The LDWL1901 Electric/ Li-battery Powered Rail Bolt Wrench is portable type used for fastening and loosening the nuts from M30-M36, high working efficiency with light weight and replaceable battery.
PODUCT SPECIFICATIONS
Model
LDWL1901
Dimension(mm)
850*330*150mm
Rated voltage (DC.V)
24V
Battery pack capacity (Ah)
24-48
Weight:
12.2kg
Type
fishbolt
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
M22x135mm, M24x140mm
Place of Origin
China
Hubei
Brand Name
Linkage
Model Number
M22x135mm, M24x140mm
Standard
GB
Grade
4.8/8.8/10.9
Material
Q235
This hydraulic rail bending machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed
parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable
for all types Rails. The machine has simple structure, convenient operation, safe
operation and easy maintenance. It is an effective tool for rectifying rail joint problems
Model
FMG-2.2
Working Pressure
47 MPa
Max. bending force
900 kN
working stroke
120 mm
Pivot point distance
1200mm
Machine size
1435x696x 385 mm
Weight
80kg
Switch Rail Clamp
Scope of use of portable hook lock:
1. Lock switch when repairing switch signal switch machine.
2. Lock the switch when passing the special train.
3. When temporary power failure occurs, the train runs and locks the switch.
4. Closed special line lock special line turnout.
5. Line new switch lock new open switch open.
6. Lock the switch during the construction of the special line.
Model LJ-GSQ
Type Switch Rail Clamp
Material Stainless Steel
Dimensions (L x W x H) 40*15cm
Weight 2kg
Rail Clamp
The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque.
· Allows suction jars to be attached to stand rail
· One rail clamp holds one canister
· Rail can hold up to four rail clamps and canisters
Specification
Model LJ-JJQ-C
Type Rail Clamps
Material Stainless Steel
Dimensions (L x W x H) 335mm*175mm*42mm
Application Rail Type 43,50,60kg
clamps of Gantry Crane Rail Changer for replace
Working Principle:
The rail gantry crane adopts the principle of gear and rack, and the gear side is equipped with safety insurance, which can avoid reverse rotation when the gravity is large, so as to prevent danger. The rail can be lifted by connecting the rail clamping hook at the bottom of the rack. Release the locking handle, and then push the rail lifting device through the guide rail of the fixed frame to realize the lateral movement.
The whole frame structure is adopted for the section rail transportation trolley, and nylon running wheel is set at the bottom, which has good insulation performance. The brake pad is set inside the wheel, and the running wheel can be braked through the handle cable.
Basic Structure:
The rail gantry crane is composed of column (support frame), cross beam, rail hook, rack, operating handle, locking handle, locating pin, safety hook, etc.
The trolley is composed of running wheel, brake pad, brake cable, brake handle, pushing handle, rack, locking plate, etc.
Switch Rail Clamp
Scope of use of portable hook lock:
1. Lock switch when repairing switch signal switch machine.
2. Lock the switch when passing the special train.
3. When temporary power failure occurs, the train runs and locks the switch.
4. Closed special line lock special line turnout.
5. Line new switch lock new open switch open.
6. Lock the switch during the construction of the special line.
Specification
Model LJ-GSQ
Type Switch Rail Clamp
Material Stainless Steel
Dimensions (L x W x H) (40*15cm
Weight 2kg
Track jack a device for raising railway track during ballasting or other track operations. Mechanical track jack is the simplest & sturdiest types of the jacks and widely used in Oil Fields, Railway Track Work,Ship Yards, Mining Operation, Construction &Heavy Duty Industrial Maintenance & Establishments. These Track jacks can be used to lifting both on down and up strocks. They're not only be lowered tooth by tooth but also can be made to tripped off by just moving the trip control.
Digital Magnetic Rail Thermometer
The digital display rail thermometer adopts PT100 linear temperature sensing the probe adopts copper embedded integrated technology has the function of waterproof and pressureproof and earthquakeproof and the product is designed with a railway track digital display thermometer with power prompt and power shortage alarm function
PRODUCT SPECIFICATIONS
Model JGGW1
Type Rail Thermometer
Temperature range 60100
Size 1087225cm
Maximum permissible 1
Power 012W
Weight 90g
NZMZ-20 Portable Sleeper Drilling Machine
This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator.
It is composed of:
* 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°;
* High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life;
* Ergonomic handle with throttle lever and engine safety lock;
* Safety system with centrifugal clutch;
* Possibility of inserting a lever able to rotate the drill bit in case of blockage;
* Quick coupling / uncoupling spindle of the drill bit.
Optionally we can supply:
* Drill bit protection and drilling depth regulator ;
* Trolley with 3 wheels for different types of track gauge;
* SleeperDrill Bits.
Specification
Modelï¼?NZMZ-20
Typeï¼?Sleeper Drilling Machine
Materialï¼?Stainless Steel
Dimensions (L x W x H)ï¼?420*500*1070mm
ENGINEï¼?2 stroke petrol engine, 1.42kW
Max. drill diameterï¼?20mm
Drill speedï¼?â?¥350r/min
Drill speedï¼?â?¤20s
Weightï¼?14kg
NZG31 Petrol Engine Rail Drilling Machine
This machine is an indispensable tool for railway maintenance construction and emergency repair operations It uses a hollow drill bit a screw nut clamping mechanism with quick opening function fast clamping accurate positioning fast drilling simple operation and safety use
PRODUCT SPECIFICATIONS
Model NZG31
Type Rail Drilling Machine
Material Stainless Steel
Dimensions L x W x H 650 230 250mm
Internal combustion engine fourstroke petrol engineHonda
Engine Power 12kW
Idle Rev 270rmin
Borehole diameter 9836mm
Drilling time 25s
Machine weight 17kg
Place of Origin Hubei, China
Type Sleeper Drilling Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 420*500*1070mm
Brand Name Linkage
ENGINE 2 stroke petrol engine 1.42kW
Max. drill diameter 20mm
Drill speed â?¥350r/min
Drill speed2 â?¤20s
Weight 14kg
NZMZ-20 Portable Sleeper Drilling Machine
This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator.
It is composed of:
* 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°;
* High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life;
* Ergonomic handle with throttle lever and engine safety lock;
* Safety system with centrifugal clutch;
* Possibility of inserting a lever able to rotate the drill bit in case of blockage;
* Quick coupling / uncoupling spindle of the drill bit.
Optionally we can supply:
* Drill bit protection and drilling depth regulator ;
* Trolley with 3 wheels for different types of track gauge;
* SleeperDrill Bits.
NZG31 Petrol Engine Rail Drilling Machine
This machine is an indispensable tool for railway maintenance construction and emergency repair operations It uses a hollow drill bit a screw nut clamping mechanism with quick opening function fast clamping accurate positioning fast drilling simple operation and safety use
Place of Origin Hubei China
Type Rail drilling Machine
Material Stainless Steel
Dimensions L x W x H mm 800340400 mm
Brand Name Linkage
Product name Rail Cutting Machine
Place of Origin Hubei
Idle Rev 270rmin
Borehole diameter 9836mm
Power of petrol engine 12kW
Spindle RPM 250 285 rmin
Drilling time 25s
Specification linear velocity 400 32 4 70m s
Engine type fourstroke petrol engineHonda
weight 17kg
NZG-31 rail drilling machine is compact in structure, and it is the lightest drilling machine in China at present. The rail
clamping device has self-locking function, accurate positioning and high drilling accuracy. The n-tailed hollow drill bit can be used to clamp the special twist drill with n-tailed shank under 13.5 according to the needs. It has the function of automatic water supply when drilling. It is a necessary tool for maintenance, rush repair and overhaul operation of Public Works Department.
Advantage
1. The water supply at the back of the main shaft is adopted to prevent the cooling water from entering the bearing and reducer, so as to improve the service life of the equipment.
2. When drilling, the rotary resistance is reduced and the drilling torque is increased.
3. The drilling time is shortened and the production efficiency is improved.
Specification
Model
NZG-31
Type
Rail Drilling Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
650 * 230 * 250mm
Engine type
four-stroke petrol engine
Engine Power
1.2kW
Idle Rev
270r/min
Borehole diameter
9.8 36mm
Drilling time
25s
Machine weight
17kg
Place of Origin Hubei, China
Type Other
Material alumunium
Dimensions (L x W x H) (mm) 300*300*150mm
Brand Name Linkage
Product name Railway track maintenance equipment
Usage petrol Rail Drilling Machine
Application petrol Rail Drilling Machine
Standard crcc
Quality Control iso
Certificate CE
Warranty 1YEAR
Customize yes
Model NZG-31
Engine GX50 4-stroke petrol engine, air-cooled.
Power 1.47kW
Spindle revolution 7000r/min
Fuel tank capacity 0.63L
drilling time 40s/hole
NGM-5.1 Rail Profile Grinding Machine
This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The
development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly
improve the profiling accuracy and polishing efficiency.
BENIFITS
â?? Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled
â?? Equipped with spark protection device
â?? Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone
â?? Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it
Specification
Model NGM-5.1
Type Rail Profile Grinding Machine
Material Stainless Steel
Dimensions (L x W x H) 1500 * 450 * 750 mm
Engine HONDA GX270
Power 5.1 kW
Grinding wheel specifications �?125x65 mm
Feeding accuracy 0.1 mm
Turning angle of grinding stone �±90�°
Spindle revolution 4100r/min
Grinding stone feeding stroke 42 mm
Profile wheel span 1000 mm
Weight 100 kg
Weight of supporting rod 14 kg
Hydraulic Railway Track Jack
It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations.
Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc.
Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track
Specification
Model YBD-245A
Type Hydraulic Railway Track
Material Stainless Steel
Rated lifing force/ Rated lining force(kN) 245/145
Maximm lifting Quantity/ lining quantity(mm) 135/95
Weight(kg) 23
NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The rail grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The frog and switch grinding machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency.
NCM-5.1
Engine Honda GX270 Petrol engine
Power supply 5.1kw
Spindle revolution â?¥3900r/min
Grinding stone inclination 30
Grinding stone feeding stroke 80mm
Grinding stone feeding accuracy 1mm
Weight 117KG
BENEFITS
1. Smart and Portable
The size of the horizontal rod is about 300mm, and the vertical rod is about 250mm. The ruler body is smart and portable.
2. LCD Digital display, easy to read.
3. High Accuracy
The measurement accuracy can reaches 0.01mm.The measurement results can be display instantly
4. Multifuncional, Wide range of application .
It can measure five items to meet different requirements:
1) The descent height value of the switch rail
2) The descent height value of the point rail
3) The height of check rail
4) The height of switch roller
5. This device is equipped with a simple calibrator ,could be used for quick calibration before each use
6. The measure head could be moved from side to side,suitable for all kinds distance tracks. Measure head could move range is 60mm,could be used for measuring different distance switch rail and point rail.
7. Replaceable measuring probe, suitable for different usage
When measuring the height of the switch rail and point rail relative running rail, using the flat measuring probe;
When measuring the rail surface dent, using the sharp measuring probe.
8. Metric /Imperial unit
Specification
Model LJ-JGJD-I
Type Switch Rail Gauge
Material Stainless Steel
Dimensions (L x W x H) (mm) 270*22*180mm
Measure range -5~30mm
Accuracy 0.05mm
Resolution 0.01mm
Working humidity 93%RH
Size 270*22*180mm
Weight 0.45kg
Power Button battery(1.5V)
Portable Rolling Track Gauge is mainly used for railway track gauge and superelevationcant check rail gauge and back to back distance measurementIt can be used for track inspection and fine adjustment of rail gaugeThis product has the advantages of fast measuring speed stable pushing rod easy to carryand nighttime and tunnel worklegible even in direct sunlight are supportedIt is an ideal measuring tool for track finetuning track constructioninspection and track laying
Features
The benefits of our rolling gauge
1 Measure the track gauge cant without bend over your back
2 Light weight around 65kg one person operation
3 BT connection data uploading and analysis system
4 High working efficiency Save your man power 1 man with 1 rolling gauge 4 man with 4 normal digital track gauge
Specification
Model 1435mm GJCJJG0
Track gauge 14101470mm
Superelevation measuring range 185185mm
Display mode OLED display and handheld terminal display
Supply Voltage DC34V52V rechargeable battery
Superelevation division value 005mm
Working temperature 3055
Insulation performance 1M
Track gauge division value 001mm
Superelevation division value 005mm
Track gauge max indication error 025mm
Superelevation max indication error 03mm
Length1700mm
Net Weight 65kg
Digital Track Gauge can directly read the measurement values of railway track gauge super elevation check rail gauge and back to back distance through microelectronics embedded and sensor technologies and OLED display screen
1 Large LED backlit display especially suitable for day outside and dark night
2 Quick calibration operation simple
measurement process
3 Large capacity batterylong standby time
4 Accurate measurementkeep longterm stability
5 Temperature
compensation working temperature is 3055
6 Insulated design
7 Antielectromagnetic interference
8 Waterproofcould use in
rainy day
9 power saving function no operation within 15 minutes the system will automatically shut down
10 Approval by CHINA ACADEMY OF RAILWAY SCIENCES
Mode1435mm GJCJG1
Track gaugemm 13841470
Gauge rail check gaugemm 13641450
Guard rail face gaugemm 13441430
Superelevation measuring rangemm 200200
Flange way Clearancemm 20107
Super elevation division valuemm 01
Track gauge max indication errormm 025
Super elevation errormm 045
Application rail line Railway speed less than 250kmh
Rail Profile Gauge
Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the railThe reasonable design makes it lightconvenient operation and intuitive reading
Features
1 Digital type with direct readings LCD display screen clear and readable No calculations requiredgives direct reading When reading hold down the HOLD button to fix the measurement value and facilitate reading
2 High measuring accuracy The measurement accuracy is 001m
3 Easy to use measure the vertical and lateral rail wear at the same time Position the rail wear gauge on the outer side of the rail Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectivelyThen the vertical and lateral wear of the rail can be read
4 Metric imperial unit
5 Support customize We could customize all kinds wear gauge according to different rail profiles and different measure points
6Fast calibrate Onekey zero clearing function can be quickly calibrated before each use to reach the factory measurement accuracy
7 Magnetic fixed part Strong magnetic fixed part to attach to the rail
8 Rail fillet as measuring base to ensure measure data more accuracy
Rail fillet is more clear than rail bottomno dust It could ensure the measure result reliability
9 Portable Handle This product is designed with a handle that is easy to hold which greatly improves the portability of the product It can avoid touching the ruler body directly cause the ruler body to be stained and corroded improve the product service life
Model LJGMA
Center vertical wear measure range 015mm
Lateral wear measure range 025mm
Score value 01mm
Indication error 0 15mm
Supply Customize UIC6060E1 UIC54 54E1 115RE 68TR ect all profiles
Block customize block for gauge
Digital Rail Frog Wear Gauge
Digital Rail Frog Wear Gauge is used to measure vertical wear value of frog point rail and wing rail at any sectionsAlso could be used for measuring decrease value of point rail relative to wing rail
Specification
Model LJZCMA
Type Digital Rail Frog Wear Gauge
Material Stainless Steel
Dimensions L x W x H 38016625mm
Measure range 040mm
Score value 001mm
Indication error 0 15mm
Working tempareture 1040
Main ruler measure range 0380mm
Switch Rail Height Gauge
Switch Rail Height Gauge is mainly used to measure the descent height value of the switch rail relative to the basic rail and point rail relative to the wing rail This instrument has the features of high measuring precision convenient calibration simple structure light weight and easy to carry Reasonable switch rail height can not only ensure train running safely and smoothly but also reduce the interaction between wheel and rail effectivelyreduce the dynamic stress of track structure keep the track in good geometric state thus reduce the maintenance workload
BENEFITS
1 Smart and Portable
The size of the horizontal rod is about 300mm and the vertical rod is about 250mm The ruler body is smart and portable
2 LCD Digital display easy to read
3 High Accuracy
The measurement accuracy can reaches 001mmThe measurement results can be display instantly
4 Multifuncional Wide range of application
It can measure five items to meet different requirements
1 The descent height value of the switch rail
2 The descent height value of the point rail
3 The height of check rail
4 The height of switch roller
5 This device is equipped with a simple calibrator could be used for quick calibration before each use
6 The measure head could be moved from side to sidesuitable for all kinds distance tracks Measure head could move range is 60mmcould be used for measuring different distance switch rail and point rail
7 Replaceable measuring probe suitable for different usage
When measuring the height of the switch rail and point rail relative running rail using the flat measuring probe
When measuring the rail surface dent using the sharp measuring probe
8 Metric Imperial unit
Model LJJGJDI
Type Switch Rail Gauge
Material Stainless Steel
Dimensions L x W x H 27022180mm
Measure range 530mm
Accuracy 005mm
Resolution 001mm
Working humidity 93RH
Size 27022180mm
Weight 045kg
Power Button battery15V
Analogue Rail Wear Gauge
Analogue Rail Wear Gauge is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it convenient operation and intuitive reading.
Benefits
Analogue Rail Wear Gauge is easy to operate,high reliability,small volume,light weight etc.
Specification
Model: LJ-GM-B
Center vertical wear measure range: 0-15mm
Lateral wear measure range: 0-25mm
Score value: 0.1mm
Supply Customize: UIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles
Block: customize block for gauge
Digital Rail Corrugation Gauge
Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement methodIt is mainly used for measuring rail top surface and side surface corrugation wear value
BENEFITS
Its simple in operation compact in size easy to carry high precision in measurement reliable in installation and positioning simple in use ConvenientEasy to site construction ensure the quality of work
Specification
Model LJBMA
Type Rail Corrugation Gauge
Material Stainless Steel
Dimensions L x W x H 1201224 cm
Horizontal measure range 1000mm
Vertical measure range 8 25mm
Accuracy 005mm
Resolution 001mm
Repeat error 002mm
Working temperature 5 40
Digital Switch Rail Lateral Wear Gauge
The Switch Rail Lateral Wear is used to measure the switch rail lateral wear and the descent height value of the switch rail this device can be used for all types of switch rail
BENEFITS
Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracyeasy to operatehigh reliabilitysmall volumelight weight etc
Specification
Model LJJGCMI
Type Switch Rail Lateral Wear Gauge
Material Stainless Steel
Dimensions L x W x H 315190200 mm
Vertical wear measure range 92193mm
Lateral wear measure range 0120mm
Resolution 001mm
Indication error 0 15mm
Rail Feeler Gauges
Rail Feeler Gauges is used for inspecting clearance
BENEFITS
Strong toughness, disassembly design, accurate measurement, not easy to rust
Specification
Model Number: LJ-SC1
Type: Feeler Gauges
Material: Stainless Steel
Dimensions (L x W x H): 30*15*5 cm
Weight: 135g
Blade thickness: 0.02mm, 0.03mm, 0.05mm, ,0.25mm, 0.30mm, 0.35mm ,0.40mm,0.45mm, 0.50mm, 0.55mm ,0.6mm ,0.7mm , 0.75mm, 0.8mm,0.85mm ,0.9mm, 0.95 mm,1.00mm.
Rail Feeler Gauges is used for inspecting clearance
BENEFITS
Strong toughness, disassembly design, accurate measurement, not easy to rust
Specification
Model Number: LJ-SC1
Type: Feeler Gauges
Material: Stainless Steel
Dimensions (L x W x H): 30*15*5 cm
Weight: 135g
Blade thickness: 0.02mm, 0.03mm, 0.05mm, ,0.25mm, 0.30mm, 0.35mm ,0.40mm,0.45mm, 0.50mm, 0.55mm ,0.6mm ,0.7mm , 0.75mm, 0.8mm,0.85mm ,0.9mm, 0.95 mm,1.00mm.
Digital Rail Straight Edge
Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear it includes reference
positioning frame and installed on the framework of reference positioning auxiliary positioning screw and the depth of the rail vertical abrasion side abrasion measured in feet its structure is simple intuitive and accurate measurement data and upper and lower rapidly operator safety its light weight convenient to carry
Benefits
Digital Rail Straight Measuring Ruler has the advantages of high measuring accuracyeasy to operateLCD digital display etc
Specification
Model LJZDI
Type Digital Straight Edge
Material Carbon Steel
Dimensions L x W x H 1201224 cm
Measurement range 5
Indication error 006
Measuring length 1000
Contact rail gauge for METRO measurement
The contact rail gauge is a gauge for measuring the parameters of the subway contact rail. Measurement parameters can be
customized according to customer requirments,detachable and easy to carry.
the main ruler body use high strengthsquare tube aluminum alloy.
advantages:precise measurement,new style,reasonable design.
Model: LJ-JCG-I
Vertical Measure range: customize
Horizontal Measure range: customize
Accuracy: 0.5mm
Digital Track Gauge
Digital switch Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge and back to back distance,flangeway clearance through microelectronics, embedded and sensor technologies and OLED display screen.
Features
1. Large LED backlit display: especially suitable for day outside and dark night
2. Quick calibration operation: simple
measurement process
3. Large capacity battery:long standby time
4. Accurate measurement:keep long-term stability
5. Temperature
compensation :working temperature is -30~+55
6. Insulated design
7. Anti-electromagnetic interference
8. Waterproof:could use in
rainy day
9. power saving function: no operation within 15 minutes, the system will automatically shut down.
10. Approval by CRCC
, CE certificate.
PRODUCT SPECIFICATIONS
Model (1435mm)
GJC-TJG1
Track gauge(mm)
1384-1470
Gauge rail check gauge(mm)
1364-1450
Guard rail face gauge(mm)
1344-1430
Superelevation measuring range
-200~+200
Flangeway Clearance
20-107
Display mode
OLED display and hand-held terminal display
Supply Voltage
DC3.4V 5.2V (rechargeable battery)
Working temperature
-30 +55
Track gauge division value
0.01mm
Track gauge max indication error
±0.25mm
Superelevation division value
0.05mm
Superelevation error
±0.3mm
Weight
2.5kg
Application rail line
railway speed less than 350km/h
Customize
1000 1067 1435 1520 1600 1676 track gauge are available
Platform Gauge
Platform gauge is usd for measuring the distance between the railway track center and the platform side and the height between the rail surface and platform plane.(Customizable)
Model
LJ-TC-I
Type
Platform Gauge
Horizontal measure range
1500-2200mm
Height measurement range
200-1300mm or customize
Accuracy
± 1 mm
Railway Work And Maintenance of Way Track Level And Line Measuring Tools Portable Laser Alignment Device
Laser Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device .
Railway Work and Maintenance of Way Track Level and Line Measuring Tools Portable Laser Alignment DeviceRailway Work and Maintenance of Way Track Level and Line Measuring Tools Portable Laser Alignment Device
Product Parameters
Model
LJ-BXJG
Type
Rail Laser Alignment Device
Material
Alluminium Alloy
Dimensions (L x W x H) (mm)
30*30*12mm
Laser measure distance
30m
Laser center spot
Type
Digital Rail Frog Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
380*166*25mm
Vertical Measure range
0~40mm
Score value
0.01mm
Indication error
â?¤ �± 0. 15mm
Main ruler measure range
0~380mm
Working tempareture
-10�ºC~+40�ºC
Certificate
CE
Standard
CRCC
NQGâ??5.1 Rail Cutting Machine
To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
Place of Origin Hubei, China
Type Rail Cutting Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 800*560*500mm
Brand Name Linkage
Engine GX270 petrol engine 5.1KW
Specification of cutting disc 400*32 *4mm
Cutting disc no. of revolutions 3320 r/min
Linear speed of cutting disc 70m/s
Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm
Cutting time 2 min ( cut off 60kg/m rail)
Weight 50kg
Place of Origin Hubei, China
Type Other
Material alumunium
Dimensions (L x W x H) (mm) 1500*400*250mm
Brand Name Linkage
Product name Hydraulic rail tamping machine
Usage Hydraulic rail tamping machine
Application Hydraulic rail tamping machine
Standard crcc
Quality Control iso
Certificate CE
Warranty 1YEAR
Customize yes
Other name track ballast tamping machine
function railway ballast tamping work
YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for
turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are
petrol, diesel and electric.
BENIFITS
â?? Engine types: Honda GX390 petrol engine or SF 190 diesel engine or electic engine.
â?? It is sitbl for the tamping operation in the new constuction of ordinary railway lines and the large-scaie or medium-scale
railway line maintenance
â?? It can complete the tamping operation of various types of concret seepers and wooden sleepers
â?? Equipped with automatic rail clamping device
â?? Equppped wih the f-tac walkin frame, the machine can be removed off at any place and any time
Place of Origin Hubei, China
Type Other
Material alumunium
Dimensions (L x W x H) (mm) 1900*1200*2500mm
Brand Name Linkage
Product name automatic rail tamping machine
Usage automatic rail tamping machine
Application automatic Hydraulic rail tamping machine
Standard crcc
Quality Control iso
Certificate CE
Warranty 1YEAR
Customize yes
Other name track ballast tamping machine
YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It
has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of
concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries.This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation
Place of Origin Hubei, China
Type Other
Material alumunium
Dimensions (L x W x H) (mm) 1200*400*550mm
Brand Name Linkage
Product name rail profile grinding machine
Usage rail profile grinding machine
Application rail profile grinding machine
Standard crcc
Quality Control iso
Certificate CE
Warranty 1YEAR
Customize yes
NGM-6.0 Internal combustion rail grinding machine, Itâ??s suitable for grinding rail welding seam, uneven joint, rail side fat edge,
rail surface repair welding of rail 43kg/m-75kg/m. Its grinding quality is good and itâ??s easy and simple to handle, and convenient
to be up on and down from the rail. Itâ??s an indispensable tool for railway engineering heavy repair, maintenance and first aid repair.
NGM-6.0
Engine 2 stroke petrol engine M165
Power supply 6.0kw
Spindle revolution â?¥3900r/min
Grinding stone inclination 0~90�°
Grinding stone feeding stroke 80mm
Grinding stone feeding accuracy 1mm
Grinding stone specification �?150x�?55x70mm
Weight 60kg
Rail wave grinding machine
The GBM-7.6 rail wave abrasion grinding machine is a professional machine used for the wave abrasion and grinding of the rail top.
This machine is suitable for various rails of 43~75kg/m.
Model GBM-7.6
Engine Honda GXV390, 7.6kW, single cylinder, air-cooled 4-stroke petrol engine
Power supply 7.6kw
Spindle revolution â?¥3600r/min
Profile wheel span â?¥1000mm
Grinding stone feeding stroke â?¥45mm
Grinding stone feeding accuracy â?¤0.11mm
Weight 85KG
Place of Origin Hubei, China
Type rail profile grinding machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 1410*500*850mm
Brand Name Linkage
Product name rail profile grinding machine
Profile wheel span: 1000mm
Engine 2 stroke petrol engine M165
Grinding stone speed: â?¥3900r/min
Grinding stone feeding stroke: 42mm
Fuel tank volume: 4.5L
Feed adjustment accuracy: 0.125mm
Power: 6.0kW
Grinding stone inclination: 0~90�°
Grinding stone specification: 150*55*70mm
NGM-6.0 Internal Combustion Rail Profile Grinding Machine
This Rail Profile Grinding Machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Place of Origin Hubei, China
Type Electric Rail Grinding Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 1200*420*900mm
Brand Name Linkage
Engine 2.2kW, 380V or 220V electric motor
Grinding stone speed 2860 r/min
Grinding stone specification 150*55*70mm
Grinding stone feeding stroke 50mm
Turning angle of grinding stone 90�°
Weight 80kg
Electric Rail Grinding Machine
The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90�°about the rail head by rotation of the machine using its turming device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
Place of Origin Hubei, China
Type Rail switch grinding machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 2100*1120*1030mm
Brand Name Linkage
Product name Rail switch grinding machine for track maintenance
function Rail switch point grinding
Engine Honda GX270 Petrol engine
Grinding wheel speed: â?¥3600r/min
Feed adjustment accuracy: â?¤l0mm
Weight â?¤117kg
Rated power: 5.1kW
Grinding wheel feeding stroke: â?¥80mm
Grinding wheel rotation angle: â?¥30�°
NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
LG-900 Hydraulic Rail Tensor
This machine can not only be used for repairing the broken rails of the seamless track, but also can be used for the stress relief of the seamless track and the adjustment of the track seam in sections of the ordinary track, and is suitable for various rail types. The use of this product can change the traditional method of repairing broken rails, that is, adopting rewelding without inserting short rails, which saves time and effort, expands the operating rail temperature range, and prevents the actual lock rail temperature from changing.
Specification
Model LG-900
Type Hydraulic Rail Tensor
Material Aluminium
Dimensions (L x W x H) 1450*780*650 mm
Working Pressure 67 MPa
Max. tensile force 900 kN
Max. compressive force 200 kN
Cylinder stroke 500 mm
Power supply Petrol engine or electric motor
Locking form Wedge iron lock
Weight 380 kg
YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric.
BENIFITS
Engine types: Honda GX390 petrol engine or SF 190 diesel engine or electic engine.
It is sitbl for the tamping operation in the new constuction of ordinary railway lines and the large-scaie or medium-scale railway line maintenance It can complete the tamping operation of various types of concret seepers and wooden sleeper
Equipped with automatic rail clamping device
Equppped wih the f-tac walkin frame, the machine can be removed off at any place and any time
Product Parameters
Model
YD-22
Type
Rail Tamping Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1300 * 750 * 1600mm
Engine
HONDA GX390 petrol engine
Power
7kW
Vibrating force
22kN
Vibrating frequency
66.7Hz
Hydraulic system working pressure
5~6MPa
Max insert force
16kN
Max clamping force
6.5kN * 2
Production efficiency
â?¥ 270 pieces / (group â?¢ hour)
Inserting depth
110mm ± 10mm (underneath the sleeper)
Weight
360kg
Rail Alignment Frame
GDJ-I Rail Alignment Frames for aluminothermic welding is a new tool for various of rails alignment, it's a special device used for rail alignment when thermit welding. It has the features of reasonable structure, good performance, perfect quality, and save laber.
Specification
Model
GDJ-I
Max. Hoisting force
15kN
Span
460mm
Weight
21kg
Dimension
600x540x170mm
This rerailer tool is specially developed to solve the problem of double track of train and mine car. Use left and right in pairs. Scope of application: running in the mine ground underground line of the car, due to overspeed, collision, line quality and other reasons, often derailment off track phenomenon, to production, safety has a great impact. Suitable for 24kg/m rail left and right in pairs.
The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy.
The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying .
The lightweight ,reliable and easy to use device offers unique measurement accuracy. It is easy to carry, and night-time and tunnel work.
Product Parameters
Model (1435mm)
GJC-JJG0
Track gauge(mm)
1410-1470
Superelevation measuring range
-185~+185
Display mode
OLED display and hand-held terminal display
Supply Voltage
DC3.4V~5.2V (rechargeable battery)
Superelevation division value
0.05
Working temperature
-30�ºC~+55�ºC
Insulation performance
>1M�©
Track gauge division value
0.01mm
Superelevation division value
0.05mm
Track gauge max indication error
�±0.25mm
Superelevation max indication error
�±0.3mm
Length
YD-22III Auto hydraulic tamping machine is an updated product based on the experience of domestic and foreign users on the tamping machine , using new materials and new technologies. This machine is suitable for the tamping operation after the large-scale and middle-repair cleaning operations of different types of rails and concrete sleeper lines ; it is also suitable for the tamping operation of the ballast on the newly-built line . The automatic hydraulic running function is added which can realize non-human Push forward or backward . The machine has superior performance , reasonable structure safety and reliability , and high operating efficiency , which fully meetsthe needs of railway ballast tamping operations
PRODUCT SPECIFICATIONS
Model
YD-22III
Type
Automatic Hydraulic Rail Tamping Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
2440*1860*2050mm
Engine
Honda GX390 four-stroke petrol engine9.5kw
Power
9.5kw
RPM
3600r / m
Hydraulic system pressure
5~6MPa
Vibrating frequency
66.7Hz
Exciting force
22KN
Clamping force
6.5KN*2 Inserting depth:110mm +10mm
Production efficiency
260 sleepers/ hour
Weight
1275kg
Railway Signal Light
It can be widely used in railroad , shipping and other traffic and transportation industries and some special industries as signal indication, safety warning and working lighting.
Model MSL4730
Type Railway Signal Light
Material Plastic
Dimensions (L x W x H) 66*170mm
Rated Voltage DC3.7V
Rated capacity 3.8Ah/3800mAh
Lift circle 100000h
Battery burn time-signal 12h
Battery burn time-lighting 10h
Bttery life circle 1000
Charging time 10h
Weight 0.25kg
Shell protection grade IP65
Features
The benefits of our rolling gauge :
1. Measure the track gauge, cant without bend over your back.
2. Light weight : around 6.5kg , one person operation.
3. BT connection, data uploading and analysis system.
4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge)
Specification
Model (1435mm)
GJC-JJG0
Track gauge
1410-1470mm
Superelevation measuring range
-185~+185mm
Display mode
OLED display and hand-held terminal display
Supply Voltage
DC3.4V 5.2V (rechargeable battery)
Superelevation division value
0.05mm
Working temperature
-30â?? +55â??
Insulation performance
1M�©
Track gauge division value
0.01mm
Superelevation division value
0.05mm
Track gauge max indication error
±0.25mm
Superelevation max indication error
±0.3mm
Length
1700mm
Net Weight
6.5kg
Material alumunium
Dimensions (L x W x H) (mm) 1500*400*250mm
Brand Name Linkage
Product name Hydraulic rail tamping machine
Usage Hydraulic rail tamping machine
Application Hydraulic rail tamping machine
Standard crcc
Quality Control iso
Certificate CE
Warranty 1YEAR
Customize yes
Other name track ballast tamping machine
function railway ballast tamping work
Packaging and delivery
Selling Units: Single item
Single package size: 280X150X150 cm
Single gross weight: 400.000 kg
Model
YD-22
Power supply
Two- stroke petrol engine : 6.6kW
Working Pressure
5Mpa
Working efficiency
260 slepers/hour
Tamping insertion depth
90~120mm under seepers
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
PRODUCT SPECIFICATIONS
Model
NQGâ??5.8
Type
Abrasive Rail Saw
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
4500 r/min
Specification of cutting disc
355x 25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm
Cutting time
110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
LJ-LDC2001 Electric Rail Cutting Machine
Lithium Battery Rail Cutting Machine is professional for rail cutting work.
Benefits
1. Passed the strict verification of protection grade, and supports the work in rainy and snowy weather;
2. Professional lithium battery which can support long time operation
3. Can be worked under under extreme conditions, such as high cold and high altitude;
4. Lithium battery passed the safety inspection of the national authority
5. Adjustable clamp , Suitable for cutting various type of rail.
6. Light weight , portable to carry and operate.
Specification
Model
LJ-LDC2001
Type
Electric Rail Cutting Machine
Material
Aluminium
Rated voltage (AC.V)
220
Motor power (Kw)
7
Weight (Kg)
13
Battery pack capacity(Ah)
12-20 Optional
Operating temperature range(°C)
-40~50°C
Product
Description
Model
D-3 Electric Tamping Pick
Power
350W
Material
Stainless Steel
Voltage
380V
Application
Tamping The Ballast
RPM
2880r/min
Exciting Frequecy
48HZ
Exciting Force
3kN
Pick Plate Form
Flexible
Weight
24kg
Oversize
675*150*255 mm
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Place of Origin China
Condition New
Material metal
Dimensions (L x W x H) (mm) 105*38*28
Product name Internal Combustion Tamping Hammer
Color red
Size M
peculiarity hard
MOQ 1pcs
Sample package description wooden box
Battery Powered Vertical Rail Tamper
The Battery Powered Vertical Rail Tamper is used for tamping and compacting the ballast to effectively correct track level errors.
Specification
Model
LJ-LZD2101
Type
Rail Tamper
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1050* 345 *450mm
Rated capacity of the power battery pack
24Ah
Weight
18 Kg (including 1.2kg spike)
Excitation force
4,100N
Tamper Pick amplitude
1.6 mm
Vibration frequency
136HZ
Intelligent power display
Display battery time and power
Waterproof grade
IP45
Total weight
18 Kg (including spike but not battery pack)
Magnetic Rail Versine Measuring Kits
Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
Specification
Model
LJ-XXJ
Type
Versine Measuring Device
Material
Plastic
Measuring Range
100m
Dimension
140*210*145mm
Weight
1.65kg
YQBJ-300*130 Railway Track Lifting and Lining Machine
This product has the fuction of lifting and lining. Its structure is simple, light, flexible, safe and reliable. This machine is
powered by Honda GX390 petrol engine, drives gear pump, and controls the work of each cylinder by multi-way reversing, valve, so as to realize the movement of machine in place, hook rail, tilt and lift.
PRODUCT SPECIFICATIONS
Model
YQBJ-300*130
Type
Railway Track Lifting and Lining Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1760*900*1500 mm
Engine
Honda GX390, 6.6 kW
Max. lifting force
150 kNx2
Max. lining force
130 kN
Max. lifting stroke
1020 mm
Max. lining stroke
â?¥310mm/time
System pressure
20 MPa
Operation handle working force
â?¤200N
Weight
550 kg
Type Railway maintenance equipment
Material Stainless Steel
Brand Name Linkage
Type Rail lift tools
Usage railway track maintenance
Product name Rail Carrying Tongs
Maximum opening 190mm
Steel plate thickness 19mm
Specification 2T/3T
Color Customized
Customized yes
Approved ISO9001
Warranty 1 year
This equipment is suitable for the old and new switching operation of rail, switch rail and frog point rail. There are running
wheels in the center of both sides, which can be carried out during transportation. It has the characteristics of adjustable
height, lateral adjustment, locking, light weight, convenient handling and wide application range.
The equipment can be equipped with section rail transport trolley, rail transport, switch rail and frog point rail operation
trolley.
Rated load
1T (one group)
Load-bearing
500kg
Stroke length
1M
Overall dimension
2410*700*1540mm
Weight (one set)
97 kg
Single unit weight
23 kg
Trolley weight
28 kg
It is a high precision, lightweight and portable tool for performing fast and reliable cross-sectional rail profile measurements to monitor and analyze the wear of rails. It is available for all type of rails, including grooved rails. Magnetically attached to the top of the railhead, the rail profile is measured in one single measurement in less than 5 seconds.
Each one is delivered with the innovative and user-friendly software package. It includes the app for Android for easy data collection in the field and the vast software package for basic and advanced data studies and analysis. It can suit any userâ??s needs for easy building of measurement schemes, batch processing, references, creating templates and macros, live alarms, trend analysis, wear, grinding, evaluation, equivalent conicity and much more.
Vertical, horizontal and angled wear are displayed instantly after each measurement in real time view. Numerous additional calculations and alignments are included in the powerful Envision software for basic to advanced data handling, analyzing and reporting.
This flatness measuring instrument is mainly designed for flatness measurement and recording in rail welding seam construction, maintenance and monitoring. It is widely used in construction and maintenance units of various seamless rail transit infrastructure construction and maintenance units, such as track maintenance departments, rail welding bases, construction engineering companies, subway construction and maintenance parties, scientific research institutes, etc.
YQBJ-300*130 Railway Track Lifting and Lining Machine
This product has the fuction of lifting and lining. Its structure is simple, light, flexible, safe and reliable. This machine is powered by Honda GX390 petrol engine, drives gear pump, and controls the work of each cylinder by multi-way reversing, valve, so as to realize the movement of machine in place, hook rail, tilt and lift.
Hydraulic Rail Puller Rail Tensor,its suitable for rail 50kg/m,60kg/m and 75kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. By locking the rail waist, it will not hurt the rail head surface, one machine with a variety of configuration meets the field work in different ways, it possesses features of unique design, light weight, simple & convenient manipulation and powerful rail pulling force. The machine can not only be used for repairing the broken rails of seamless tracks, but also can be used for stress relief of seamless tracks and section adjustment of track seams in common tracks, and is suitable for various rail types. Using this product can change the traditional method of repairing broken rails, that is, re-welding in situ without inserting short rails, saving time , Save labor, expand the operating rail temperature range, and prevent the actual lock rail temperature from changing.
Digital Rail Frog Wear Gauge
Digital Rail Frog Wear Gauge is used to measure vertical wear value of frog point rail and wing rail at any sections.Also could be used for measuring decrease value of point rail relative to wing rail.
Specification
Model
LJ-ZCM-A
Type
Digital Rail Frog Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
380*166*25mm
Measure range
0~40mm
Score value
0.01mm
Indication error
± 0. 15mm
Working tempareture
-10~+40
Main ruler measure range
0~380mm
Digital track gauge for railway track measurement
Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge and back to back distance through microelectronics, embedded and sensor technologies and OLED display screen.
Features
1. Large LED backlit display: especially suitable for day outside and dark night
2. Quick calibration operation: simple measurement process
3. Large capacity battery:long standby time
4. Accurate measurement:keep long-term stability
5. Temperature compensation :working temperature is -30~+55â??
6. Insulated design
7. Anti-electromagnetic interference
8. Waterproof:could use in rainy day
9. power saving function: no operation within 15 minutes, the system will automatically shut down.
10. Approval by CRCC, CE certificate.
Model(1435mm)
GJC-JG1
Track gauge(mm)
1410-1470
Check rail gauge(mm)
1381-1401
Back to back distance(mm
1338-1358
Superelevation measuring range
-185~+185
Superelevation division value
0.1
Track gauge division value
0.01
Track gauge max indication error
±0.25
Superelevation error
±0.45
Application rail line
railway speed less than 250km/h
Digital Rail Corrugation Gauge
Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value.
BENEFITS
It's simple in operation, compact in size, easy to carry, high precision in measurement, reliable in installation and positioning, simple in use Convenient;Easy to site construction, ensure the quality of work.
Specification
Model
LJ-BM-A
Type
Rail Corrugation Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
120*12*24 cm
Horizontal measure range
1000mm
Vertical measure range
-8 - +25mm
Accuracy
±0.05mm
Resolution
0.01mm
Repeat error
0.02mm
Working temperature
-5 - 40
Digital Rail Frog Wear Gauge For Railway Turnout Measurement
Digital Rail Frog Wear Gauge is used to measure vertical wear value of frog point rail and wing rail at any sections.Also could be used for measuring decrease value of point rail relative to wing rail.
Specification
Model
LJ-ZCM-A
Type
Digital Rail Frog Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
380*166*25mm
Vertical Measure range
0~40mm
Score value
0.01mm
Indication error
± 0. 15mm
Main ruler measure range
0~380mm
Working tempareture
-10~+40
Certificate
CE
Standard
CRCC
Benefits
Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development.
Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
Specification
Model
ZSH-20
Type
Versine Measuring Device
Material
Aluminum
Dimensions (L x W x H) (mm)
100*20*50mm
Measure range
20M
Weight
157G
Railway gap ruler for rail gap measurement
Railway gap ruler for rail gap measurement
Rail Feeler Gauge
0.02mm, 0.03mm, 0.05mm, ,0.25mm, 0.30mm, 0.35mm ,0.40mm,0.45mm, 0.50mm, 0.55mm ,0.6mm ,0.7mm ,
0.75mm, 0.8mm,0.85mm ,0.9mm, 0.95 mm,1.00mm.
Steel ruler
-2~17.5cm
Gap ruler
5-30mm
Railway Track Square
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track.
Features
1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm
2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance
3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely.
4.Customizable
5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation
6.Multifunctions
1ï¼?Measure the switch angle steel whether is square when installed
2ï¼?Measure the internal lock switch parts whether is square when installed
3ï¼?Measure the switch rail whether creeping
4ï¼? Measure the sleeper whether square when installed.
PRODUCT SPECIFICATIONS
Model
LJFG-I
Type
Railway Track Square
Material
Aluminum alloy
Size
1760mm
Wheel Back-to-back Gauge
Wheel back to back gauge is used to measure the inner distance of railway locomotive and rolling stock wheelset. Readings are digital display.
Specification
Model
GF982S
Type
Wheel Back-to-back Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
123*10*11 cm
Measuring range
1345-1365 mm
Accuracy
�±0.15mm
Resolution
0.01
Customized
Yes
Place of Origin Hubei, China
Type Gap Gauge
Material Stainless Steel
Dimensions (L x W x H) (mm) 35*15*5cm
Brand Name Linkage
Model NW-BB
Measure range 5-30mm
Material Stainless steel
MOQ 50
Packaging and delivery
Packaging Details Carton box
Selling Units: Single item
Single package size: 35X15X5 cm
Single gross weight: 1.000 kg
Place of Origin Hubei, China
Type Feeler Gauges
Material Stainless Steel
Dimensions (L x W x H) (mm) 30*15*5 cm
Brand Name Linkage
Model Number LJ-SC1
Weight 135g
Blade thickness 0.01,0.02,0.03,0.05,0.07,1.0mm
Packaging and delivery
Packaging Details Carton box
Selling Units: Single item
Single package size: 30X15X5 cm
Single gross weight: 0.500 kg
Place of Origin Hubei, China
Type Rail Cant Measuring Device
Material Aumunium
Dimensions (L x W x H) (mm) 200*90*60mm
Brand Name Linkage
Model JG-SO1
Measure range �±1:10 ~ �±1:200
Power 40mA
Power Supply Mode Built-in lithium battery charging
Size 225*90*60mm
Working temperature -30�°~ +60�°
Packaging and delivery
Packaging Details Aluminum box + pe bag+pe foam+paper carton, 1 unit/carton , carton size: 43*13*25 cm G.W: 3KG
Selling Units: Single item
Single package size: 43X13X25 cm
Single gross weight: 3.000 kg
Place of Origin Hubei, China
Type Rail Laser Alignment Device
Material Alluminium Alloy
Dimensions (L x W x H) (mm) 30*30*12mm
Brand Name Linkage
Laser measure distance 30m
Laser center spot
Rail Straight Edge Ruler
Rail Straight Edge Ruler is used to check track rail from any deflections before and after welding.
Benefits
1. The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology.
2. The cutting line is made of laser cutting process
3. The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear.
4. Material: carbon steel
Specification
Model
LJ-PC-1000
Type
Rail Straight Edge
Material
Carbon steel
Dimensions (L x W x H) (mm)
1000*20*50mm
Measuring range
0-1000mm
Measuring surface accuracy
0.04
Weight
2.6kg
Versine Measuring Device
For easy checking and determination of versines in track track curves .
It can be used for all common rail profiles, Magnet type .
Benefits
Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development.
Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
Specification
Model
ZSH-20
Type
Versine Measuring Device
Material
Aluminum
Dimensions (L x W x H) (mm)
100*20*50mm
Measure range
20M
Weight
157G
Digital Rail Straight Edge
Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear, it includes reference
positioning frame and installed on the framework of reference positioning auxiliary positioning screw and the depth of the rail vertical abrasion, side abrasion measured in feet, its structure is simple, intuitive and accurate measurement data, and upper and lower rapidly, operator safety, its light weight, convenient to carry.
Benefits
Digital Rail Straight Measuring Ruler has the advantages of high measuring accuracy,easy to operate,LCD digital display etc.
Specification
Model
LJ-ZD-I
Type
Digital Straight Edge
Material
Carbon Steel
Dimensions (L x W x H) (mm)
120*12*24 cm
Measurement range
�±5
Indication error
±0.06
Measuring length
1000
Rail Straight Edge Ruler
Rail Straight Edge Ruler is used to check track rail from any deflections before and after welding.
Benefits
1. The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology.
2. The cutting line is made of laser cutting process
3. The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear.
4. Material: carbon steel
Analogue mechanical track gauge
The analogue mechanical track gauge is used for measuring ï¼?
â?¢Track gauge
â?¢Check rail gauge
â?¢Back to back distance
â?¢Superelevation
Features
1.This track gauge is used to measure the railway speed is not greater than 160km/h line.
2. In the measurement process is simple, fast, the workers are easy to accept.
3. lightweight, easy to carry, less buttons, simple operation
PRODUCT SPECIFICATIONS
Model(1435mm)
TGC-W-II 1435
Track gauge(mm)
1410-1470
Check Rail Gauge(mm)
1381-1401
Back to back distance(mm)
1338-1358
Super-elevation range(mm)
-150~+150
Super-elevation resolution(mm)
1
Track gauge resolution(mm)
1
Application rail line
railway speed less than 160km/h
Digital Track Gauge
Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge and back to back distance through microelectronics, embedded and sensor technologies and OLED display screen.
Features
1. Large LED backlit display: especially suitable for day outside and dark night
2. Quick calibration operation: simple measurement process
3. Large capacity battery:long standby time
4. Accurate measurement:keep long-term stability
5. Temperature compensation :working temperature is -30~+55â??
6. Insulated design
7. Anti-electromagnetic interference
8. Waterproof:could use in rainy day
9. power saving function: no operation within 15 minutes, the system will automatically shut down.
10. Approval by CRCC , CE certificate.
Specification
Model(1435mm)
GJC-TJG1
Track gauge(mm)
1384-1470
Gauge rail check gauge(mm)
1364-1450
Guard rail face gauge(mm)
1344-1430
Superelevation measuring range(mm)
-200~+200
Flangeway Clearance(mm)
20-107
Superelevation division value(mm)
0.10
Track gauge division value(mm)
0.1
Track gauge max indication error(mm)
�±0.25
Superelevation error(mm)
±0.45
Application rail line
railway speed less than 250km/h
Rail Straight Edge Ruler
Rail Straight Edge Ruler is used to check track rail from any deflections before and after welding.
Benefits
1. The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology. 2. The cutting line is made of laser cutting process 3. The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear. 4. Material: carbon steel
Model
LJ-PC-1000
Type
Rail Straight Edge
Material
Carbon steel
Dimensions (L x W x H) (mm)
1000*20*50mm
Measuring range
0-1000mm
Measuring surface accuracy
â?¤0.04
Weight
2.6kg
Platform Gauge
Platform gauge is usd for measuring the distance between the railway track center and the platform side and the height between the rail surface and platform plane.(Customizable)
Model
LJ-TC-I
Type
Platform Gauge
Horizontal measure range
1500-2200mm
Height measurement range
200-1300mm or customize
Accuracy
± 1 mm
Digital Switch Rail Lateral Wear Gauge
The Switch Rail Lateral Wear is used to measure the switch rail lateral wear and the descent height value of the switch rail ,this device can be used for all types of switch rail.
BENEFITS
Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracy,easy to operate,high reliability,small volume,light weight etc.
Specification
Model
LJ-JGCM-I
Type
Switch Rail Lateral Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
315*190*200 mm
Vertical wear measure range
92-193mm
Lateral wear measure range
0-120mm
Resolution
0.01mm
Indication error
± 0. 15mm
Digital Switch Rail Lateral Wear Gauge
The Switch Rail Lateral Wear is used to measure the switch rail lateral wear and the descent height value of the switch rail ,this device can be used for all types of switch rail.
BENEFITS
Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracy,easy to operate,high reliability,small volume,light weight etc.
Specification
Model
LJ-JGCM-I
Type
Switch Rail Lateral Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
315*190*200 mm
Vertical wear measure range
92-193mm
Lateral wear measure range
0-120mm
Resolution
0.01mm
Indication error
± 0. 15mm
Digital Rail Corrugation Wear Gauge
Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value.
BENEFITS
Itâ??s simple in operation, compact in size, easy to carry, high precision in measurement, reliable in installation and positioning,simple in use Convenient;Easy to site construction, ensure the quality of work.
Specification
Model
LJ-BM-A
Type
Rail Corrugation Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
120*12*24 cm
Horizontal measure range
1000mm
Vertical measure range
-8 - +25mm
Accuracy
�±0.05mm
Usage
rail corrugation wear gauge for rail measurement
Quality Control:
ISO9001
Resolution
0.01mm
Repeat error
0.02mm
Working temperature
-5 - 40â??
Certificate
CE
Standard
CRCC
50kg fishplate is used for P50 rail to rail joint, each end of rail has three holes, use a pair of fishplate to clamp the rail,
use fishbolts to thread the holes and fix it.
Specification
item
value
Type
Fishplate
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
790/820mm
Place of Origin
China
Hubei
Brand Name
Linkage
Type
Fishplate
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
790/820mm
Place of Origin
China (Mainland)
Model Number
P38/ P43/ P50/ P60
Name
P50 fish plate
Application
P50 rail joint
Standard
YB(T)58-1987
Producing process
Hot rolled
Rail turner Rail turn bar
Turnover device consists of: cast rail turner head, high-quality carbon structural steel rod tip and seamless steel pipe welded
together, utility model turn rail device, turning rail rail with a manual clamp tool.
Easy to use, labor-saving, high efficiency, low labor intensity, easy to carry the railway staff, the railway sector is a
dedicated tool for standing.
Details Images
Rail Turn Bar Railroad Maintenance Tools Solutions
rail turn bar
Rail Turn Bar Railroad Maintenance Tools Solutions
rail turner
PRODUCT SPECIFICATIONS
Type
rail turner
length
1500mm
Applicable rail type
43/50/60 rail
Digital Rail Corrugation Gauge
Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value.
BENEFITS
It's simple in operation, compact in size, easy to carry, high precision in measurement, reliable in installation and positioning, simple in use Convenient;Easy to site construction, ensure the quality of work.
Specification
Model
LJ-BM-A
Type
Rail Corrugation Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
120*12*24 cm
Horizontal measure range
1000mm
Vertical measure range
-8 - +25mm
Accuracy
�±0.05mm
Resolution
0.01mm
Repeat error
0.02mm
Working temperature
-5 - 40
Roller manufactured in special steel and used for moving long-welded rails. The supporting structure is composed of a roller thatruns on two bearings and it is able to support the weight of the rail.
Recommend Products
Frequently bought together
Railway saving back tool for measuring 1000mm 1067mm,1435mm,1520mm ,1600mm ,1676mm track gauge
Rail thermometer
RT rail temperature table is not only dedicated to measure the temperature of the railway rails, but also can measure the air
temperature and the surface temperature of other objects.
division value
1
Measure range
-40~+70
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track.
Benefits
1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm
2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance
3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely.
4.Customizable
5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation
6.Multifunctions
1)Measure the switch angle steel whether is square when installed
2)Measure the internal lock switch parts whether is square when installed
3)Measure the switch rail whether creeping
4) Measure the sleeper whether square when installed.
Product Parameters
Model Size
LJ-FC-I 1760mm
LJ-FC-IA 2000mm
Other customizable
Railway Track Trolley
Light Track Trolley/0.5T-1T loading capacity hand push trolley For transporting material, equipment and tools on rail tracks. â?¢ Light, robust transport trolley with a platform of perforated aluminium plate with an anti-slip surface. â?¢ No accumulation of water or dirt. â?¢ Ball bearing synthetic running wheels/optionally sheet steel jacketed. â?¢ 2 or 4 carrying handles in different positions. â?¢ Parking brake acting on two wheels. â?¢ Foldable type, easy to carry. Various track gauges and designs on request.
Specification
Model
LJ-STC
Type
Rail Trolley
Material
Aluminum alloy
Dimensions (L x W x H) (mm)
930*800*350mm
Track gauge
1435mm
Net weight
Less than 40kg
Operation
Manual
Plate
1700*700mm
Handle height
700mm
Load capacity
1ton
item
value
Type
Fishplate
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
790/820mm
Place of Origin
China
Hubei
Brand Name
Linkage
Type
Fishplate
Material
45# steel, 45Mn
Dimensions (L x W x H) (mm)
790/820mm
Place of Origin
China (Mainland)
Model Number
P38/ P43/ P50/ P60
Name
P50 fish plate
Application
P50 rail joint
Standard
YB(T)58-1987
Producing process
Hot rolled
Rail Clamp
The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair
Detailed Photos
Rail Clamps for Railway Maintenance
Rail Clamps for Railway Maintenance
Rail Clamps for Railway Maintenance
Product Parameters
Model
LJ-JJQT
Type
Rail Clamp
Material
Stainless Steel
Weight
6.5kg
Railway Singal Light
It can be widely used in railroad , shipping and other trafficand transportation industries and some special industriesas signal indication , safety warning and working lighting.
Specification
Model: LJ-JM-LK
Type: Rail Wear Gauge Calibration Block
Material: Stainless Steel
Model: LJ-JM-LK
Application: Rail Wear Gauge
Weight: 2kg
Can customized for different Rail Type
Rail Gap Gauge
Rail Gap Gauge is used for measuring the distance between two adjoining rails
Benefits:
Joint Gap Measuring Device shape: similar to carrot, tapered.
This product is made of stainless steel , long service life. Easy to operate and easy to carry.
Specification
Model: NW-BB
Type: Gap Gauge
Material: Stainless Steel
Dimensions (L x W x H): 35*15*5cm
Measure range: 5-30mm
Material: Stainless steel
MOQ: 50 Pieces
Railway Feeler Gauges and Gap Gauge Ruler Combination
Rail Feeler Gauge is used for inspecting clearance
Rail Gap Gauge Ruler is used for measuring the distance between two adjoining rails
Specification
Model: NW-CC
Type: Railway Inspection Ruler
Material: Stainless Steel
Dimensions (L x W x H): 35*15*5cm
Joint Gap Measuring Device: 5-30 mm
Feeler Gauges: 0.01,0.02,0.03,0.05,0.07,1.0 mm
Steel ruler: -2~17.5 cm
aser Alignment Device
Laser Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device .
Specification
Model: LJ-BXJG
Type: Rail Laser Alignment Device
Material: Alluminium Alloy
Dimensions (L x W x H): 30*30*12mm
Laser measure distance: 30m
Laser center spot:﹤10mm (30m distance area)
Vertical Point range: (-30~+60)mm
Horizontal Point range: (-30~+60)mm
Accuracy: 2mm
Gross weight: 1.5KG
Battery: 2000mAh (continuous using 5-6 hours)
Laser Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device .
Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
Model: ZSH-50
Type: Versine Measuring Device
Material: Plastic
Dimensions (L x W x H): 133*66*26mm
Measuring Range: 50m
Weight: 210kg
Railway Track Square
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track.
Benefits
1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm
2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance
3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely.
4.Customizable
5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation
6.Multifunctions
1ï¼?Measure the switch angle steel whether is square when installed
2ï¼?Measure the internal lock switch parts whether is square when installed
3ï¼?Measure the switch rail whether creeping
4ï¼? Measure the sleeper whether square when installed.
Specification
Model: LJFG-I
Type: Railway Track Square
Material: Aluminum alloy
Size: 1760mm
LG-900 Hydraulic Rail Tensor
This machine can not only be used for repairing the broken rails of the seamless track, but also can be used for the stress relief of the seamless track and the adjustment of the track seam in sections of the ordinary track, and is suitable for various rail types. The use of this product can change the traditional method of repairing broken rails, that is, adopting rewelding without inserting short rails, which saves time and effort, expands the operating rail temperature range, and prevents the actual lock rail temperature from changing.
Specification
Model
LG-900
Type
Hydraulic Rail Tensor
Material
Aluminium
Dimensions (L x W x H) (mm)
1450*780*650 mm
Working Pressure
67 MPa
Max. tensile force
900 kN
Max. compressive force
200 kN
Cylinder stroke
500 mm
Power supply
Petrol engine or electric motor
Locking form
Wedge iron lock
Weight
380 kg
Track jack a device for raising railway track during ballasting or other track operations. Mechanical track jack is the simplest & sturdiest types of the jacks and widely used in Oil Fields, Railway Track Work,Ship Yards, Mining Operation, Construction &Heavy Duty Industrial Maintenance & Establishments.
These Track jacks can be used to lifting both on down and up strocks. They're not only be lowered tooth by tooth but also can be made to tripped off by just moving the trip control.
Specification
Model LJ-QD15
Type Rail Track Jack
Material Stainless Steel
Dimensions (L x W x H) 310*165*520mm
Rated top lifting force 147HN (15T)
Rated hook lifting force 78kN
Lifting stroke â?¥270mm
Initial height 60mm
Weight â?¤25kg
Single-side rail chamfering device is a special tool for eliminating the stress concentration at the sharp corner after rail
drilling operation. It has the advantages of compact structure, simple operation, small size, light weight and convenient carrying etc. It is an indispensable tool in rail drilling works.
Specification
Model LJ-DJQ-D
Type Rail Chamfering Tool
Material Stainless Steel
Dimensions (L x W x H) 180* 50*190mm
Max chamfer diameter �¦ 31~�¦32
Max chamfer cutting torque Tmax = 10N â?¢ m
Max moving forceh of handle rod Fmax = 55N (L = 180)
Working efficiency 1 piece /10 seconds
Overall size 180* 50*190mm
Machine weight 1KG
Railway Crow Bar
It is for situations such as these that the jim-crow comes into its own. The jim crow was slotted over the rail about four or five sleepers away from the offending joint.and the screw tightened until it engaged with the edge of the rail. Then tightened the screw a further half-turn - thus bending the rail slightly.This process was repeated, moving the jim crow one sleeper nearer the joint each time and each time adding one more half-turn. This introduces a gradually increasing curve to the rail as it nears the joint.If you compare these two pictures with those showing the kinks above, you can see the difference. The amount of bend can be tailored to suit each location - and if it turns out that have made the curve too severe, the jim crow can be slotted on the opposite way round and tightened up to ease the curve.
Specification
Type Crowbar Railway
Material Steel
Dimensions (L x W x H) 1500mm, 1800mm
Place of Origin China Hubei
Brand Name Linkage
Item railway crowbar
Brand Name Linkage
Application Wrecking & Demolition, DiggingChiseling
Tip Type Chisel End, Rolled Nail Puller for High Leverage, Heeled Pinch End
Length 1500mm, 1800mm
Weight 6 KG
Rail Clamp
The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair.
Place of Origin Hubei, China
Type Rail Clamp
Material Stainless Steel
Dimensions (L x W x H) (mm) 60X60X60 cm
Brand Name Linkage
Model LJ-JJQT
Weight 6.5kg
Rail Gap Gauge
Rail Gap Gauge is used for measuring the distance between two adjoining rails
Benefits:
Joint Gap Measuring Device shape: similar to carrot, tapered.
This product is made of stainless steel , long service life. Easy to operate and easy to carry.
Place of Origin Hubei, China
Type railway tools
Material Stainless Steel
Brand Name Linkage
Type: Rail Gap Gauge
Product name: Railway Joint Gap Measuring Device
Application Railway Joint Gap
Usage: For Railway Track Joint Clearance measurment
Color: Silver
Approved: ISO
Certificate CE
Warranty: 1 year
Standard: CRCC
Customized: yes
Place of Origin Hubei, China
Type railway tools
Material Aluminum alloy
Dimensions (L x W x H) (mm) 184*50*28cm
Brand Name Linkage
Type: Rail Track square ruler
Product name: Railway Track Square Ruler
MOQ 2PCS
Size: 1760mm
Color: customized
Approved: ISO
Certificate CE
Warranty: 1 year
Standard: CRCC
Customized: yes
Railway Track Square
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track.
Benefits
1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm
2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance
3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely.
4.Customizable
5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions
1)Measure the switch angle steel whether is square when installed
2)Measure the internal lock switch parts whether is square when installed
3)Measure the switch rail whether creeping
4) Measure the sleeper whether square when installed.
Rail turner Rail turn bar
Turnover device consists of: cast rail turner head, high-quality carbon structural steel rod tip and seamless steel pipe welded together, utility model turn rail device, turning rail rail with a manual clamp tool.
Easy to use, labor-saving, high efficiency, low labor intensity, easy to carry the railway staff, the railway sector is a dedicated tool for standing.
Place of Origin Hubei, China
Type railway tools
Material Aluminum alloy
Dimensions (L x W x H) (mm) 1800*30*120mm
Brand Name Linkage
Type: Rail turn bar
length 1500mm
Applicable rail type: 43/50/60 rail
Color: customized
Approved: ISO
Certificate CE
Warranty: 1 year
Standard: CRCC
Customized: yes
Rail Clamp
The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque.
· Allows suction jars to be attached to stand rail
· One rail clamp holds one canister
· Rail can hold up to four rail clamps and canisters
Specification
Model LJ-JJQ-C
Type Rail Clamps
Material Stainless Steel
Dimensions (L x W x H) 335mm*175mm*42mm
Application Rail Type 43,50,60kg
Crane rail clip is a welded and adjustable crane rail clip assembly which is designed to fix to heavy rails in the most arduous applications. Its material is forged Q235 or Q345 steel. Each clip has one sets of M16 high strength bolts (8.8 grade). It is designed to withstand a 120 KN (12.2 tonnes) horizontal force from the rail, and the horizontal adjustment is 20 mm.
Place of Origin Hubei, China
Type Weldable Crane Rail Clip
Material Stainless Steel
Brand Name Linkage
Type: welded
Keyword: Crane Rail Clip
Usage: Fastening Railway
Weight 0.8KGS
OEM/ODM: Customization Service Provided
Brand name Linkage
Material Q235 or Q345 steel
This rerailer tool is specially developed to solve the problem of double track of train and mine car. Use left and right in pairs. Scope of application: running in the mine ground underground line of the car, due to overspeed, collision, line quality and other reasons, often derailment off track phenomenon, to production, safety has a great impact. Suitable for 24kg/m rail left and right in pairs.
Place of Origin Hubei, China
Type railway tools
Material Aluminum alloy
Dimensions (L x W x H) (mm) 300*300*150mm
Brand Name Linkage
Type: rerailer
Applicable rail type: 43/50/60 rail
Usage: Railway maintenance work
Color: customized
Approved: ISO
Certificate CE
Warranty: 1 year
Standard: CRCC
Customized: yes
Place of Origin Hubei, China
Type railway tools
Material steel, Alloy Steel
Dimensions (L x W x H) (mm) 220*190*140mm
Brand Name Linkage
Type: rail fork
Product Name: four teeth railway fork
Usage: railway tool
Color: customized
Application: Rail fork track work
Approved: ISO
Certificate CE
Warranty: 1 year
Standard: CRCC
Customized: yes
rail steel fork
In the process of transporting and crushing mineral resources, steel forks are needed. In the process of railway line construction
and maintenance, steel forks are used to shovel stones. There is no tool that can replace steel forks. If steel forks are used
improperly, they will often cause damage to the tools, such as broken teeth or broken handles. During use, you should try to put the steel fork against the ground and insert it into the object to be removed. One is to reduce
resistance, and the other is to prevent the steel fork from being overly worn. The handle can be replaced if the handle is broken.
If the tooth of the steel fork is broken, then The steel fork is scrapped! The product is made of X-quality rail steel as the raw material, forged as a whole, and quenched, with stable quality! It is widely used in railway maintenance and construction projects, and all railway public works departments and related distributors are welcome to purchase.
Railway Track Square
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Features 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1Measure the switch angle steel whether is square when installed 2Measure the internal lock switch parts whether is square when installed 3Measure the switch rail whether creeping 4 Measure the sleeper whether square when installed.
PRODUCT SPECIFICATIONS
Model
LJFG-I
Type
Railway Track Square
Material
Aluminum alloy
Size
1760mm
Warranty
1 Year
Rail Straight Edge Ruler
Rail Straight Edge Ruler is used to check track rail from any deflections before and after welding.
Benefits
1. The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology. 2. The cutting line is made of laser cutting process 3. The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear. 4. Material: carbon steel
Model
LJ-PC-1000
Type
Rail Straight Edge
Material
Carbon steel
Dimensions (L x W x H) (mm)
1000*20*50mm
Measuring range
0-1000mm
Measuring surface accuracy
0.04
Weight
2.6kg
Elastic Rail Clip
Factory Supply Railroad Accessories Track Elastic Crane Rail Clip Introduction Railway parts is the root causes of vibration,supplier of china ,railway clip in order to overcome the vibration source, reduce the occurrence of rail joint diseases,use of railway fasteners is the best choice. increases the joint resistance.ensure that the railway transport safety. Therefore,the construction of the railway cargo rail transit from railway fasteners "support". The structure is compact, buckle pressure big, keep track ability, less workload maintenance , especially suitable for the large mechanical work line.our mainly export railway spring clips type.
Model
SKL 1 Rail Clip
Type
Railway Clips
Material
Stainless Steel
Dimensions (L x W x H) (mm)
20*10*15 cm
Spec.
13
Hardness
42-47HRC
Elastic Rail Clip
Factory Supply Railroad Accessories Track Elastic Crane Rail Clip Introduction Railway parts is the root causes of vibration,supplier of china ,railway clip in order to overcome the vibration source, reduce the occurrence of rail joint diseases,use of railway fasteners is the best choice. increases the joint resistance.ensure that the railway transport safety. Therefore,the construction of the railway cargo rail transit from railway fasteners "support". The structure is compact, buckle pressure big, keep track ability, less workload maintenance , especially suitable for the large mechanical work line.our mainly export railway spring clips type.
Rail Track Clips for Railway Fastener
Specification
Model
SKL 1 Rail Clip
Type
Railway Clips
Material
Stainless Steel
Dimensions (L x W x H) (mm)
20*10*15 cm
Spec.
�¸13
Hardness
42-47HRC
CTS -1002 Handy Ultrasonic Flaw Detector
The CTS -1002 is a light-weightinstrument with excellenterformance which accumulates theexperiences of 50 years for makingultrasonic instruments . Thisinstrument is EN12668-1 : 2010compliance and has anindustrial-leveled TFT display with full WVGA ( 800X480 resolution providing superior visibility in alllighting conditions including direct sunshine.
Place of Origin Hubei, China
Type Ultrasonic Flaw Detector
Dimensions (L x W x H) (mm) 215mm*126mm*53mm
Brand Name Linkage
Packaging and delivery
Packaging Details Carton box
Selling Units: Single item
Single package size: 28X20X15 cm
Single gross weight: 3.000 kg
Hydraulic Rail Puller Rail Tensor,it's suitable for rail 50kg/m,60kg/m and 75kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. By locking the rail waist, it will not hurt the rail head surface, one machine with a variety of configuration meets the field work in different ways, it possesses features of unique design, light weight, simple & convenient manipulation and powerful rail pulling force. The machine can not only be used for repairing the broken rails of seamless tracks, but also can be used for stress relief of seamless tracks and section adjustment of track seams in common tracks, and is suitable for various rail types. Using this product can change the traditional method of repairing broken rails, that is, re-welding in situ without inserting short rails, saving time , Save labor, expand the operating rail temperature range, and prevent the actual lock rail temperature from changing.
Railroad Track Tools LG-900 Hydraulic Rail Tensor
Product Parameters
Model
LG-900
Type
Hydraulic rail tensor
Working Pressure
67 MPa
Max. tensile force
900 kN
Cylinder stroke
500 mm
Locking form
Wedge iron lock
Product Description
Railway switch rail for railway measurement & maintenance
The switch rail lateral wear gauge is used to measure the switch rail lateral wear and descent height value of the switch rail, it can be used for all the type of switch rail. BENEFITS Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracy, easy to operate,high reliability,small volume,light weight etc.
Specification
Material alumunium
Dimensions (L x W x H) (mm) 800*20*50mm
Place of Origin China
Brand Name Linkage
Product name Digital switch rail wear gauge
Model LJ-JGCM-I
Vertical wear measure range 92-193mm
Lateral wear measure range 0-120mm
Resolution 0.01mm
Indication error -0.15~0.15mm
Quality Control iso Standard crcc
Warranty 1YEAR
Certificate CE
Package & Delivery
Aluminum box + pe bag+pe foam+paper carton, 1 units/carton , carton size:36*25*12mm G.W: 4KG
Company Profile
Wuhan Linkage track Co., Ltd. established in 2022, we are a rapidly growing company involved in the design and manufacture of an extensive range of equipment for the railway industry.
We started our business from producing railway measurement device in 2003 and wide our product range to small rail machines like rail cutting machine ,rail grinding etc .
Our company has expanded its operation to include three branch office , location facilitates in Xiangyang ,Wuhan and Guangzhou China.
Now, Linkage family of brands provides a diverse and comprehensive product line for different markets and demands.
Our products are sold in more than 50 countries and regions worldwide. Market acceptance is backed by ISO9001, European CE certification .
As a Chinese mainland based company, we like to take our advantage of low cost and strive to offer you quality products with most competitive pricing with integrity.
Versine Measuring Device
For easy checking and determination of versines in track track curves .
It can be used for all common rail profiles, Magnet type .
Benefits
Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development.
Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate.
Specification
Model: ZSH-20
Type: Versine Measuring Device
Material: Aluminum
Dimensions (L x W x H): 100*20*50mm
Measure range: 20M
Weight: 157G
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks.
Specification
item NLB-500
Type Rail Impact Wrench
Material Stainless Steel
Dimensions (L x W x H) 830*280*380 mm
Engine 2 stroke, Single cylinder, Air cooling
RPM 7500r/min
Power 1.42kw
Spindle RPM 800r/min
Rated torque 500N.m
Peak torque 1000N.m
Weight 18kg
NLB-1800 Rail Bolt Wrench
The NLB-1800 Rail bolt wrench is novel in design, compact in structure, small in volume, light in weight, strong in
maneuverability, two-stage shock absorption of handle, portable in hand, convenient in getting on and off the track, especially suitable for the regional maintenance operation of track bed where turnout, tunnel, bridge and culvert and other large and medium-sized railway maintenance machinery cannot work.
Specification
Model NLB-1800
Type Rail Bolt Wrench
Material Stainless Steel
Dimensions (L x W x H) 830*280*380mm
Petrol engine Two stroke petrol engine
Rated Revolution 12000r / min
Rated power 3.6kw
Spindle speed 1130R / min
Torque â?¥ 1800n. M
Lithium battery Rail impact wrench machine
Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements.
Model Battery Rail power wrench LJ-LD81901
Rated voltage (DCV) 18-36
Max. torque 3000 N.m
motor speed (RPM) 0-3000 optional
impact frequency (BPM) 0-5000 optional
battery pack capacity (ah) 18-36
operating temperature range (-40 ~ 50 )
torque control adjustable and controllable
Lithium battery Rail impact wrench machine
Double lithium traveling cantilever power wrench (model: LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations
Model Battery Rail power wrench LJ-LD81901
Rated voltage (DCV) 24-48
Max. torque 3000 N.m
motor speed (RPM) 0-3000 optional
impact frequency (BPM) 0-5000 optional
battery pack capacity (ah) 24-48
operating temperature range (-40 ~ 50 )
operating range m6-m30
torque control adjustable and controllable
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency.
Specification
Model NLB-300
Type Rail Impact Wrench
Material Stainless Steel
Dimensions (L x W x H) 1300*510*760mm
Main shaft rpm 780r/min
Max. loosen torque â?¥300 Nâ?¢m
Max. fasten torque â?¥150 Nâ?¢m
Working efficiency â?¤10 pieces/min
Petrol engine
1) Model: GX160
(2) Rated power: 4Kw
(3) RPM: 3600r/min
Weight 60kg
Double Side Rail Hole Chamfering Kit
The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering
device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long.
Specification
Model LJ-DJQ-S
Type Rail Chamfering Tool
Material Stainless Steel
Dimensions (L x W x H) 40*15 cm
Chamfer Diameter 31-?32
Chamfering Size 145°, 2.5 45°
Application 43kg/m,50kg/m,60kg/m rail
Weight 2.8KG
Double Side Rail Hole Chamfering Kit
The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering
device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long.
Specification
Model LJ-DJQ-S
Type Rail Chamfering Tool
Material Stainless Steel
Dimensions (L x W x H) 40*15 cm
Chamfer Diameter �?31-�?32
Chamfering Size 1�?45�°, 2.5�?45�°
Application 43kg/m,50kg/m,60kg/m rail
Weight 2.8KG
Place of Origin Hubei, China
Type Other
Material alumunium
Dimensions (L x W x H) (mm) 300*300*150mm
Brand Name Linkage
Product name rail stopper
Usage rail stopper
Application rail stopper
Standard crcc
Quality Control iso
Certificate CE
Warranty 1YEAR
Customize yes
rail shoe buffer
Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large
masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry
determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent
stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going
past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches.
The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles
themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until
it stops.
Place of Origin Hubei, China
Type L Square Ruler
Material Stainless Steel
Dimensions (L x W x H) (mm) 300*130mm
Brand Name Linkage
Model LJ-ZJC
Scale 1mm
Length 300 mm
Model
Battery Rail power wrench LJ-LD81901
Rated voltage
(DCV) 24-48
Max. torque
3000 N.m
motor speed (RPM)
0-3000 optional
impact frequency (BPM)
0-5000 optional
battery pack capacity
(ah) 24-48
operating temperature range
(-40 ~ 50 â??)
operating range
m6-m30
torque control
adjustable and controllable
The NLB-1800 Rail bolt wrench is novel in design, compact in structure, small in volume, light in weight, strong in
maneuverability, two-stage shock absorption of handle, portable in hand, convenient in getting on and off the track, especially suitable for the regional maintenance operation of track bed where turnout, tunnel, bridge and culvert and other large and medium-sized railway maintenance machinery cannot work.
Specification
Model
NLB-1800
Type
Rail Bolt Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
830*280*380mm
Petrol engine
Two stroke petrol engine
Rated Revolution
12000r / min
Rated power
3.6kw
Spindle speed
1130R / min
Torque
1800n. M
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks.
Specification
item
NLB-500
Type
Rail Impact Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
830*280*380 mm
Engine
2 stroke, Single cylinder, Air cooling
RPM
7500r/min
Power
1.42kw
Spindle RPM
800r/min
Rated torque
500N.m
Peak torque
1000N.m
Weight
18kg
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency.
Specification
Model NLB-300
Type Rail Impact Wrench
Material Stainless Steel
Dimensions (L x W x H) (mm)1300*510*760mm
Main shaft rpm 780r/min
Max. loosen torque 300 Nm
Max. fasten torque 150 Nm
Working efficiency 10 pieces/min
Petrol engine
1) Model: GX160
(2) Rated power: 4Kw
(3) RPM: 3600r/min
Weight 60kg
NLB - 600 type internal combustion bolt wrench is suitable for railway line sleeper bolt and nut of
unscrew and fastening operation. This machine is double sleeve and homework, reverse torque
large in 600 n m., can unscrew various corrosion bolt, the working efficiency is high. At the same
time change impact torque for static torque, make the operation of rail fastener pressure error is
small; Reversing agile, centralized control, convenient operation, it is a lot of multifarious pine,
bolt operation indispensable necessary equipment.
Parameter
Parameter Of NLB-600 railway maintenance rail bolt wrench with petrol engine
model
NLB-600
the gasoline engine type
engine
the gasoline engine power rating
4.5KW
the engine speed
3600 r/min
sleeve quantity
2
sleeve center distance
214 + 0.5 mm
tightening torque adjustable
80-170 (N, m)
maximum unscrew torque
> 600 n, m
factory tightening torque
125 N, m
work efficiency
LB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency.
Specification
Model
NLB-300
Type
Rail Impact Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1300*510*760mm
Main shaft rpm
780r/min
Max. loosen torque
â?¥300 Nâ?¢m
Max. fasten torque
â?¥150 Nâ?¢m
Working efficiency
â?¤10 pieces/min
Petrol engine
1) Model: GX160
(2) Rated power: 4Kw
(3) RPM: 3600r/min
Weight
60kg
Digital Rail Thermometer
The digital display rail thermometer adopts PT100 linear temperature sensing, the probe adopts copper embedded integrated technology, has the function of waterproof and pressure-proof and earthquake-proof, and the product is designed with a railway track digital display thermometer.
BENEFITS
Digital Rail Thermometer has the advantages of portable, high measuring accuracy, easy to operate, LCD digital display.
Specification
Model
JGGW-1
Type
Rail Thermometer
Material
Aluminium alloy, plastic + copper
Dimensions (L x W x H) (mm)
10*8*3cm
Temperature range
-60 ~ +100
Size
108*72*25cm
Maximum permissible
±1
Power
0.12W
Weight
90g
Place of Origin Hubei, China
Type Versine Measuring Device
Material Plastic
Dimensions (L x W x H) (mm) 133*66*26mm
Brand Name Linkage
Measuring Range 50m
Weight 210kg
Packaging and delivery
Packaging Details Pe bag+pe foam+paper carton, carton size: 20*10*8mm
Port Shenzhen
Supply Ability
Supply Ability 5000 Unit/Units per Month
Digital Rail thermometer
The digital display rail thermometer adopts PT100 linear temperature sensing, the probe adopts copper embedded integrated
technology, has the function of waterproof and pressure-proof and earthquake-proof, and the product is designed with a railway
track digital display thermometer with power prompt and power shortage alarm function
Model
JGGW-I
Measure range
-60â??â??+100â??
Reading value
0.1â??
Power
battery
Weight
0.1kg
Inspection Testing Hammer
Non sparking tools are widely used in petroleum industry , chemical industry , power generation, railroad, mining, etc.
Specification
Model
LJ-JCC
Type
Inspection Testing Hammer
Dimensions (L x W x H) (mm)
490*125mm
Handle
Wood
Length
50CM
Railway Crow Bar
It is for situations such as these that the jim-crow comes into its own. The jim crow was slotted over the rail about four or five sleepers away from the offending joint.and the screw tightened until it engaged with the edge of the rail. Then tightened the screw a further half-turn - thus bending the rail slightly.This process was repeated, moving the jim crow one sleeper nearer the joint each time and each time adding one more half-turn. This introduces a gradually increasing curve to the rail as it nears the joint.If you compare these two pictures with those showing the kinks above, you can see the difference. The amount of bend can be tailored to suit each location - and if it turns out that have made the curve too severe, the jim crow can be slotted on the opposite way round and tightened up to ease the curve.
Heavy Duty Crowbar Railway /Rail Craw Bar Rail Maintenance Tools
Heavy Duty Crowbar Railway /Rail Craw Bar Rail Maintenance Tools
Product Parameters
item
value
Type
Crowbar Railway
Material
Steel
Dimensions (L x W x H) (mm)
1500mm, 1800mm
Place of Origin
China
Hubei
Brand Name
Linkage
Item
railway crowbar
Brand Name
Linkage
Application
Wrecking & Demolition, DiggingChiseling
Tip Type
Chisel End, Rolled Nail Puller for High Leverage, Heeled Pinch End
Length
1500mm, 1800mm
Weight
6 KG
NQG 5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m 75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
Type Rail Cutting Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 670*600*510mm
Brand Name Linkage
Internal combustion engine HONDA GX200
Engine Power 4.8kW
Engine Speed 3600r / min
Thin grinding wheel (spindle) Spindle speed 3030r / min
Specification (linear velocity) 400 * 32 * 4 (â?¥70m /s)
Cutting time 60kg / m rail, â?¤120S
Number of usage 50kg /m rail, use â?¥ 4 times
Number of usage 2 60kg /m rail, use â?¥ 3 times
Machine weight 39.5kg
Rail Cant Measurement Device The main part of the wheel tread is an inward inclination of 140 In order to make the top of the rail track under the wheel load with cone tread stressed uniformly decrease load offset reduce rail web stress avoid slit between rail head and rail web the railway track shall not be laid upright for straight line it shall be inward inclined this inward inclination of rail called Rail Cant it is a high precision portable numeric rail geometrical testing tool
Benefits
1Stable performance protect electromagnetic interference
2One piece structure design light and handy
3magnetic selfabsorption function
4Data display is clear and intuitive
5The function of temperature of environmental temperature factors on the measurement data
6Power saving function The system will shutdown automatically if there is no operation in 5 minutes
Specification
Model JGSO1
Type Rail Cant Measuring Device
Material Aumunium
Dimensions L x W x H 2009060mm
Measure range 110 1200
Power 40mA
Power Supply Mode Builtin lithium battery charging
Size 2259060mm
Working temperature 30 60
Digital Rail Offset Ruler
This digital railway offset ruler is special equipment which is used for railway turnout offset distance and frame size
Measuring the distance between the working edge of straight stock rail and the closure rail working edge
BENEFITS
1 Durable Adopt the high strength material not easy to wear out
2 High Accuracy Reach 005mm
3 Stable insulation performance
The ruler body is equipped with insulating board which is made of epoxy glass fiber board FR4 It has high mechanical strength performance under the temperature of 40 120 The size of the mechanical ruler is stable and never degenerates and the electrical insulation performance is stable in high humidity environment
4 Accept customized
5 Digital displayeasy to read
6 Multifunctions with wide usagecould be used for measuring two kinds projectssuitable for different demands
1Measure the offset distance for the standard track gauge turnout
2Could be used as track square ruler for measuring the right alignment of rail tracks
7 High hardness Measure Heads Made of Rockwell 52 steel high hardness and not easy to rust
Specification
Model
LJSZJCI
Type
Digital Rail Offset Scale Ruler
Material Aluminum alloy
Dimensions L x W x H 17103540cm
Type Digital
Measuring Rang 1001400mm or Customization
Indication Error 04mm
Accuracy 005mm
Insulation Resistance 1M
Rail Thermit Welding
Thermite welding is a track connection construction process with mature technology, simple, convenient, fast, and high-quality construction.Rail thermite welding is the thermite flux composed of aluminum powder, iron oxide and other metal additives in a special crucible, and a high temperature match is used to ignite the thermite reaction. During the reaction, a large amount of heat is released and the molten alloy mixture reacts to form.Because of its high density, molten steel sinks below, the slag generated by the reaction is relatively light and floats on the upper part, and the molten steel is filled with sand in a short time.At the same time, the aluminum hot molten steel itself acts as a filler metal, crystallizes and cools together with the molten steel rail, and the two steel rails form a whole.
