of rollers
(mm)260270310
Internal diameter of ring
(mm)780830950
Rotational speed of main unit
(r/min)160140130
Max. Feeding size
(mm)+20+20+20
Capacity
(kg/h)50-50065-680150-1000
Motor of the main unity225s-8-18.5y225m-8-22y225s-4-37
Motor of the blowery160l-4-15y180m-4-22y220l-4-30
Motor of the classifiery160m-4-6y160m-6-5.5y160m-6-7.5
Total power
(kw)37.544.574.5
Overall dimension
(m)4.5*4.2*5.15.3*4.1*5.27.1*5.9*7.9
Weight
(t)
Diameter of final particle
(mesh)500 mesh to 1250 mesh, the finest can reach 2500 mesh
High-pressure suspension grinder
High-pressure suspension grinder is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. It can produce powder from various non-flammable and non-explosive mineral materials with mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.
Specification
Nameunitspecification
Quantity of grinding rollerspiece5
Grinding roller, diameter x heightmm410x210
Grinding ring, diameter x heightmm1280x210
Rotation speed of the main framerpm103
Max. Feeding sizemm30
Product finenessmm0.95~0.044 (the finest is up to 0.038)
Capacityton/hour5~8
Overall dimension: lxwxhm7850x8000x9700 or 9200x7250x9700
Total weightton26.1
Basic unitsunitespecifications and technical parameters
Motor of main unitmodely280s-4
Powerkw75
Rotatingrpm1480
Motor of classifiermodelyct200-4b
Powerkw7.5
Rotatingrpm125~1250
Motor of elevatormodely100l2-4
Powerkw3
Rotatingrpm1430
Motor of blowermodely250m-4
Powerkw55
Rotatingrpm1480
Motor of jaw crushermodelpe250x400
Y180l-6
Powerkw115
Rotatingrpm970
Electromagnetic vibration feedermodegz2f
Powerwatt150
