Specifications:
Voltage Rating 310 VAC
Capacitance Range 0.0047 10uF
Capacitance Tolerance ±10% std.
Features:
-Used in across-the-line
-Interference suppression circuit
-Obtaining certification recognition from
#VDE,
#ENEC and
#UL institutions
Characteristics
1. Highly reliable because of its excellent Self-Healing performance.
2. Dissipation Factor is normally low and it is #stable #against #high #frequency and change of temperature.
3. Recommended for #high- #frequency #circuits like s-curve compensating circuit
Specifications:
Operating Temperature: -40â?? TO + 85â??
Rated Voltage:DC 100V, 250V, 400V, 630V
Capacitance Range:0.01 TO 8.2Mfd
Capacitance Tolerance: ±5%, ±10%, ±20%
Dissipation Factor: 0.001 at1KHz (Typical 0.002 Max)
#Characteristics:
1. High reliability at high current stress.
2. Self-healing properties.
3. Flame retardant plastic case and epoxy resin.
4. Low losses, high dv / dt capability.
5. High moisture 主resistance.
6. High stability of capacitance and long life
Specifications:
Operating Temperature:-40 TO + 85
Rated Voltage:250, 400, 630VDC
Capacitance Range:0.0047 TO 3.9 µF
Capacitance Tolerance: ±5%, ±10%
Insulation #Resistance:
Câ?¦0.33uF ; IR 50000MOhm
C>0.33�µF ; IR 15000MOhm
Dissipation Factor:0.1% max. at 1KHz, 20â??
Dielectric Strength:160% of rated voltage for 60s
Characteristics
1.Metallized structure, widely used in high voltage, high frequency and pulse circuit
2.Low loss and small inherent temperature rise
3.Negative temperature coefficient of capacitance
4.Excellent active and passive flame resistant abilities
Specifications:
Rated Temperature: 85 for VR (DC);75 for VR (AC)
Operating Temperature Range: -40~+105(+85 to +105âdecreasing factor 1.25% per for VR DC)
Rated Voltage: 1000V, 1400/1600V, 2000V
Capacitance Range: 0.00022µF ~ 0.22µF
Capacitance Tolerance: ±2%(G), ±3%(E), ±5%(J), ±10%(K),�±20%(M)
Dissipation Factor: 0.001, (20 1kHz)
Characteristics
1. High reliable with its Self-Healing performance.
2. Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance.
3. Good reputation in use with filtering, DC blocking coupling and general communication equipment.
ð???Specifications:
Operating Temperature:-40â?? TO + 85â??
Rated Voltage:DC 100V, 250V, 400V, 630V
Capacitance Range:0.01 TO 6.8µF
Capacitance Tolerance:±5%, ±10%, ±20%
Dissipation Factor: 0.01 (AT 1KHZ)
#Characteristic:
1. Ideal for high AC current applications, such as CRT deflection for R-F generators and pulse-forming networks.
2. Temperature Coefficient is negative and variety linear over the operation temperature.
3. Coated with flame retardative epoxy resin which provides from humidity and mechanical damage
Specifications:
Operating Temperature: -40 TO + 85
Rated Voltage: DC 1000V, 1250V, 1500, 1600V and 2000V
Capacitance Range: 0.001 TO 0.15Mfd
Capacitance Tolerance: ±5%, ±10%
Dissipation Factor: 0.1% (20, 1KHz)
Insulation Resistance: 25000M�© (CR 0.1µF) (20, 1min)
2000s (CR>0.1�=µF) (20, 1min)
Features
- Electrical apparatus use metalized film with precisely quality control
- Low D.F. (dissipation factor), lower temperature rise.
- High I.R. (insulation resistance)small size
- High safety & high reliability
- Durability and characteristics of frequency, etc.
Applications:
Power Gates
Air-Con
Micro water pump
Cleaning machine
Washing machines
Air Compressor
Electric Fan
Ventilator and exhaust fan
Fridge
Generators
Illuminating lamps
Features
- Low D.F. (dissipation factor), good self-healing character
- High I.R. (insulation resistance)
- High safety & high reliability
- Anti-Striking current, strong over-carrier capacity
ð??¡ Applications:
Power Gates
Air-Con
Micro water pump
Cleaning machine
Washing machines
Air Compressor
Electric Fan
Ventilator and exhaust fan
Fridge
Generators
Illuminating lamps
Characteristics:
1.High reliability
2.Box type provides the identical outer appearance.
Specifications:
Operating Temperature Range: -40â +85
Rated Voltage: 63V, 100V, 160V, 250V, 400V, 630V
Capacitance Range: 0.0010 µF 2.2 µF
Features:
-High ripple current, high dv/dt withstand capability.
-Low ESL and ESR
-Plastic case, epoxy resin sealing(UL 94V-0)
-DC-Link and coupling/filtering for Inverter,Industrial and high-endpower supplies and Solar inverters
Specifications:
Reference standard: GB/T17702(IEC 61071)
Rated voltage: 500V~1200V
Capacitance range: 0.68uF~110uF
Characteristic
1.Good reputation in use with consumer & industrial electronics.
2. Optimum for automatic insertion due to their small size and lightweight.
3. Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance.
Specifications:
Operating Temperature:-40â?? TO + 85â??
Rated Voltage:DC 100V,250V,400V,630V,1000V,1200V
Capacitance Range:0.001 TO 0.22�µF
Capacitance Tolerance:�±5%, �±10%, �±20%
Insulation Resistance:0.1�µF 30,000 M�© min, >0.1�µF >15000 M
Dissipation Factor: 0.1 (AT 1KHZ)
Dielectric Strength:200% of rated voltage for 5 sec.
Features
Low D.F. (dissipation factor),
good self- healing character
High I.R. (insulation resistance)small size
High safety & high reliability
Anti-striking current, strong over-carrier capacity
ð??¡ Applications:
Power Gates
Air-Con Micro
water pump
Cleaning machine
Washing machines
Air Compressor
Electric Fan
Ventilator
exhaust fan Fridge
Generators
Illuminating lamps
Main Specifications
Operating Temperature Range:-20 to +70
Rated Current and Voltage:50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength:250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance:50m
Full Travel:0.25 0.1mm
Operating Force:1.0 �±0.3N 1.6�±0.5N 2.6�±0.5N
Common Height:
4.3mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Height can be set at the full discretion of the consumer.
Strong Features
Type:2 Pin DIP tact switch
Operation Life Cycles:60000,80000,100000
Variety of lever lengths
Supplied with radial taping
Allows automatic insertion onto PC board with the radial auto insertion machine
RoHS and RAECH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Fore: 2.0±0.5N
Strong Features
Type: DIP tact switch with LED
LED Color: Red, Blue, White, Yellow, Green
Operating Life cycles: 500000
Models with ground terminals are available of protection against static electricity.
Some of output terminals can be also used as jumper leads to make the circuit design easy.
RoHS and REACH Compliant
Main Specifications
Operating Temperature Range: -40 to +90
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: â?¥100M�©
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤100m�©
Full Travel: 1.3�±0.2mm
Operating Force: 1.6�±0.5N
Strong Features
Type: DIP with ground terminal tact switch
Operation Life cycles: 100000
Soft feeling
High operating force
Steady and low contact resistance
Compatible with most surface mount soldering processes
Improved operation by using a larger push plate
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50m�©
Full Travel: 0.25�±0.1mm
Operating Force:1.6�±0.5N
Common Height: 2.5mm, 2.7 mm, 2.9mm, 3.1 mm, 3.4mm, 3.7 mm, 4.3mm, 5.0 mm
The Heightï¼?Hï¼?can be set at the full discretion of the consumer.
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 80000
Positive tactile feeling
Various heights, Top or side actuated
Reflow solderable, SMD type, which can be directly mounted on PC board
Available With anti-ESD ground terminal
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: â?¥100M�©
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤100m�©
Full Travel: 0.15�±0.05mm
Operating Force:2.3�±0.3N
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 200000
IP65 equivalent to IEC/EN 60529
Miniature tact switches, With high contact reliability
Fixing poles of the cover available, Compact-sized, Side actuated
PCB-base structure, RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Force: 1.6±0.5N
Strong Features
Type: SMD surface-mounted tact switch
Operating Life cycles: 50000
Flux proof, Reflow solderable.
Sharp click feel with a positive tactile feedback
Highly reliable contacts sealed structure.
Larger top surface of the stem improve mounting speed.
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Force: 1.6±0.5N
Strong Features
Type: SMD surface-mounted tact switch
Operating Life cycles: 50000
Highly reliable contacts sealed structure.
A larger top surface of the stem improve mounting speed.
Reflow solderable, RoHS and REACH compliant
typical Applications
Function and band selectors switches for audio devices, video recorders, communication devices, cameras, automotive sets, electric home appliances, compact electronic devices, etc.
Main Specifications
Operating Temperature Range:-20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 100m
Full Travel: 0.25±0.1mm
Operating Force: 1.6±0.5N
Common Height:
4.3mm,4.5mm,5.0mm,5.5mm,6.0mm,6.5mm,7.0mm,7.5mm,8.0mm,8.5mm,9.0mm
The Height H can be set at the full discretion of the consumer.
Strong Features
Contact type: Vertical and Horizontal with bracket DIP tact switch
Operation Life cycles: 80000
Outline dimension 6.0mm x 6.0mm
Variety of lever lengths, Positive tactile feedback
Good drop resistance, RoHS and REACH compliant
Available with anti-ESD (Electro Static discharge) ground terminal
Additional models and versions available
Main Specifications
Operating Temperature Range: -20C to +70C
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Force: 1.0±0.3N1.6±0.5N2.6±0.5N
Common Height:3.8mm,4.3mm,5.0mm,6.0mm,7.0mm
The HeighHcan be set at the full discretion of the consumer.
Strong Features
Type: DIP tact switch
Operation Life Cycles:40000,50000,60000
Positive tactile feeling
Various Knobs for low or high profile actuations
Cambered terminals to ensure self retention
Vertical and horizontal operating direction
RoHS and REACH compliant
Main Specifications
Operating Temperature Range : -20C to +70C
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: 00MoHM
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50mOhm
Full Travel: 0.25�±0.1mm
Operating Force: 1.0�±0.3Nï¼?1.6�±0.5N
Common Height:
4.3mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Heightï¼?Hï¼?can be set at the full discretion of the consumer.
Features
Type: 2 Pin DIP tact switch
Operation Life cycles: 100000
Large choice of caps
Supplied with radial taping
Allows automatic insertion onto PC board with the radial auto insertion machine
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20deg to +70deg
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: â?¥100MOhm
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50mohm
Full Travel: 0.25�±0.1mm
Operating Force: 1.0�±0.3Nï¼?1.6�±0.5Nï¼?2.6�±0.5N
Common Height:
4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Height H can be set at the full discretion of the consumer.
Strong Features
Type: DIP tact switch
Operation Life cycles: 60000 80000 100000
Several kinds of height
Cambered terminals to ensure self retention
Meets REACH and RoHS standards
Main Specifications
Operating Temperature Range: -30 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 100m
Full Travel: 0.15±0.05mm
Operating Force:1.8�±0.5N
Strong Features
Type: 2 Pin DIP tact switch
Operating Life Cycles: 50000
Good drop resistance
Improve mounting density of components on PC board.
Reflow solderable
Contacts are completely sealed, enhancing reliability
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤100m�©
Full Travel: 0.25�±0.1mm
Operating Force: 2.6�±0.5N
Common Height: 1.5mm, 1.6 mm
The Height can be set at the full discretion of the consumer.
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 100000
Dust proof and Flux proof
Low-profile and Lightweight
Good drop resistance, Reflow solderable
Contact sealed construction offers a highly reliable switch
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25 ±0.1mm
Operating Force: 1.0±0.3N, 1.6±0.5N, 2.6±0.5N
Common Height:
4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Height H can be set at the full discretion of the consumer.
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 50000, 80000,100000
Variety of lever lengths
PCB surface mount with flush and protruded actuator
Positive tactile feedback with double actions
Distinctive snapping action and extended mechanical/electrical durability.
Available in embossed taping packages for automatic mounting
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: â?¥100M�©
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50m�©
Full Travel: 0.25�±0.1mm
Operating Force: 1.0�±0.3N, 1.6�±0.5N, 2.6�±0.5N
Common Height:
4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Heightï¼?Hï¼?can be set at the full discretion of the consumer.
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 60000, 80000,100000
Positive tactile feeling, Variety of lever lengths
PCB or SMT Terminals, Off-Momentary ON function
Snap-in type, which can be directly mounted on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit design easy.
RoHS and REACH compliant
Typical Applications
For the operating of electronic devices like telecommunication equipment, audio devices, office devices, communication devices, measuring instruments, TVs, video recorders, automotive sets, etc
Main Specifications
Operating Temperature Range: -30 to +85
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 100m
Full Travel: 0.15±0.0.1mm
Operating Force: 1.6±0.3N
Strong Features
Type: SMD surface-mounted tact switch
Operation Life cycles: 200000
Positive tactile feedback, Dust proof and Flux proof
High contact reliability, Low-profile and light weight
Contributes to downsizing and light weight of application devices
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: â?¥100M�©
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50m�©
Full Travel: 0.25�±0.1mm
Operating Force: 1.0�±0.3N, 1.6�±0.5N, 2.6�±0.5N
Common Height:
4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Heightï¼?Hï¼?can be set at the full discretion of the consumer.
Strong Features
Type: SMD surface-mounted tact switch
Operating Life cycles: 60000, 80000,100000
Various Knobs for low or high profile actuation
PCB or SMT Terminals, Off-Momentary ON function
Snap-in type, which can be directly mounted on PC board.
Some of the output terminals can be also used as jumper leads, thus making circuit design easy.
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤100m�©
Full Travel: 0.25�±0.1mm
Operating Force: 1.6�±0.5N
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 200000
Compact-sized, Side actuated
High contact reliability, Good drop resistance
Reflow solderable , Fixing poles of the cover available
PCB-base structure ,which can be directly mounted on PC board
Available in embossed taping packages for automatic mounting.
Sealed with flux proof, RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤100m�©
Full Travel: 0.25�±0.1mm
Operating Force:2.6�±0.5N
Common Height: 2.5mm, 2.7 mm, 2.9mm, 3.1 mm, 3.4mm, 3.7 mm, 4.3mm, 5.0 mm
The Heightï¼?Hï¼?can be set at the full discretion of the consumer.
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 60000
Large choice of caps,Top or side actuated
Sharp feeling, Reflow solderable
SMD type, which can be directly mounted on PC board
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.2 ±0.1mm
Operating Force:1.6 ±0.5N, 2.6 ±0.5N
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 20000,30000,40000,50000
Low-profile , Reflow solderble
Quiet operation and definite clicking feel
Improve mounting density of components on PC board
Contacts are completely sealed, enhancing reliability.
Available with ground terminal for electrostatic discharge
RoHS and REACH compliant
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: â?¥100M�©
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤100m�©
Full Travel: 0.2�±0.1mm
Operating Force:1.6�±0.5N, 2.6�±0.5N
Strong Features
Type: SMD surface mounted tact switch
Operating Life cycles: 20000,30000,40000,50000
Sharp feeling, High contact reliability
Low-profile and light weight
Compact size of 3x3x0.65mm
Contributes to downsizing and lighter weight of application devices.
Reflow solder able , Rated to RoHS and REACH standard
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25�±0.1mm
Operating Force: 1.0±0.3N , 1.6±0.5N ,2.6±0.5N
Common Height: 3.8mm, 4.3 mm, 5.0mm, 6.0 mm, 7.0 mm
The Height H can be set at the full discretion of the consumer.
Strong Features
Type: SMD surface-mounted tact switch
Operating Life cycles: 80000
Various Knobs for low or high profile actuation
PCB or SMT Terminals, Off-Momentary ON function
Snap-in type, which can be directly mounted on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit design easy.
RoHS and REACH compliant
Typical Applications
Wide range of using in electrical devices such as telecommunication equipment, audio devices, office devices, communication devices, measuring instruments, TVs, video recorders, automotive sets, etc
These film capacitors are designed for DC-link and coupling/filtering for inverter, industrial & high-end power supplies and Solar inverters
Features:
-Double sided metallized polypropylene structure
-Low loss and small inherent temperature rise
-Excellent active and passive flame resistant abilities
-Negative temperature coefficient of capacitanceThese film capacitors are designed for DC-link and coupling/filtering for inverter, industrial & high-end power supplies and Solar inverters
Main Specifications
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Force: 2.6±0.5N
Strong Features
Type: DIP tact switch with LED
LED Color: Red, Blue, White, Yellow, Green
Operation Life cycles: 500000
Good tactile feedback
Laser etched symbol with LED illumination
A variety of housing, cap options available for selection
RoHS and REACH compliant
Features:
Surface Mount 4mm Square Single-Turn Cermet
Small in size
Standard resistance range: 10Ohm ~2M Ohm
Insulation Resistance: 500 VDC, 100megohm min
Power rating: 70degree, 0.25W /125degree 0W
Temperature range: -55~+125 degree
Temperature coefficient: +/-100ppm/ degree, +/-200ppm/degree
Resistance tolerance: +/-20%
Standard packing: 500pcs/ per tape reel
Features
Operating Temperature Range: -40 ~+105
Body Diameters Range From 5D to 20D
Wide Operating Voltage from 18V to 1800V
Full compliance with RoHS and REACH
Applications
Industrial equipment
Home appliance
Industrial equipment
Lighting products
Telecommunication or telephone system
Feature:
Mounting Type: Surface Mount
Multiturn trimmer
Cermet / Industrial / sealed Trimming Potentiometer
2 terminal styles: 3269W, 3269P
standard resistance range from 10�© to 5M�©
Power (Watts):0.25W, 0W
Tolerance: �±10% (100�© ~ 1M) ; �±20% (R1M)
Tube packing, 50 pcs/ tube
Applications:
measuring linear distance,
angles or rotations in production equipment,
industrial test and measurement equipment,
medical equipment.
Description:
Trimmer 3323, 1/4" Square Single Turn Cermet Potentiometer, Top Adjust 3323P, 3323C, 3323R, Side Adjust 3323S, 3323W, 3323V,3323D
Features:
Standard Resistance Range: 10�© - 2M�©
Resistance Tolerance: �±5%, �±10%
Absolute Minimum Resistance: â?¤1% R or 2�©
Contact Resistance VariationCRV: â?¤1% or 2�©
Insulation Resistance: R1 1G (500Vac)
Withstand Voltage: 707Vac
Effective Travel: 250
Standard Packaging: 50pcs, per tube
Description:
Standard Resistance Range 1KÃ? - 100K
Resistance Tolerance ±5%
Independent Linearity ±0.5%
Effective Electrial Travel 3600 - 10
Treninal Resistance 0.2% or 5
Noise â?¤3% R or 5
Insulation Resistance Râ?¥1G�©
Withstand Voltage 101.3kPa710V, 8.5kPa470V
Standard Packaging 10pcs/box, 20pcs/box
RoHS& REACH compliant
Brief Description:
Trimmer 3386, 3/8" Square Single Turn Cermet Trimming potentiometer, 3386B, 3386C, 3386H, 3386J, 3386W, 3386S, 3386X, Kingtronics.
Detailed Description:
Standard Resistance Range 10�© - 5M�©
Resistance Tolerance �±5%, �±10%
Absolute Minimum Resistance â?¤1% R or 2�©
Contact Resistance Variation CRVâ?¤3%
Insulation Resistance R1 1GI (100Vac)
Withstand Voltage 600Vac
Effective Travel 300
Standard Packaging 50pcs, per tube
Detailed Description:
3/8" Square Multiturn Trimming Potentiometer, Cermet, Sealed, 3296W,3296X,3296Y,3296Z,3296P.
Standard Resistance Range 10�© - 5M�©
Resistance Tolerance �±5%, �±10%
Withstand Voltage 640Vac
Temperature Range -55â?? ~ +125â??
Effective Travel 25+/-2 turns nom
Standard Packaging 50pcs, per tube
Features:
Reflow solderable
With rotation stopper
Low profile type (1.2mm in height)
Conform to RoHS Directives
Achieved excellent endurance characteristics by using "Metal-glaze" film
Standard packing: 2500pcs/reel
Standard resistance range: 100Ohm to 1M Ohm
Features:
ï¼?Multi-loop/Glass glaze/Seal
ï¼?Surface Mounted Trimming Potentiometer
ï¼?3mm Square
ï¼?Top adjust
Standard resistance range: 10Ohm ~2M Ohm
Resistance tolerance: +/-20%
Standard packing: 1000pcs/ per tape reel
