E3 motor controller is packed with a powerful combination of hardware, firmware and software that will push performance to a new level.
a. 400A continuous current, 12S LiPo cells, 54V power system is one of the most powerful motor controllers. Sensored or sensorless are available and support 24,000 RPM max.
b. BEC output. BEC voltage is optional and adjustable, 6v/7.4v/8.4v according to conditions.
c. The smart control cooling fan is powered by BEC. When temperature exceeds 55 degree, the power supply to fan will be turned on. If the temperature is under 55 degree, the power to fan will be reduced and cut off in several seconds. Also if there is a abnormal large current, the power will be shut down too.
d. The forged fin heatsink allows the airflow throughout the system, cooling critical components down and keeping motor controller working at its best.
e. The key parameters are configurable. You can tune the parameters according to your handling or driving habit on a app. This can be achieved on app through Bluetooth connection. Access configurable parameters such as running mode, Lipo cells, cutoff voltage, brake force, acceleration rate and turbo timing etc. it will optimize your experience for any driving conditions, from rugged terrain to pavement in racing or parenting activities.
Xiongcai E3 motor control provides extreme performance for 1:8 or 1:6 scale R/C model car and truck. Xiongcai Technology, a pioneering company in specialized field of motor control that you can trust.
Xiongcai Water Pump Motor Speed Controller Approved By China's Largest Water Pump Manufacturer In China
1. Voltage DC16~36V
2. Rated Currentï¼?10A
3. Working Tempï¼?-40ï½?85â??
4. Working Humidityï¼?95%
5. Size: 87*84*15mm
6. Protectionï¼?under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit
7. PWM speed regulation
Xiongcai Technology is one of the few manufacturers providing clients with solutions and finished products. We engineer, analyze, test and supply finished products.
You will see most of manufacturers provide OEM service only, they don�¢??t care about the handling, performance, even appearance, but we care all these. We take them seriously just as we value our own eyes.
Five years ago, Unicent Automotive Tech, a company focused in automotive thermal management, contacted us and inquired about motor controller for automotive water pump. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed budget.
Our R&D team evaluated the list and decided to challenge the advancement works. The R&D team designed a combination of software and hardware meticulously called XCC107. In the next several months, they repeated the designing, testing, modifying, trying to have all parameters meet customer�¢??s requirements. Four months later, they achieved it. After one year test and verification in vehicle testing, Xiongcai XCC107 motor controller for water pump was approved. The product has been introducing to Unicent for 4 years till now.
Xiongcai XCC107 motor controller for water pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit, this means the motor controller may stop working due to some reason but never be damaged.
We are one of the few engineering companies providing a full service from design to supply.
Xiongcai is serving top clients in auto industries, such as NISSAN, XPeng, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto (FLACC), Keshen, Unicent and more.
Contact us for detail.
Xiongcai Motor Controller Applied In Cummins Engine
1. Voltage DC16~36V
2. Rated Current 10A
3. Working Tempï¼?-40ï½?85â??
4. Working Humidityï¼?95%
5. Size: 87*84*15mm
6. Protectionï¼?under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit
7. PWM speed regulation
Since 2011, Xiongcai Technology has been a pioneering company in specialized field of motor controller for automotive Fuel Pump.
Founded by experienced engineer, Xiongcai tends to be at the leading edge of technological development of motor controller for automotive fuel pump.
In 2018, Joinhands Auto Parts, a company specialized in design and manufacture of automotive fuel pump, contacted us and inquired about motor controller for their products. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry because this product is designed for Wuhan Cummins, one of greatest engine manufacturers in China. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed budget.
Xiongcai team evaluated the requirements and decided to have a try. Engineered from ground up, Xiongcai R&D team designed a combination of software and hardware meticulously called XCA105, making all parameters up to customer�¢??s standard. After one year test and verification, Xiongcai XCA105 motor controller for fuel pump was approved. The client has introduced this product for 6 years till now.
Xiongcai XCA105 motor controller for fuel pump with 8A current, DC8-18v power system, working humidity 95% max, providing protection including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit protection. And this product certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. XCA105 motor controller is a trusted product and Xiongcai is a trusted partner.
We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products.
Xiongcai is partnering with top clients in auto industries, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more.
Xiongcai Motor Controller Approved By The Largest Auto Group In China
1. Voltageï¼?DC16~36V
2. Rated Currentï¼?10A
3. Working Tempï¼?-40ï½?85â??
4. Working Humidityï¼?95%
5. Size: 87*84*15mm
6. Protectionï¼?under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit
7. PWM speed regulation
Since 2011, Xiongcai Technology has been a pioneering company in specialized field of motor controller for automotive Fuel Pump.
Founded by experienced engineer, XIONGCAI TECH is one of the few manufacturers that focus on motor controller (electronic speed control or ESC), especially in automotive fuel pump.
We launched a motor controller XCA105 which was engineered for automotive fuel pump.
In 2016, Keshen Auto Parts, a company specialized in design and manufacture of automotive fuel pump, contacted us and inquired about motor controller for their products. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry because this product is designed for the greatest automobile group in China�¢??FAW. They said they had met several suppliers and discussed the requirements, some items on the list were really hard to achieve at the same time, because if all items met this extremely high standard, the cost would exceed cost budget.
Our RD team evaluated the list and decided to take this project. R&D team designed a combination of software and hardware meticulously called XCA105, making all parameters up to customer�¢??s standard. After one year test and verification, Xiongcai XCA105 motor controller for fuel pump was approved. The client has introduced this product for 6 years till now.
Xiongcai XCA105 motor controller for automotive fuel pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit protection, this means the motor controller may stop working due to some reason but never be damaged.
We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products.
The company is serving top clients in auto industries, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more.
Contact us Shenzhen Xiongcai Technology Co., Ltd for detail. We try to assist you in achieving your idea.
Xiongcai Motor Controller Has Been Introduced By The Largest Auto Fuel Pump Manufacturer
1. Voltage DC16~36V
2. Rated Current 10A
3. Working Temp -40 85
4. Working Humidity 95%
5. Size: 87*84*15mm
6. Protection under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit
7. PWM speed regulation
Xiongcai Technology tends to be at the leading edge of technological development of motor controller for automotive Fuel Pump.
XIONGCAI TECH is one of the few manufacturers that focus on motor controller (electronic speed control or ESC) only, especially for automotive fuel pump.
In 2017, ACHR Electrical Machinery, a company specialized in design and manufacture of automotive fuel pump. They contacted us and inquired about motor controller for their products. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry because this product is designed for the greatest automobile engine group in China�¢??FAWDE. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed cost budget.
Xiongcai team wanted to give a shot. Xiongcai R&D team designed a combination of software and hardware meticulously called XCA105, making all parameters up to customer�¢??s standard. After one year test and verification, Xiongcai XCA105 motor controller for fuel pump was approved. The client has introduced this product for 6 years till now.
Xiongcai RD team designed perfect protection measures to protect the motor.
a. Peak current limit. This measure will limit the peak current to avoid damage to motor;
b. Single PWM periodical current detection limit reduces impact of pulse current to motor;
c. Waterproof is designed for all weather condition, up to IP67. The ESC is potted in epoxy to protect the electronics and improve heat transfer, enabling motor controller working in any condition at a lower temperature;
And more protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit protection. Furthermore, XCA105 motor controller was certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637.
We are one of the few engineering companies providing a full service from design to supply of product, including design, analyze, test and supply finished products.
Xiongcai is serving top clients in auto industries, ACHR, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more.
Contact us Shenzhen Xiongcai Technology Co., Ltd for detail. We try to assist you in achieving your idea.
Xiongcai XC302 electronic speed controller (ESC) is engineered for medical pedal tool use.
Xiongcai Tech has been specializing the electronic speed controller design and manufacture for 15 years, and committed to promoting performance of your devices.
The Xiongcai XC302 electronic speed controller (ESC, motor controller) is packed with a potent combination of hardware and software advancements, engineered for MECIAL DEVICES SUCH AS BONE DRILL, GRINDER, PEDAL TYPES.
This product is supplied in forged Al case, what you need to do is inserting it into the housing. But you still need to pay attention to the installation dimension and the sensoring range. With power system of 30A current, 7.2-16.8V, this electronic speed controller will push performance of your tool to a new level.
a) this product can be inserted into handle and fixed with our any loose;
b) The magnets fixed on the trigger align with Hall Sensors;
c) The max range between magnets and Hall sensors is greater than 5.5mm(for cutting off the magnetic fiel and stopping completely) and the minimum range is zero(for maximizing the performance of bone drill).
This product is highly reliable and certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. And we design many protection measures include under voltage, over voltage, over current, over temperature, blocking, short circuit protection, etc, making sure product working at its best.
You can tune the parameters of ESC for different condition, Xiongcai XC302 ESC will promote the performance to a new level.
Xiongcai Tech has been specializing the electronic speed controller design and manufacture for 15 years, and committed to promote performance of your devices to a new level.
Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals.
Contact us and have a try.
Xiongcai XC301 electronic speed controller (ESC) with 30A, 16.8V Power System for medical devices
The Xiongcai XC301 electronic speed controller (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER.
30A continuous current, 7.2-16.8V, the power system will push your devices to their limit and beyond, powerful and reliable.
This product is ready to use if you can make sure the following items complying to your tool spec.
a) this product can be inserted into handle and fixed with our any loose;
b) The magnets fixed on the trigger align with Hall Sensors;
c) The max range between magnets and Hall sensors is greater than 5.5mm(for cutting off the magnetic fiel and stopping completely) and the minimum range is zero(for maximizing the performance of bone drill).
Xiongcai Tech has been specializing the ESC design and manufacture for 15 years, and parts are certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. You donâ??t need to worry about the quality and reliability. We designed a series of protection measures to make sure that the products can run steadily and safe. Protection measures includes under voltage, over voltage, over current, over temperature, blocking, short circuit protection, etc.
Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals.
Contact us and have a try, we are ready to put your device in its best.
Xiongcai XC303 electronic speed controller (ESC) is engineered for medical bone drill speed control, also it is suitable for Stryker bone drill.
The Xiongcai XC303 electronic speed control (ESC, motor controller) is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER.
With power system of 30A, 7.2v-16.8v, this product will promote performance of your vehicle. Integrating an Al case, it can be inserted into handle of bone drill, what you need to do is ensuring the following items complying with our specification:
a) this product can be inserted into handle and fixed with our any loose;
b) The magnets fixed on the trigger align with Hall Sensors;
c) The max range between magnets and Hall sensors is greater than 5.5mm(for cutting off the magnetic fiel and stopping completely) and the minimum range is zero(for maximizing the performance of bone drill).
A Brazil client contacted us and inquired about electronic speed comtroller several months ago. He said he wanted to buy controller for Skryker#6,#7,#8. He saw a lot of damaged Stryker bone brill being abandoned because no contollers for maintenance. He doubted and said we bought some electronic speed controller from other suppliers, but some of them could not be installed properly and some of them could not run at their best.
I showed him the specification and told him to pay attention to the items I mentioned above. After checking the details, he understood why the products he bought before didn't work well, because the range of magnets was not precise, the magnetic field was unsteady. I told him samples are charged, but expense could be refunded when he placed order for massive production. He bought 10 samples for test. One month later, he came back to me and said the test was successful, Stryker bone drill worked very well as orginial. Last week, he ordered a batch of electronic speed controller for his maintenance business.
We designed a series of protection measures to make sure that the products can run steadily and safe. Protection measures includes under voltage, over voltage, over current, short circuit protection, etc. Furthermore, this product is certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. You donâ??t need to worry about the reliability.
Xiongcai electronic speed controllers have been applied to many top brands such as NISSAN, XPeng, Jingyi Group, ACHR, FAW Group, FAWDE, Shenhai Electrical Appliances, Kesen, Cummins and more.
If you have any special requirements on your motor control, we will help you achieve your ideals.
Contact us and have a try, or google Shenzhen Xiongcai Technology, we are ready to put your device at its best.
Xiongcai XC303 Motor Controller Applying To Strker #6, #7, #8 Bone Drill
Xiongcai Technology has been specializing in motor control since 2011, with a decadeâ??s experience, our products are suitable for many medical equipment, especially applying to bone drills, draw saws.
In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire motor controller.
He said he ran maintenance business on Stryker bone drills, especially the Stryker6/7/8. Actually we do have some types of motor control for bone drill application, providing equivalent performance.
The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all.
We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not match precisely. The distance of triggers are not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best.
We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 motor controller, which met devices precisely.
The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best.
Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering excellent products to customers.
Contact us and have a try, we will assist you with efficient motor control.
Xiongcai XC303 Motor Controller Provides Equivalent Performance to Stryker's Products
Xiongcai has been focusing on motor controller for automotive fuel/water pump, RC car and medical devices since 2011, and focusing on motor controller only. We provide expertise and solution.
In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire about motor controller and find replacements to Stryker6/7/8 for his maintenance business on Stryker bone drills, especially the Stryker6/7/8, a lot of damaged bone drill were abandoned due to lack of replacement motor control, because he could find a ssupplier providing replacements. Actually we do have some types of motor control for bone drill application, providing equivalent performance.
The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all.
We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not match precisely. The distance of triggers is not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best.
We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 motor controller, which matched devices precisely. it's not sophisticated, but it needs profession, not only technology, but also service.
The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible and professional. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best.
Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering excellent products to customers.
Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto (FLACC), Kesen, Unicent and more.
Contact us and have a try, or google Shenzhen Xiongcai Technology, we will deliver efficient solution to you according to your ideas.
Xiongcai XC303 motor control (ESC) is engineered for medical bone drill.
Xiongcai XC303 electronic speed control (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER, PEDAL TYPES.
In April, a client from Brazil sent us a message, inquiring about motor controller for Stryker bone drill. He said he was running the maintenance business for several notable brands, and seeking for partner in providing motor controller. In the past years, too many damaged Stryker bone drill have been abandoned due to lack of repair and short of motor controller.
He saw our motor controller XC303 on internet, and found that the performance of our parts was similar with original Stryker7. Whether we can send him samples for test. We show him the detail of our products, especially the installation dimensions and operation rules between triggers and Hall sensors. He confirmed the following item complying to his tool, and wished to test parts.
a) this product can be inserted into handle and fixed with our any loose;
b) The magnets fixed on the trigger align with Hall Sensors;
c) The max range between magnets and Hall sensors is greater than 5.5mm(for cutting off the magnetic field and stopping completely) and the minimum range is zero(for maximizing the performance of bone drill).
The samples were charged but we promised that expense would be refunded in mass production. This client order 3 pcs each for single trigger and dual trigger.
Three week later, client came back to us and told us the bone drill were working well, XC303 motor controller matched Stryker7 exactly, and working as excellent as original products. Xiongcai XC303 ESC will promote the performance to a new level.
Xiongcai is serving top clients in multitude of industries, such as automotive fuel pump, water pump, medical devices, electrical tool, we are partnering with top clients in their lines, ACHR, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. Our team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals.
Contact us and have a try, we are ready to put your device in its best.
Xiongcai E3 motor control (ESC) with 400A, 12S, 54V Power System
The Xiongcai E3 motor controller (electronic speed control, ESC) is packed with a potent combination of hardware and software advancements. This product is designed for high-level R/C car sport.
12S LiPo batteries, 400A continuous current, 54V, the power system will push your vehicles to their limit and beyond. MAYBE itâ??s the most powerful ever in motor control of R/C car and truck.
Even Xiongcai E3 ESC is a power monster, it is still under control. For the safety, Xiongcai team designed excellent protection measures.
a. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds.
b. BEC voltage is optional 6v/7.4v/8.4v, up to your servo spec.
c. The brake force and reverse force is programmable for enhancing drivability.
d. Thermal management is meticulously designed. With the integration of a forged Al heatsink, the design maximizes the airflow throughout the system and cool down critical components, keeping your vehicle working at optimal condition.
You can tune the parameters of ESC for different driving condition, from rugged terrains to pavement, off-road or on-road, Xiongcai E3 ESC will promote the performance to a new level.
Xiongcai Tech has been specializing the motor controller (electronic speed control or ESC) design and manufacture for 15 years, and committed to promoting drivability of R/C model cars.
Xiongcai team is capable of excellent RD ability and committed to creating powerful reliable motor control, if you have any special requirements on your motor control, we will help you achieve your ideas.
Xiongcai E3 Motor Controller For RC Car Performance, Handling and Reliability, We have All
Xiongcai has stayed focused on motor controller for automotive fuel pump, water pump, RC car & truck, drones and medical devices since 2011, and focusing on motor controller only.
I know that our clients can search a lot of companies that manufacture motor controller, but you will find that most of them provide OEM only. We are one of the few motor controller suppliers providing a full service from design to supply of finished product.
Engineered from ground up, we provide solution according to customerâ??s application. For example, Xiongcai designed a high performance motor controller for RC car for a client. I believe most of manufacturer could make powerful motor controller, but the most important thing is how to control the power and eliminate the negative impact.
Xiongcai E3 motor controller is such a perfect product for RC car for a notable brand. With 400A continuous current, 800A peak current, 6-12S Lipo cells, 16-54v high performance power system, how to control the monster? Xiongcai RD team designed perfect protection measures to protect the motor and keep it work at its best.
a. Peak current limit. This measure will limit the peak current to avoid damage to motor;
b. Single PWM periodical current detection limit enables reducing impact of pulse current to motor;
c. Intelligent thermal management. Fans will be turned on or turned off automatically according to internal temperature; also when abnormal heavy current is detected, the motor controller will cut off power supply to fan,
d. When a short-circuit takes place in fan, the test mode will start running. If the fan canâ??t be recovered in three times test, the power to fan will be cut off, and the ESC is still working;
And there are some more protection measures, including low voltage protection, throttle loss protection, abnormal braking protection, over-temperature protection etc.
Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme.
Xiongcai Electronic Speed Controller for RC Models Cars-- Full-featured, Easy-to-use and Performance
Electronic speed controller used to be mysterious to me, because what I can see is just a tiny black case, how can I manage it? Xiongcai Technology help manage it easily.
â??Drive motor more efficientlyâ?? is our motto. We committed to making full-featured, performance and easy-to-use electronic speed controller. For example, XC201-E3, a motor speed controller which we designed for a top RC hobby products supplier, is high-performance and easy to use.
Current
400A continuous current, 800A short circuit protection. Wave-by-wave current limiting will control the peak current avoiding damage to motor and prolonging service life of power system.
Power
6-12S Li-po. When DC is applied, discharge capacity and RBS should be considered.
BEC
Built in powerful DCDC conversion circuit provides potent loading capacity for BEC. BEC provides 6.0V, 7.4V, 8.4V options and 10A continuous current, 25A peak, select the one that is suitable for servo.
Bluetooth Communication
Static data (ESC records) and real-time running data will be monitored on the mobile app, everything is under control.
You also can manage parameter setting and firmware upgrade on the App.
Precise Active Free-wheeling
Original creative freewheeling identification technology achieves microsecond response for precise active free-wheeling, reducing heat of MOS dramatically. The results are cooler ESC temperature, longer runtime and high performance.
Protection Measure
Multiprotection measures have been designed, under voltage, throttle loss, abnormal braking, over temperature, short circuit, abnormal Hall sensing etcâ?¦
Acceleration
12 grades acceleration gives you unique experience from regular start to quick start, even launch control. Before you set this item, you should completely consider the ground, gripping ability of tires, vehicle configuration etc.
Maybe you canâ??t experience launch control in reality, but you enjoy it through your RC cars. Ignite your passion, enjoy the driving.
There are more configurations you can set on App for better handling experience, such as
Running Mode
Forward with brake.
Forward and reverse with brake.
Forward and reverse. the reverse zone.
Turbo Timing
The Turbo timing can additionally increase the motor rpm. It will be initiated at full throttle. It is usually used on a long straight road to release the maximum power of the motor. The higher
If you have went through this article, you will find electronic speed controller (ESC) is easy to set, you can practice by setting every item.
Parts have been adopted by NISSAN, XPeng, FAW Group, Jingyi Group, Cummins, Feilong Automotive Component, and more.
Contact us now, you are worth a better motor control solution.
Xiongcai E3 Motor Speed Controller Integrates High-performance and Safety To Promote Handling Experience of RC Car
When you drive your RC cars, what comes to mind must be power, speed or something else rather than protective measures. Maybe the RC car manufacturers might think about this, but we care about it.
We have been engaging in motor speed controller since 2011, what we focused on is driving motor more efficiently, more reliably and more safely. When we engineered E3-a powerful motor speed controller, we kept this thought in mind.
E3 motor speed controller was engineered according to a clientâ??s concept. This client is one of the largest RC hobby products suppliers, running RC cars, boats, planes etc. they wanted to designed a powerful BLDC brushless motor speed controller for 1:6th scale vehicle. The client said according to their experience, many enthusiasts would have a problem that the high power would damage motor or motor speed controller. We needed to balance high performance and safe. This was exactly what we were good at.
Engineered from the ground up, a potent integration of hardware and unique software that will redefine handling experience of RC cars. With power system 400A continuous current, 800A peak, 6-12S Li-po batteries, the ESC will put your RC car in its extreme. A built-in DCDC conversion circuit provides potent loading capacity for BEC with options 6.0V, 7.4V, 8.4V and output 10A continuous current, 25A peak. You can choose proper power according to your servo performance.
The Al forged case integrates a 40mm fin and heatsink allows airflow throughout the package, promoting thermal performance to a new level. Fan will be turned on or off by motor speed controller according to internal temperature of system.
We have designed perfect protection measures while endowing E3 motor speed controller with high performance, including under voltage, throttle loss, abnormal braking, over temperature, abnormal Hall sensing, short circuit and more, especially the active freewheeling and wave-by wave current limiting.
The unique application of active freewheeling identification technology provides microsecond track and response time, minimizing MOS heating.
Wave-by wave current limiting will protect motor and transmission mechanism, prolonging service life of power system.
Xiongcai E3 motor speed controller is an efficient system designed for enthusiasts RC cars, putting them in extreme and running at their best.
Engaging in electronic speed controller for automotive fuel & water pumps, electrical tools for 13 years, we are one of the few manufacturers that focus on electronic speed controller only.
We dedicate to designing reliable and powerful electronic speed controller for Hobby products such as RC cars, boats, planes in addition to manufacturing controllers for automotive fuel pump & water pumps, electric tools and drones.
Besides the potent E3-the one which was designed for ultimate experience of a 1:8th even 1:6th RC cars, we designed several mild ones. Here I introduce E10 electronic speed controller to you.
Even E10 is the mildest one in this product family, with power of 2-4S Li-Po batteries, 140A continuous current, it will generate fierce power. Like the super car, the launch control start will get you excited. There are 12 grade acceleration from 1% to 12%, you can adjust it according to your habit.
This electronic speed controller is applicable to both sensored or sensorless brushless motor, we provide bespoke service. What we do is help you achieve your ideas. It supports max motor speed of 240,000RPM. In another word, you must ensure that the motor speed does not exceed 240,000RPM to avoid any damage to both ESC and motor.
BEC output is optional, 6.0V or 7.4V, the current is 5A continuous and 10A peak. Which is much more proper? Itâ??s up to your servo specification.
An excellent thermal management is essential to a powerful electronic system. With the integration of fan and forged Al heatsink, E10 electronic speed controller maximizes airflow throughout the system, cooling critical component for high-performance and longer runtime. The fan is controlled by ESC according to internal temperature.
All configuration can be done on mobile app via Bluetooth, running mode, acceleration, braking force, turbo timing, initial PWM etc. It is ideal for training, you can familiarize function and features step by step.
We have designed a series of protection measures including low voltage, over voltage, over temperature, throttle loss, abnormal braking, short circuit protection and so on. You donâ??t need to worry about quality and reliability. You just feel drivability, handling and enjoy the racing, we take care of the rest.
Our products have been verified in automotive industries and drones, adopting by clients such as NISSAN, Xpeng, Feilong Auto Component (FLACC), Shenhai Electrical Appliance, Wuhan Cummins, FAW Group, Jingyi Group, Linrui Auto Electrical Appliance, Unicent, and more. Parts are certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637.
Contact us for detail. If you have any special concept or requirement, we will help you achieve your ideas.
Xiongcai E3 Motor Speed Controller Integrates High-performance and Safety To Promote Handling Experience of RC Car
1. Current: Continuous current 400A, peak 800A
2. Output: 6-12s Li-Po
3. Motor: Sensored or sensorless brushless motor
4. Speed:
we are one of the few manufacturers that only focus on electronic speed controller.
1. Current: Continuous current 140A, peak 300A
2. Output: 2-4s Li-Po
3. Motor: Sensored or sensorless brushless motor
4. Speed:
Xiongcai E8 Electronic Speed Controller Makes Your RC Cars & Trucks More Competitive
1. Current: Continuous current 160A, peak 320A
2. Supply: 3-6s Li-Po
3. Motor: Sensored or sensorless brushless motor
4. Speed:
Top Five High-performance Electronic Speed Controllers (ESC) for RC Hobby
It's a tedious task to select excellent electronic speed controllers. You will see that all the products are marked best when you search them on google. As a motor control expert, Xiongcai has evaluated some top brands of RC hobby BLDC electronic speed controller (ESC) over performance and listed top five of them for you to refer.
1. Castle Creation MAMBA XLX2
Castle is one of the most famous suppliers in RC hobby field, so is the ESC. The MAMBA XLX2 electronic speed controller (ESC) can handle power system of 3-6S Li-Po, 33.6v max, 150A continuous current, BEC 5v -8v, 20A peak, providing outstanding experience. With waterproof design, you can drive it in all weather conditions.
2. HIPRacing FLUX ELH-6S
HPIRacingâ??s electronic speed controller (ESC) is engineered for RC cars and trucks racing. A powerful brushless ESC FLUX ELH-6S, with up to 150A continuous current, you can enjoy your skill and all kinds of stunts you can dream of. This product is designed for RC racing, the roaring clamor will get you excited.
3. Spektrum Firma 160A
This electronic speed controller (ESC) is released by Horizon Hobby, it has been widely used in its sub-brands like Losi, ARRMA, AXIAL, etc. the most famous collocation must be Losi Baja Rey Desert Truck. With continuous current 160A, this ESC provides a smooth operation and neutral demonstration. Its explosive force is not as strong as HPIRacing Flux ELH-6Sâ??s, but operation is relevantly stable.
4. Traxxas Velineon VXL-6S
The advantage of Traxxas RC Cars and Trucks is stability management. The Velineon VXL is not as explosive as HPI Flux ELH-6S is, but it excels in vehicle stability and handling. BEC output 6V, 10A provides excellent loading capacity. The perfect application is its application on Unlimited Desert Racer Truck.
5. Xiongcai E8 (XC E8 ESC)
Xiongcai technology is specializing in BLDC electronic speed control (brushless ESC), and is one of the few companies that focuses on BLDC brushless ESC only. The E8 electronic speed controller with system of 3-6S Li-Po, 160A sustainable current, BEC 6A current, 15A peak is must-have for enthusiasts. It is engineered to provide ultimate handling experience. 12 levels of acceleration allow you experience the quick start-up like super car. The team has designed perfect protective measures to secure your motor and power system. For example, the application of active free-wheeling identification technology provides microsecond track and response, reducing MOS generating heat and avoiding excessive current pulse. Wave-by-wave current limiting will control the peak of each wave of current to avoid damaging motor and drivetrain, prolonging service life of power system.
Maybe the evaluation is not comprehensive due to driving condition, but you can get general expression on performance of above five electronic speed controllers for selecting a proper one.
300A 14S Motor Speed Controller for Water Sports Surfboard RC Boats
comes with features:
1. Current: Continuous current 300A
2. Output: 6-14s Li-Po
3. Motor: BLDC Sensored or sensorless brushless motor
4. Speed:
XC700 DC 96V Motor Controller for Solar Pumping System
XC700 motor controller is mature product designed for solar pumping system. This product was released several years ago, the performance and reliability had been verified and approved by clients and market, it's one of the best sellers in XC motor control product family.
Demand on solar pump controller could be diverse, we provide bespoke service for customers. If you have any specific requirement, we help you achieve it.
This motor controller for solar pump comes with characteristics:
Specification:
Model: XC700-SP-96V-1300w
Working Voltage: DC24-150V
Rated Voltage: 96V
Rated Current: 13.5A
Working Temp: -30-85
Humidity: 95% Max
Dimension: 115*96*39mm (PCBA), 144*170*61mm (set)
Protection: Antiflood protection, water lack protection, undervoltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection and reverse, polarity protection
Start/stop and speed control
Suitable for applications powered by solar panels, MPPT algorithm inside
XC Motor Control has been specializing in motor control since2011, we have considerable expertise in enhancing motor control. The potent combination of hardware and advanced software can keep your device working at its best.
Have a try, you are worth a better solution.
XC701 DC36V Motor Controller for Fountain Pumping System
Let water dance to music.
XC Motor Control Technology is one of the earlier companies involved in motor controller for fountain pump controller. XC701 motor controller is engineered for (music) fountain pumping system and has been widely used in China for landscape. Excellence in performance and reliability had been recognized and approved by clients and market. After several iterations, XC701 motor controller can adapt to various application circumstance. itâ??s one of the best sellers in portfolio of XC motor controllers.
Technical requirements on fountain pump controller could be diverse and particular, backed by sophisticated RD team, we are able to provide bespoke service for customers. If you have any specific requirement, we help you achieve it.
This BLDC motor controller for fountain pumping system comes with characteristics:
Specification:
Model: XC701
Working Voltage: DC13.5-30.5V
Rated Current: 31.5A
Working Temp: -45-85â??
Humidity: 95% Max
Dimension: 71*68*26mm
Protection: Undervoltage protection, over voltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection
Protocol: DMX512 protocol
XC Motor Control Technology pioneers advanced solutions in BLDC motor control system. With considerable expertise, we have been serving top clients such as FAW group, Dongfeng NISSAN, XPeng Aero car, Cummins and more. The potent combination of hardware and advanced software can keep your device working at optimal.
Have a try, you are worth a better solution.
300A 14S Waterproof Motor Speed Controller with Water Cooling System Designed for Water Sports Surfboard RC Boats
In the last years, XC technology has released 6 electronic speed controllers (ESC, motor controller) for RC cars and RC trucks and earned a place in this field. This year, we release a new product-motor controller for water sports, such as surfboard, thruster or sea scooter and RC boats, letting you enjoy the fun of surfing even in calm lakes.
1. Current: Continuous current 300A
2. Output: 6-14s Li-Po
3. Motor: BLDC Sensored or sensorless brushless motor
4. Speed:
Motor Controller Designed Meticulously for Performance and Satisfaction
1. Voltageï¼?DC16~36V
2. Rated Currentï¼?10A
3. Working Tempï¼?-40ï½?85â??
4. Working Humidityï¼?95%
5. Size: 87*84*15mm
6. Protectionï¼?under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit
7. PWM speed regulation
Xiongcai is one of the most professional motor controller manufacturers, focusing on motor controller only.
You may ask that there are so many motor controller manufacturers in China, Why Should I choose your products? If you have an in-depth knowledge of Chinese motor controller manufacture industry, you will find that most of them just provide OEM service. We are one of the few engineering and development-oriented companies.
we provide solution according to customer�¢??s application. For example, Xiongcai designed a high-performance motor controller for automotive fuel pump. I believe most of manufacturer could make powerful motor controller, but the important thing is how to control the power and eliminate the negative impact, keeping it run at its best.
Xiongcai XCA105 motor controller is a high-performance product designed for a notable brand in automobile industry. With 8A continuous current, DC8-18v power system, Xiongcai RD team designed perfect protection measures to protect the motor.
a. Peak current limit. This measure will limit the peak current to avoid damage to motor;
b. Single PWM periodical current detection limit reduces impact of pulse current to motor;
c. Waterproof is designed for all weather condition, up to IP67. The ESC is potted in epoxy to protect the electronics and improve heat transfer, enabling motor controller working in any condition at a lower temperature;
And there are some more protection measures, including under voltage protection, over current protection, low temperature and over-temperature protection, plugging, reverse connection, short circuit protection, etc.
Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. We can put your RC car in extreme.
Xiongcai Water Pump Motor Controller Approved by The Biggest Water Pump Manufacturer In China.
1. Voltage DC16~36V
2. Rated Current 4.6A
3. Working Temp -40 125
4. Working Humidity 95%
5. Size: 61*56*17mm
6. Protection under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit
7. PWM speed regulation
Xiongcai Technology has been specializing in motor controller since 2011, we engineer, analyze, test and supply finished products.
At present, in China, most of manufacturers provide OEM service only, they don�¢??t support you in technology, but just provide OEM. We serve you from initial concept to product supply.
Unicent Automotive Tech, a company focused in automotive thermal management, contacted us and inquired ab out motor controller for automotive water pump. They have high requirements on reliability, performance and safety. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed budget.
Xiongcai team wanted to give a shot. R&D team designed a potent combination of software and hardware meticulously, called XCA107 with power system of 4.6A, DC16-36V, making parameters up to the customer's requirements. After one year test and verification, XCA107 motor controller for water pump was approved. The client has introduced this product for 4 years till now.
XCA107 Motor Controller For water pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit. That means this product would stop when the protection measure is triggered, but never be damaged. Furthermore, this product is certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. You don�¢??t need to worry about the reliability.
We are one of the few engineering companies providing a full service from design to supply, and serving top clients in auto industries, such as NISSAN, XPeng, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more.
Xiongcai Technology XCA105 Motor Speed Controller For Fuel Pump
1. Voltage DC16~36V
2. Rated Currentï¼?10A
3. Working Tempï¼?-40ï½?85â??
4. Working Humidityï¼?95%
5. Size: 87*84*15mm
6. Protectionï¼?under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit
7. PWM speed regulation
With 12-year experience, Xiongcai Technology, a pioneering company in specialized field of motor control.
Founded by experienced engineer, started the innovative journey in motor control. Established in 2011, Xiongcai Technology emerged as a pioneer driven by a commitment to drive motor more efficienctly and put your devices to their limit.
We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products.
Xiongcai released a motor controller XCA105, engineered for automotive fuel pump. With pwoer system of 8A current, DC8-18V, push the performance to its limit. Minus 40 degree to 125 degree working temperature enables the motor controller work at any weather condition.
The dimension is 37*34*8mm, compact design makes installation more flexible. You don't need to make a big space for this component.
Safety is vital to automotive application. It's small, but it is engineered to function without sacrificing safety. The protection measures include under voltage, over voltage, over current low temperature, over temperature, plugging, reverse connection and short circuit protection. safety is always the first priority.
Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto (FLACC), Keshen, Unicent and more. We can put your RC car in extreme.
Contact Shenzhen Xiongcai Technology Co., Ltd for detail.
XC701 DC36V Motor Controller for Fountain Pumping System
Let water dance to music.
XC701 motor controller is engineered for (music) fountain pumping system. Performance
and reliability of had been verified and approved by clients and market. After several
iterations, XC701 motor controller can adapt to various application circumstance. itâ??s one
of the best sellers in XC motor control product family.
Demand on fountain pump controller could be diverse, we provide bespoke service for
customers. If you have any specific requirement, we help you achieve it.
This motor controller for fountain pumping system comes with characteristics:
Specification:
Model: XC701
Working Voltage: DC13.5-30.5V
Rated Current: 31.5A
Working Temp: -45-85â??
Humidity: 95% Max
Dimension: 71*68*26mm
Protection: Undervoltage protection, over voltage protection, overcurrent short circuit
protection, over-temperature protection, motor stall protection
Protocol: DMX512 protocol
XC Motor Control has been specializing in motor control since 2011, we have
considerable expertise in enhancing motor control. The potent combination of hardware
and advanced software can keep your device working at optimal.
Have a try, you are worth a better solution.
Automotive Fuel Pump Controller XCA105 Improves Performance of Fuel Pump
Xiongcai automotive fuel pump controller XCA105 is engineered to improve running efficiency of automotive oil pump.
This automotive fuel pump controller is designed for a large automotive fuel pump manufacturer. Engineered from ground, we provided a full service from design, analysis, testing to production. This product has been applying in top brands FAW group, Dongfeng NISSAN, Cummins, etc.
XCA105 motor controller can adjust the working parameters of fuel pump according to Vehicleâ??s running conditions and engine status to ensure stable fuel supply. The automotive oil pump controller will monitor oil pump all the time, if there is an abnormality, the controller will send signals for detection, ensuring vehicle safety.
XCA105 automotive fuel pump controller features:
1. Working voltage: DC8~18V
2. Rated current: 8A
3. Operating temperature: -40 ~ 125
4. Working humidity: 95% Max
5. Overall size: 37*34*8MM
6. Protection type: under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit protection
7. CSIPER 25 radiation and conduction level 3 certified
8. ISO11452-2 EMS level 4 BCI 100MAcertified
9. ISO10605 contact discharge 8KV and air discharge 16KV certified
10. ISO16750 environment certified
This product is highly reliable and durable. To adapt extreme working environment. automotive oil pump controller adopts high temperature resistance, waterproof, dustproof and vibration-resistant designs to achieve high reliability and durability.
We are an IATF16949 certified company. We proud ourselves on providing reliable, durable products for top clients like FAW Group NISSAN, XPeng Aero car, Cummins and more
Have a try, with expertise in this specialized field, Xiongcai Motor Control Technology Co., Ltd is able to take your technological aspirations to a new level.
XCA107 Motor Controller for Automotive Water Pump
The XCA107 motor controller is designed to raise efficiency of automotive water pump. It controls automotive water pump and turns it ON/OFF with respect to water level in the tank. Excellent compatibility with electronic control unit enables automotive water pump controller to collaborate with other systems.
XCA107 automotive water pump controller can withstand long-term harsh environment such as high temperature, bumping and extreme weather conditions, achieving high reliability and durability. This product has been introducing by FAW group, Feilong Auto Components, Unicent etc.
XC Motor Control Technology developed XCA107 automotive water pump controller with particular attention to quality, operational safety, ease of use and reliability. It comes with:
Specification:
1. Working voltage: DC16~36V
2. Rated current: 4.6A
3. Operating temperature: -40 ~ 125â??
4. Working humidity: 95% Max
5. Dimension: 61*56*17MM
6. Protection type: under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit protection
7. PWM speed regulation, FG signal feedback, FOC sine wave control
8. CSIPER 25 Certified
9. ISO11452-2 certified
10. ISO10605 certified
11. ISO16750 environmental certified
12. ISO7637 certified
XC Technology has been engaging in this specialized field of motor control since 2011, serving notable customers such as FAW group, Dongfeng NISSAN, Cummins, XPeng Aero car, Unicent and more.
Contact us for detail. XCA107 automotive water pump controller efficient, reliable and ease of use.
XC700 DC 96V Motor Controller for Solar Water Pumping System
Xiongcai Technology is one of the earlier companies engaged in BLDC motor control. At the early stage, we focused on development and manufacture of automotive oil pump, water pump controllers, solar pump controllers, fountain pump controllers.
XC700 motor controller is a mature product designed for solar pumping system. This product was released several years ago, the performance and reliability had been verified and approved by clients and market, it's ideal for agricultural irrigation. With water level indication, you can take action according to situation, eliminating any unexpected element. This product is one of the best sellers in XC product portfolio of motor controllers.
This motor controller for solar pump comes with characteristics:
Specification:
Model: XC700-SP-96V-1300w
Working Voltage: DC24-150V
Rated Voltage: 96V
Rated Current: 13.5A
Working Temp: -30-85â??
Humidity: 95% Max
Dimension: 115*96*39mm (PCBA), 144*170*61mm (set)
Protection: Antiflood protection, water lack protection, undervoltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection and reverse, polarity protection
Start/stop and speed control
Suitable for applications powered by solar panels, MPPT algorithm inside
Demand on solar pump controller could be diverse, we provide bespoke service for customers. If you have any specific requirement, we help you achieve it.
XC Motor Control has been specializing in motor control since 2011, we have considerable expertise in enhancing motor control. The potent combination of hardware and advanced software can keep your device working at its best.
Have a try, you are worth a better solution.
Xiongcai Motor Controller XCA107 Designed For Automotive Engine Cooling
1. Voltage DC16~36V
2. Rated Current 4.6A
3. Working Temp -40 125
4. Working Humidity 95%
5. Size: 61*56*17mm
6. Protection under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit
7. PWM speed regulation
Established in 2011, founded by experienced engineer, XIONGCAI TECH is a pioneer in specialized field of motor controller (electronic speed control or ESC), especially in water pump for auto engine cooling.
Xiongcai had engineered a motor controller for automotive engine cooling---XCA107, which has been using in automotive engine for years.
ACHR, a company rooted in automotive water pump for decades, contacted us and inquired about motor controller for automotive water pump. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed cost budget.
Xiongcai team wanted to give a shot. Engineered from ground up, Xiongcai R&D team designed a combination of software and hardware meticulously called XCC107, making all parameters up to customers standard. After one year test and verification, Xiongcai XCA107 motor controller for water pump was approved. The client has introduced this product for several years till now.
Xiongcai XCA107 Motor Controller for water pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit, this means the motor controller may stop working due to some reason but never be damaged.
We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products.
Xiongcai motor controllers have been applied to many top brands in auto industries, such as Jingyi Group, ACHR, FAW Group, FAWDE, Shenhai Electrical Appliances, Kesen, Cummins and more.
Contact us Shenzhen Xiongcai Technology Co., Ltd for more detail, we deliver excellent solution to you.
