DAQ-GP-CAM is a wireless time-lapse camera based on 4G or WiFi, which can take pictures at certain intervals and upload to FTP server, launched by Shanghai Data Acquisition IOT Technology Co., Ltd. It can be widely used to capture the data of instruments, and can also be used for photo capture and video surveillance in the fields of cultural relics, rock and soil, hydrology and water conservancy.
This product supports WiFi/4G Ethernet access to the network, take photos regularly and upload the photos to the designated FTP server or store them in an SD card. With 4G wireless network card, it can be used in scenarios where there is no WiFi network outdoors.
2 Service Concept
Our company solemnly promise you:
You buy more than just products, but also meticulous and thoughtful technical support.
We provide free remote guidance, remote configuration and commissioning services, and send data to the server specified by the customer.
Free IOT solution consulting services!
3.1 Camera Parameters and Selection
Pixels: 2 million, 3 million, 5 million optional, default 2 million
Lens: 2.8mm/4mm/6mm
SD card: Yes
Power supply: 12V DC
Weight: 0.35kg
3.2 Electrical Characteristics
Power supply mode: 12V DC or battery power
(Power interface: DC5.5*2.1mm female socket, internal positive and negative outside).
3.3 Communication Characteristics
Default networking mode: Ethernet/WiFi, 4G
Image upload: FTP server
3.4 Structural Characteristics
Antenna type: glue stick type external antenna
Material: PC plastic (shell)
Main body protection level: IP65
Size: 50mm 50mm 30mm
3.5 Working Environment
Ambient temperature -30C~70C, humidity 0~95% (non-condensing)
4 The Core Advantages of the Product
Simple installation and rapid deployment, helping IoT projects to land quickly
Small size
Rainproof, suitable for outdoor environments
Comes with fill light, suitable for taking photos at night
Remote configuration of parameters
5 WiFi Camera Configuration
6.1 Connect to Computer
Power on the camera and connect it to the computer with a network cable.
Check the IP address on the camera label, the default is 192.168.1.88 (the actual value on the camera label shall prevail).
Set the computer IP to the same network segment as the camera, enter the camera IP in the browser, and enter the login interface
By default, the username and password are admin (actually subject to the camera label).
7 Timed Photo Upload Settings
Capture photos can be stored to SD card or uploaded to FTP server at any time and interval.
DAQGPCT485 split core current transformer is a kind of current sensor transformer which can convert AC analog signal into RS485 digital signal launched by Shanghai Data Acquisition IOT Technology Co LTD The product has builtin 32bit ARM series MCU and highprecision metering chip and is a multipoint calibrated current conversion module It has the characteristics of high precision and fast response DAQGPCT485 can directly interact with common data acquisition gateways DTU programmable controller PLC and host computer
This product is widely used in AC motor lighting equipment air compressor heating ventilation and air conditioning equipment building selfcontrol system equipment OEE open rate industrial Internet rural power transformation projects and other scenarios of current monitoring and acquisition scenarios
2 Service Concept
Our company solemnly promise you
You buy more than just products but also meticulous and thoughtful technical support
We provide free remote guidance remote configuration and commissioning services and send data to the server specified by the customer
Free IOT solution consulting services
3 Product Characteristic Parameters
Line Sequence Definition
Red12V BlackGND Yellow485A White485B
Length of LineDefault 1 meter
Acquisition Characteristic
Current detection range AC 02A100AOther large range transformers can be customized
Electrical Characteristic
Power supply mode524V DC
Operating power consumption05W
Operating frequency5060Hz
Communication Characteristic
Transmission modeRS485
Communication protocol Modbus RTU
Structural Characteristic
MaterialABS plastic housing
Installation methodBuckle mounting
Working Environment
Temperature 20C70C
Storage Environment
Temperature 20C80C
4 The Core Advantages of the Product
High precision measuring chip high measurement accuracy
Open type design easy to install
Easy installation and fast deployment helping IOT projects land quickly
5 Description of the Modbus Communication Protocol
51 Serial Port Communication Parameters
Baud rate9600 Data bit8 Verify NONE Stop bit1
52 Function Code Definition
The upper computer uses 03 function code to read data or receive alarm data
The host computer controls the lower machine equipment transformer using 06 function code
