ECAN-401S is a small intelligent protocol conversion product independently developed by Chengdu Ebyte Electronic Technology Co., Ltd. The product uses 8V, 28V wide voltage power supply, integrates 1 CAN-BUS interface, 1 RS485 interface, 1 RS232 interface and 1 RS422 interface, which can realize two-way conversion between CAN and RS485/RS232/RS422 different protocol data. The product supports serial AT command configuration and host computer configuration device parameters and working modes, and supports five data conversion modes including transparent conversion, transparent conversion with logo, protocol conversion, Modbus RTU conversion, and user-defined (user). At the same time, ECAN-401S intelligent protocol converter has the characteristics of small size, easy installation. It has a very high cost performance in the development of CAN-BUS products and data analysis applications. It is an engineering application and project debugging. And reliable assistants for product development.
EoRa-S3-900TB wireless module development test board is a development test kit based on Espressif's ESP32-S3FH4R2 chip and Ebyte LoRa module. The development board integrates a Type-C interface, E22-900MM22S LoRa module, 0.96-inch OLED display, SD card slot, lithium battery charging circuit and its power supply circuit.
The distributed IO expansion module adopts an scalable design in structure and needs to be used with our M31 series distributed IO host
E220-230T30S is a new generation of LoRa wireless serial port module (UART), based on Semtech's original LLCC68 chip solution design. It has a variety of transmission methods, works in the (220.125 ~ 236.125MHz) frequency band (default 230.125MHz), LoRa spread spectrum technology, TTL level output, compatible with 3.3V and 5V IO port voltage.
Based on PANCHIPs RF chip PAN3031,the E29-T series products are a new generation of wireless serial port module(UART)independently developed by Chengdu Ebyte Electronics Co., Ltd.Its with a variety of transmission methods,working in the frequency band 410.125ï½? 493.125MHz (default 433.125MHz),and using industrial-grad high-precision 32MHz crystal oscillator.
E18-2G4Z27SI is a small-sized 2.4GHz SMD wireless modulo Zigbee, which is designed and produced by Chengdu Ebyte. The space between each pin is 1.27mm. E18 series have been put into stable bulk production, they are applicable for various applications (especially smart homes).
E103-W05A is a low-cost, cost-effective 100mW (20dBm) wifi data transmission module, the module is small in size, onboard PCB antenna, working in 2.4~2.483GHz band, low power consumption, fast data transmission, the module can use serial port for data transceiver and AT command related parameter Settings, secondly.
E180-2G4Z20SX is a ZigBee module designed and produced by Chengdu Ebyte for fast wireless connection, easy to add, small size, low power consumption, high reliability, working in the 2.4GHz frequency band, with an internal integrated power amplifier, and the maximum transmit power up to 20dBm. The zigbee3.0 module integrates fast and easy-to-use self-organizing network functions, reducing complexity and greatly simplifying the complex development process of wireless products, allowing your products to be quickly put into the market at a lower cost.
E860-DTU(2020-400SL)A wireless remote synchronization switch is a terminal device that realizes remote transmission of switching signal through LoRa modulation technology. It supports 2 channels of switching input (DI) and 2 channels of control relay output (DO). The core of its function is to realize remote synchronous control without wiring, and is highly easy to use, allowing users to quickly integrate it into their own systems.
E95-DTU(900SL30-485) is a wireless data transmission DTU that uses military-grade LoRa modulation technology It has a variety of transmission methods. It works at (868/9151M) frequency band. The DTU provides a transparent RS485 interface, plastic shell. rail type installation structure, support 8~28V voltage input.
E810-DTU (RS) is a high cost-effective RS232 to RS485/RS422 isolated interface bidirectional converter independently developed by Chengdu Ebyte Electronic Technology Co., Ltd. This product is featured by its small size, simple wiring, convenient installation, etc. It is a reliable assistant tool for engineering application, project debugging and product development.
E78-470LN22S (6601) is a standard LoraWan node module designed and produced by Ebyte. It works in the frequency band CN470~510MHZ. It supports CLASS-A/CLASS-C node types and supports two network access methods: ABP/OTAA. At the same time, this module has It has multiple low-power consumption modes, and the external communication interface adopts standard UART. Users can access the standard LoraWan network through simple configuration through AT commands. It is an excellent choice for IoT applications.
E106-915G27P2 comprises complete and cost efficient LoRaWan gateway module in the industry standard PCI Express Mini Card form factor, which enables an easy integration into an application board and it is also ideal for manufacturing of small series.
NE2-D11 single serial port server is used to realize the two-way transparent transmission of data from serial port to Ethernet port. It has a variety of Modbus gateway modes and MQTTC/HTTPC Internet of Things gateway modes,which can meet the networking functions of various serial port devices/PLC; Adopt industrial design standards to ensure the reliability of equipment.
The E103-W12 series is an ultra-low power WiFi module developed by Chengdu Ebyte Electronics Co., Ltd. based on the Dialog DA16200 SoC chip that supports IEEE 802.11b/g/n. It has a built-in high-performance ARM Cortex-M4 processor and works at 2.4~2.4835 GHz frequency band, the maximum wireless transmission power can reach 20dBm. The module supports IEEE802.11 b/g/n standard. The module supports AP and STA modes, supports multiple network transmission protocols such as TCP/UDP/HTTP/MQTT, and can maintain WIFI connection in low power consumption mode.
NB183 serial server independently developed by Ebyte integrate the TCP/IP protocol stack, which can realize two-way transparent transmission of data from serial port to Ethernet port,Modbus protocol conversion, serial port device cloud and other functions. The industrial design ensures the stability of the equipment in the harsh working environment,and the rich indicator light effects are used to feedback the different working states of the equipment.
E32-433T20S is a wireless serial port module (UART) based on SEMTECH's LoRa solution. It has a variety of transmission modes, working at 410MHz~441MHz, (default 433MHz), LoRa spread spectrum technology.
