Export Blend Crude Oil, offered by us, is procured from the best manufacturers in the industry. We work with end Refinery) who provide Export Blend Crude Oil that is extracted using advanced mechanisms. Our Export Blend Crude Oil is available mainly in two grades. We provide Export Blend Crude Gost at reasonable prices.
Minimum quantity of Export Blend Crude Oil should be 50.000 MT.
Grades Available :
Export Blend Crude Gost 51 85S-2002 (R.E.B.C.O)
Export Blend Crude Gost 9965-76 (R.E.B.C.O.)
Mazut Oil offered by the end seller(Refinery) is available in different grades. We work with well-known manufacturers in the industry. Thus, Mazut Oil, provided by us, is well refined and processed using high-end equipment and methods. Owing to our stringent quality policy, we make sure to conduct necessary checks over our Mazut Oil before it is finally dispatched to the customers.
Minimum ordered quantity of our Mazut Oil should be 50.000 MT.
Grades Available:
MAZUT M100 GOST 10585-99
D2 Diesel Gas Oil is offered by our end sellers considering the needs of diverse industrial sectors. We provide D2 Diesel Gas Oil in different grades. Our D2 Diesel Gas Oil is mainly used to run several industrial as well as commercial automobiles. We take up bulk orders of D2 Diesel Gas Oil and deliver it timely. Our D2 Diesel Gas Oil is available at competitive rates.
Minimum ordered quantity of our D2 Diesel Gas Oil should be 50.000MT
Grade Available: D2 DIESEL GAS OIL L-0.2-62 GOST 305-82
OFFICIAL GUARANTEED SPECIFICATION
FOR RUSSIAN ORIGIN GAS OIL 0,2/62 GOST 305 â?? 82
RUSSIAN GAS OIL D2 GOST 305Ã?Â82
COMPONENT INIT MIN MAX
Density@ 20 deg C Kg / m3 0.870
Colour 1.0 2.0
Flash point, PMCC Deg C (C) 57 66
Kinematic viscosity @20 deg C C ST 3.0 6.0
Pour point Deg C (C) (*) 10.0
Cloud point Deg C (C) (*) 5.0
Mercaptan Sulphur 0.01
Acidity, mg / 1000 cm3 5
Iodine number g/100g 6
Ash %wt 0.01
Total Sulphur %wt 0.01 0.02
Copper corrosion 3hrs@50 deg C (Typical) 1 A
CCR on 10% Residues %wt 0.20
Cetane Index 45
Distillation range:
- 50% Recovered Volume deg C (C) 280
- Ã?Â90% Recovered Volume deg C (C) 350
- Bacteria MBC Fibre / it 500
- Bacteria CFU Fibre / it 1000
(*) Summer from March to October (PP 5.0 degrees C)
Summer from March to October (CP 0.0 degrees C)
Winter from November to February (PP 10.0 degrees C)
Winter from November to February (CP 5.0 degrees C)
The product is guaranteed by Seller not to contain bacteria and other living organism contamination above normal level (1000 CFU/l).
D2 Gasoil Gost 305-82
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude, and can be used without reformers and additives.
This is gas oil that is the second distillate that is obtained through the processing of crude oil. Reformers and additives are not required to make use of this fuel. The version of D2 that has lower sulphur content is GOST 305-82 and it is the presentation of this to the market that has helped in a major reduction in pollution in many cities.
GOST 305-82
GOST 305-82 is D2 with lower sulphur content. GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 0.02% max. This is known as Ultra Low Sulphur fuel. Low sulphur fuel is that with 0.2% sulphur content.
The GOST variant for D2/Gasoil is GOST 305-82 and specifies now a sulphur content of 0.02 MAX which is according to the ISO standard.
Specifications for Gasoil D2 L-0.02/62 / GOST 305-82
Cetane index, min 45Distillation, degrees C 50% max 280Distillation, degrees C 99% (final biling point) max 360Kinematic viscosity at 20 Deg C, mm2/c (cst) 3.0 to 6.0Sulphur, max % 0.02Hydrogen Sulphide AbsCopper Strip Test PassesWater Soluble Acids and Alkalis AbsActual gum content, mg/100cm3, max 40Acidity, mg/100cm3 of gasoil, max 5Iodine number, g/100g, max 6Ash, % max 0.01Cokability of 10% residue, max. 0.20Filtration Coefficient, max. 3Sediments AbsWater AbsDensity at 20 Deg C, kg/m3, max 0.86
Standard Ultra Low Sulphur Diesel Oil D2
This is gas oil that is the second distillate that is obtained through the processing of crude oil. Reformers and additives are not required to make use of this fuel. The version of D2 that has lower sulphur content is GOST 305-82 and it is the presentation of this to the market that has helped in a major reduction in pollution in many cities.
GOST 305-82
GOST 305-82 is D2 with lower sulphur content. GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 0.02% max. This is known as Ultra Low Sulphur fuel. Low sulphur fuel is that with 0.2% sulphur content.
Standard diesel fuel (sometimes called diesel oil) comes in two grades:Diesel #1 (or 1-D) and Diesel #2 (or 2-D).
Diesel fuel also is measured by its viscosity. Like any oil, diesel fuel gets thicker and cloudier at lower temperatures. Under extreme conditions, it can become a gel and refuse to flow at all. Diesel #1 flows more easily than Diesel #2, so itâ??s more efficient at lower temperatures.
The two types of oil can be blended, and most service stations offer diesel fuel blended for local weather conditions.
While D2 is also known as #2 Diesel, Russian Federation and Belarus refineries never use the name D2.
They use operation terms like Gasoil 0.2, Gasoil 0.1, ULSD/50-10 ppm/EN590 (EN590 means that standard of the quality of the product according EU regulation EN590.
Liquefied petroleum gas (LPG), also called LPG, GPL, LP Gas, liquid petroleum gas or simply propane, is a flammable mixture of hydrocarbon gases used as a fuel in heating appliances and vehicles.is a clean-burning fossil fuel that can be used to power internal combustion engines. LPG-fueled vehicles can produce significantly lower amounts of some harmful emissions and the greenhouse gas carbon dioxide (CO2). LPG is usually less expensive than gasoline, it can be used without degrading vehicle performance, and most LPG used in U.S. comes from domestic sources.
The availability of LPG-fueled light-duty passenger vehicles is currently limited. A few light-duty vehiclesâ??mostly larger trucks and vansâ??can be ordered from a dealer with a prep-ready engine package and converted to use propane. Existing conventional vehicles can also be converted for LPG use. Since propane is stored as a liquid in pressurized fuel tanks rated to 300 psi, LPG conversions consist of installing a separate fuel system if the vehicle will run on both conventional fuel and LPG or a replacement fuel system for LPG-only operation.
Propane Fuel BasicsAlso known as liquefied petroleum gas (LPG) or autogas, propane is a clean-burning, high-energy alternative fuel thatâ??s been used for decades to power light-, medium- and heavy-duty propane vehicles.
Propane is a three-carbon alkane gas (C3H8). It is stored under pressure inside a tank and is a colorless, odorless liquid. As pressure is released, the liquid propane vaporizes and turns into gas that is used for combustion. An odorant, ethyl mercaptan, is added for leak detection.
Advantages of LPG
90% of propane used in the U.S. comes from domestic sources.Less expensive than gasoline. Potentially lower toxic, carbon dioxide (CO2), carbon monoxide (CO), and nonmethane hydrocarbon (NMHC) emissions.
Disadvantages of LPG
Limited availability (a few large trucks and vans can be specially ordered from manufacturers; other vehicles can be converted by certified installers).Less readily available than gasoline & diesel. Fewer miles on a tank of fuel. Fuel Economy and Performance Typically in fleet applications, propane costs less than gasoline and offers a comparable driving range to conventional fuel. Although it has a higher octane rating than gasoline rating (104 to 112 compared with 87 to 92 for gasoline), and potentially more horsepower, it has a lower Btu rating than gasoline, which results in lower fuel economy.
Aviation Turbine Fuel (Jet Fuel)
CIVIL JET FUELS
Aviation turbine fuels are used for powering jet and turbo-prop engined aircraft and are not to be confused with Avgas.
Outside former communist areas, there are currently two main grades of turbine fuel in use in civil commercial aviation :
Jet A-1 and Jet A, both are kerosene type fuels.
There is another grade of jet fuel, Jet B which is a wide cut kerosene (a blend of gasoline and kerosene) but it is rarely used except in very cold climates.
JET A-1
Jet A-1 is a kerosene grade of fuel suitable for most turbine engined aircraft. It is produced to a stringent internationally agreed standard, has a flash point above 38�°C (100�°F) and a freeze point maximum of -47�°C. It is widely available outside the U.S.A. Jet A-1 meets the requirements of British specification DEF STAN 91-91 (Jet A-1), (formerly DERD 2494 (AVTUR)), ASTM specification D1655 (Jet A-1) and IATA Guidance Material (Kerosine Type), NATO Code F-35.
JET A
Jet A is a similar kerosene type of fuel, produced to an ASTM specification and normally only available in the U.S.A. It has the same flash point as Jet A-1 but a higher freeze point maximum (-40�°C). It is supplied against the ASTM D1655 (Jet A) specification.
JET B
Jet B is a distillate covering the naphtha and kerosene fractions. It can be used as an alternative to Jet A-1 but because it is more difficult to handle (higher flammability), there is only significant demand in very cold climates where its better cold weather performance is important. In Canada it is supplied against the Canadian Specification CAN/CGSB 3.23
MILITARY
JP-4
JP-4 is the military equivalent of Jet B with the addition of corrosion inhibitor and anti-icing additives; it meets the requirements of the U.S. Military Specification MIL-DTL-5624U Grade JP-4. (As of Jan 5, 2004, JP-4 and 5 meet the same US Military Specification). JP-4 also meets the requirements of the British Specification DEF STAN 91-88 AVTAG/FSII (formerly DERD 2454),where FSII stands for Fuel Systems Icing Inhibitor. NATO Code F-40.
JP-5
JP-5 is a high flash point kerosene meeting the requirements of the U.S. Military Specification MIL-DTL-5624U Grade JP-5 (as of Jan 5, 2004, JP-4 and 5 meet the same US Military Specification). JP-5 also meets the requirements of the British Specification DEF STAN 91-86 AVCAT/FSII (formerly DERD 2452). NATO Code F-44.
JP-8
JP-8 is the military equivalent of Jet A-1 with the addition of corrosion inhibitor and anti-icing additives; it meets the requirements of the U.S. Military Specification MIL-DTL-83133E. JP-8 also meets the requirements of the British Specification DEF STAN 91-87 AVTUR/FSII (formerly DERD 2453). NATO Code F-34.
Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, Oil is any liquid petroleum product, which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 oC (104 o F). Oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha.
Fuel oil with following specification is available:
CST 180 and CST 230
Viscosity kinematic @ 50 C (max) 180 230Pour point (max) C 5.0 15.0Flash point (min) C 63 63Sulphur Total (max) %mass 3.0 3.0Carbon Residue Conradson (max)%mass 13 13Ash (max) %mass 0.05 0.05Water & sediment (max) %vol 0.5 0.5Colorific value higher (min) MJ/kg 42.2 42.2
Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, Oil is any liquid petroleum product, which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 oC (104 o F). Oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha.
Fuel oil with following specification is available:
CST 280 and CST 380
Density @ 15 �° C (max) kg /L 0.97 0.99Viscosity kinematic @ 50 �° C (max) 280 380Pour point (max) �° C 24 32Flash point (min) C 65 65Sulphur Total (max) %mass 3.5 3.5Carbon Residue Conradson (max)%mass 15 20Ash (max) %mass 0.15 0.15Water & sediment (max) %vol 1.0 1.0Colorific value higher (min) MJ/kg 41.7 41.7