Tyre bead wire is a high quality carbon metal. It is incorporated in the structure of the tyre to withstand bumps, heat and other hazardous conditions. radial tyre bead wire is 1.6 mm and nylon tyre bead wire is 1.10mm. Therefor, the wire obtained from end of life tyres is also of high quality matieral and resuing it can be a highly lucrative for the businesses as well as the environment. Scrap Bead Wire is used in converting to shot blasting, high tension springs, wire mesh, wire baskets, nails, cutting tools. Since this is extracted from tyres it is available at a very reasonable rates.
A Scrap truck or Bus Tyre consists of 20-25% of high quality steel in it. The metal bead wire is obtained when the waste tyre is put into the shredding machines. It is very important to derive the bead wire in one single piece.
The wire can easily be oxidised so protecting it from different atmospheric agents is important. So to meet our clients' expectations, we have set strict standards and quality control techniques.
)
This steel has a high carbon content and is of good grade. It is built into the construction of the tyre to endure bumps, heat, and other potentially dangerous situations. As a result, recycled tyre wire is of very high quality and meets industry standards. To prevent machines farther down the processing line from usury, contemporary technologies tend to remove the wire as soon as possible. Pre-shredding is commonly followed by a first granulation step, in which the rubber chips are filtered through a 15 to 25 mm screener, depending on the plant layout. A magnetic mechanism separates the steel wire from the rubber immediately after this granulation. Along with the wires, 10 to 35 percent by weight of rubber and textiles are removed, hence the total material recovery varies depending on the contamination grade of the material (rubber/fiber). Steel typically makes up 10% to 20% of the weight of an old passenger car tyre. A typical shredding factory generates huge quantities of steel tyre wire, with quality varying depending on the technology, storage, and management systems used by the factories.
Another important component in assessing the material's quality is the steel's resistance to atmospheric agents. The material is quickly oxidised since it is shaped in tiny wires. As a result, protecting the wire from any atmospheric contaminants is an important part of improving its quality.
We are a well known organization in the market as the manufacturer and supplier of Reclaimed Rubber. Butyl Reclaimed Rubber can be easily moulded into various shapes & forms highly applicable in this industry. We provide this range of butyl reclaimed rubber in different specifications as per the as per the varied needs of our clients
Butyl Reclaimed Rubber
Butyl Reclaim Rubber that is known for bearing high-temperature rubber products. Butyl Reclaim Rubber is unique product which is recycled out of scrap butyl rubber tubes and butyl capsules that are refined and without grains. The scrap Butyl tubes are pure Butyl and no other polymer content is present.
Butyl Reclaimed rubber products are known for their airtight nature and are often used to manufacture butyl inner tyres, butyl capsules, and other rubber products. Some of the characteristics that make our offered variety more popular in the industry are reliability, excellent performance, and durability.
Production Process Of Butyl Reclaimed Rubber
Butyl scrap is gathered from a network of licenced suppliers and then sorted to guarantee that only Butyl is accepted for reclamation. The entire procedure is split into two parts. The scrap is put through many stages in the first phase to guarantee that it is free of impurities.
In the second phase, the material is depolymerized and filtered for metal impurities using screens ranging from 60 to 100 mesh, and then refined for crushing the rubber granules using high-quality rubber refiners to obtain the original depolymerized Butyl reclaim rubber.
Butyl Reclaimed Rubber Producer And Supplier
Applications Of Butyl Reclaimed Rubber
Auto Tyres
Cycle Tyres
Tread Rubber
Molded Goods
Footwear
Adhesives
Black Colored Rubber Products
Cables
Tyre Inner Liner
Butyl Inner Tubes
Our primary focus concerns reclamation of rubber obtained from end-of-life truck and bus radial tyres. This type of rubber is made from the end of the tyre and the thread's peeling. Various grades of reclaimed rubber are produced matching different needs and utility.
Our product range includes medium, fine, super fine and high tensile grades of reclaimed rubber.
This reclaimed rubber is used in auto tyres, conveyor belts, rubber sheets, rubber moulded goods and transmission belts.
Grades
Medium
Fine
Super Fine
High Tensile
Crumb rubber is produced from end-of-life Truck And Bus radial tires. During the recycling process, steel and tire cord (fluff) are removed, leaving tire rubber with a granular consistency. . The particles are sized and classified based on various criteria. The granulate is sized by passing through a classiyfing screen, the size based on mesh (ASTM). The most common mesh sizes include 10 Mesh, 24 mesh, 40 mesh, 60 mesh and 80 mesh.
Applications Of Rubber Crumb:
Tyres
Sealant & Paint Additives
Molded Plastic
Conveyor belts
Adhesives
Extruded articles
Rubber Mixtures
CRMB
Crumb rubber is produced from end-of-life Truck And Bus radial tires. During the recycling process, steel and tire cord (fluff) are removed, leaving tire rubber with a granular consistency. . The particles are sized and classified based on various criteria. The granulate is sized by passing through a classiyfing screen, the size based on mesh (ASTM). The most common mesh sizes include 10 Mesh, 24 mesh, 40 mesh, 60 mesh and 80 mesh.
Applications Of Rubber Crumb:
Tyres
Sealant & Paint Additives
Molded Plastic
Conveyor belts
Adhesives
Extruded articles
Rubber Mixtures
CRMB
Crumb rubber is produced from end-of-life Truck And Bus radial tires. During the recycling process, steel and tire cord (fluff) are removed, leaving tire rubber with a granular consistency. . The particles are sized and classified based on various criteria. The granulate is sized by passing through a classiyfing screen, the size based on mesh (ASTM). The most common mesh sizes include 10 Mesh, 24 mesh, 40 mesh, 60 mesh and 80 mesh.
Applications Of Rubber Crumb:
Tyres
Sealant & Paint Additives
Molded Plastic
Conveyor belts
Adhesives
Extruded articles
Rubber Mixtures
CRMB
Crumb rubber is produced from end-of-life Truck And Bus radial tires. During the recycling process, steel and tire cord (fluff) are removed, leaving tire rubber with a granular consistency. . The particles are sized and classified based on various criteria. The granulate is sized by passing through a classiyfing screen, the size based on mesh (ASTM). The most common mesh sizes include 10 Mesh, 24 mesh, 40 mesh, 60 mesh and 80 mesh.
Applications Of Rubber Crumb:
Tyres
Sealant & Paint Additives
Molded Plastic
Conveyor belts
Adhesives
Extruded articles
Rubber Mixtures
CRMB
Crumb rubber is produced from end-of-life Truck And Bus radial tires. During the recycling process, steel and tire cord (fluff) are removed, leaving tire rubber with a granular consistency. . The particles are sized and classified based on various criteria. The granulate is sized by passing through a classiyfing screen, the size based on mesh (ASTM). The most common mesh sizes include 10 Mesh, 24 mesh, 40 mesh, 60 mesh and 80 mesh.
Applications Of Rubber Crumb:
Tyres
Sealant & Paint Additives
Molded Plastic
Conveyor belts
Adhesives
Extruded articles
Rubber Mixtures
CRMB
Crumb rubber is produced from end-of-life Truck And Bus radial tires. During the recycling process, steel and tire cord (fluff) are removed, leaving tire rubber with a granular consistency. . The particles are sized and classified based on various criteria. The granulate is sized by passing through a classiyfing screen, the size based on mesh (ASTM). The most common mesh sizes include 10 Mesh, 24 mesh, 40 mesh, 60 mesh and 80 mesh.
Applications Of Rubber Crumb:
Tyres
Sealant & Paint Additives
Molded Plastic
Conveyor belts
Adhesives
Extruded articles
Rubber Mixtures
CRMB
Crumb rubber is produced from end-of-life Truck And Bus radial tires. During the recycling process, steel and tire cord (fluff) are removed, leaving tire rubber with a granular consistency. . The particles are sized and classified based on various criteria. The granulate is sized by passing through a classiyfing screen, the size based on mesh (ASTM). The most common mesh sizes include 10 Mesh, 24 mesh, 40 mesh, 60 mesh and 80 mesh.
Applications Of Rubber Crumb:
Tyres
Sealant & Paint Additives
Molded Plastic
Conveyor belts
Adhesives
Extruded articles
Rubber Mixtures
CRMB
Crumb rubber is produced from end-of-life Truck And Bus radial tires. During the recycling process, steel and tire cord (fluff) are removed, leaving tire rubber with a granular consistency. . The particles are sized and classified based on various criteria. The granulate is sized by passing through a classiyfing screen, the size based on mesh (ASTM). The most common mesh sizes include 10 Mesh, 24 mesh, 40 mesh, 60 mesh and 80 mesh.
Applications Of Rubber Crumb:
Tyres
Sealant & Paint Additives
Molded Plastic
Conveyor belts
Adhesives
Extruded articles
Rubber Mixtures
CRMB
The steel wire derived from end of life tyres is further processed to manufacture steel cut wire shots. The steel has a high carbon and is of good grade. Steel Cut Wire Shots are obtained by cutting wire into lengths equal to the wire diameter. Steel cut wire shots are widely used in foundry, forging and automotive industries for cleaning, deburring, descaling, shot peening and surface improvement. Steel cut wire shots are available in size 1.6mm. The Cut wire shot manufactured by us in as cut by shape.
Applications of Cut Wire Shots
Cut wire shots are frequently used in the sand cleaning, rust cleaning, reinforcing, forming, and stress-relieving processes in the casting, forging, machinery, metallurgy, heat treatment, steel structure, grid structure, container, ship, repairing and construction, bridges, mining, etc. sectors. Additionally, cut wire shots are used for stone cutting, magnetic shot casting, roughness pretreatment prior to electro plating, and surface cleaning and coating of various materials. For heavy concrete and blast furnace refractories, cut wire shot is frequently used as an addition to improve performance characteristics like wear resistance, high temperature resistance, anti-erosiveness, electrostatic shielding, and radiation resistance
