EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application.
FUNCTIONï¼?
C-band optical signal overall amplification
Covering the wavelength range of 1528 ~ 1565nm
Support systems to achieve different cross-section radio repeater transmission
HIGHTLIGHT:
Wide operating wavelength range:1528nm~1565nm
Three Optical Amplifier C-Band applications: Booster , In-line, Pre-amplifier
Low noise figure: typical: 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
ACC voltage adjustable
Mid-stage access for DCM or OADM
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR
Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier.
A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension.
An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link.
A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver.
Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
The 100G OTN Transmitter supports one QSFP28 client interface and one CFP line-side interface to support single-channel 100Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
Description
The 200G Muxponder Transmitter supports two QSFP28 client interfaces and one CFP2 line-side interface to support single-channel 200Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
Function
* Media conversion
* Signal repeating
* Lambda conversion
Product Highlights
* Support single channel 200Gbps
* Client Side: 2x QSFP28 module
* Line Side: CFP2 200Gbps coherent module
* Ultra-long-distance transmission: FEC technology can be used to achieve 1500km transmission without regeneration
* Large dispersion tolerance: 4nm
* Support port loopback test
* Support 80 channel wavelength tunable
HTF 200G Muxponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates.
The 200G Muxponder from HTF offer a choice of pluggable QSFP28 Client Side Optics and CFP2 -DCO Coherent DWDM Line Side Optics based on distance and capacity requirements.
The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 200G Muxponder models fits for HT6000 Series CH04, CH08, CH20 Chassis.
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types.
Highlight
3R signal regeneration
Re-transmission
Re-shaping
Re-timing
Multi-rate supports 1Gbps ~ 10Gbps
Supports Loopback Test
Supports ALS
Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
The 400G Muxponder Transmitter supports four QSFP28 client interface and one CFP2 line-side interface to support single-channel 400Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
Function
Media conversion
Signal repeating
Lambda conversion
Highlight
Support single channel 400Gbps
Client Side: 4x QSFP28 module
Line Side: CFP2 400Gbps coherent module
Ultra-long-distance transmission: FEC technology can be used to achieve 1000km transmission without regeneration
Large dispersion tolerance: 20000ps.nm
Support port loopback test
Support 80 channel wavelength tunable
HTF 400G Muxponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates.
The 400G Muxponder from HTF offer a choice of pluggable QSFP28 Client Side Optics and CFP2 -DCO Coherent DWDM Line Side Optics based on distance and capacity requirements.
The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 400G Muxponder models fits for HT6000 series CH04, CH08, CH20 chassis.
SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Function:
Media conversion
Signal repeating
Lambda conversion
Highlights
3R signal regeneration
Re-transmission
Re-shaping
Re-timing
Multi-rate supports 1Gbps ~ 10Gbps
Supports Loopback Test
Supports ALS, LFP
Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
40G&100G Transponder supports three 40G or 100G service access. The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Function:
Media conversion
Signal repeating
Lambda conversion
Highlight:
Support single channel 40Gbps/100Gbps large particle transmission
Client side interface: support 3xQSFP28 module
Line side interface: support 3xQSFP28 module
Support DDM digital diagnosis
Support ALS function
Support LFP function
40G&100G Transponder supports three 40G or 100G service signals are relayed and amplified, and can be converted into three WDM standard wavelength optical signals, so that the multiplex unit can perform wavelength division multiplexing demultiplexing on optical signals of different wavelengths. A metropolitan wavelength division short-range transmission scheme suitable for 40G or 100G rates.
