SONYKS portable rugged GWT unit with 40 data channels. C/w large 10.4" multi-touch display, integrated pump. Incl. 2 batt., PSU, user manual and rugged case.
Highlights :
First unit with full onboard screen for GWT; top efficiency
Unmatched signal-to-noise ratio with broadband and FMC
Support non-Eddyfi rings; also Magneto-strictive collars
SPECS :
Batteries - typical life 8-10 hours
Cooling Sealed and fanless
Data storage SSD, 256 GB
Display resolution 1024 768
Display size 26.4 cm (10.4")
Display type Capacitive multi-touch, with 3 mm (1/8 in), chemically strengthened glass cover. Non-reflective (AR coating), anti-fingerprint (oleophobic coating), optically bonded LCD and touchscreen. Passive backlight enhancement
Nb. of transmit channels 40
Batteries - type 2x li-ion, rechargeable, DOT compliant
Compliance IEC 61010-1, CE, UKCA, WEEE, FCC Part 15, ICES-001
Data readback on PC software Yes
Output voltage 200V peak to peak
Probe recognition and setup (ChipID) Automatic with Sonyks tooling including ring type, size, serial number, pipe and angular orientation
Harness available Yes
Automated self-check Onboard capacitance and resistance testing
Connectivity Gigabit Ethernet, Wi-Fi 6 (802.11ax), USB 2.0 (Ã??3), HDMI
Dimensions (W x D x H) 355 288 127 mm (14.0 11.3 5.0 in)
Focussing options C-Scan imaging; Time delay focussing
GPS Accurate positioning to 2.5 m (8.2 ft)
Internal pump Yes
IP rating IP54
Laptop connectivity Yes
Maximum sample range 125ms (365m longitudinal mode; 200m torsional mode)
Max averaging 128
Nb. of receive channels 40
Onboard pump SSD, 256 GB
Receiver Gain Up to 100dB
Supported rings Sonyks Piezo and Magneto tools, Teletest and other commercial piezo-based rings
Supported Technologies/Techniques GWT, LRUT, MRUT
Storage Wi-Fi or Gigabit Ethernet
Transduction compatibility Magnetostrictive and Piezoelectric transducers
Weight (with batteries) 7.2kg (15.9 lb)
APPLICATIONS :
Corrosion Under Insulation (CUI) on insulated pipes and pipelines
High-speed, high-efficiency pipeline corrosion screening
Distribution, gathering, feeder or transmission pipelines
Pipeline integrity programs
Small diameter piping
Unpiggable pipes
Power plant pipelines
Buried pipeline inspection
Flanged pipes
River crossings
Road crossings
Drill riser inspection
Stainless steel pipe inspection
Chemical plant piping
Food piping
Non-Invasive & Non-Destructive Wireless Technology¯
Unlike other devices which must drill into the concrete and physically connect to the rebar to evaluate corrosion, the is completely non-destructive.
Fast & Accurate Real Time Data in Seconds
Data is collected, analyzed, and stored wirelessly within the mobile app on the tablet provided where it can be easily shared with team members.
Automatic Report Generation Simple
Detailed corrosion evaluation of reinforced concrete structures is presented as contour maps which are accessible in real-time on the tablet.
Recipient of NACE Corrosion Innovation Award
iCOR is the most advanced wireless corrosion measurement device for evaluating the health of reinforced concrete structures. iCOR detects corrosion potential, corrosion rate, and in-situ electrical resistivity. In 2019, the iCOR was presented the Corrosion Innovation Award by the National Association of Corrosion Engineers (NACE).
Applications
Detection of corrosion in reinforcement
Measurement of rebar corrosion rate
Evaluation of corrosion potential of rebar
Measurement of in-situ electrical resistivity
Assessment of concrete durability
Rehabilitation and repair of concrete structures
Software
Real-time contour mapping of corrosion rate, electrical resistivity, and corrosion potential
Accurate non-subjective algorithm-based interpretations
Multiple and directional parameters tested in a single measurement
Easy reporting and data exporting
Hardware
Non-destructive, and non-invasive wireless technology
Measurements obtained and evaluated within seconds
Simple and easy-to-use with minimal training required
Single-person operation device
Tablet included with free Android app
Award-winning patented technology
Patented Technology
iCOR benefits from the patented CEPRA technology that makes it possible to estimate the rate of rebar corrosion through a noninvasive, non-destructive approach. This means that the need to connect the device to the rebar to obtain measurements, which is the case for other commercial devices, is eliminated with the iCOR.
TECHNICAL SPECIFICATIONS :
Testing Time 3 to 30 seconds
Corrosion Rate Range 0 to 500 m / year
Corrosion Potential Range -800 to 200 mV / CSE
Electrical Resistivity Range 0 to 10,000 m
INCLUDED :
Beta unit, Tablet with hands-free carrying support, Data Analysis App., User manual, Connection sponges, USB cable, Conductive solution, Carrying Case.
Swift MFL portable instrument with a large, premium-quality multi-touch display. Incl.2 batt., power supp., manual, rugged case.
Highlights :
Fast, reliable corrosion screening even in service
Portable, battery-operated, sealed, large bright display
Simple to learn and operate, offers a high PoD
SPECS :
Acquisition modes Internal Clk, Encoder
Array connectors 1x IPEX
Batteries - typical life 6-8 hours
Cooling Sealed with internal fan
Data storage SSD, 100 GB
Display resolution 1024 768
Display size 26.4 cm (10.4)
Display type Capacitive multi-touch, with 3 mm (1/8 in), chemically strengthened glass cover. Non-reflective (AR coating), anti-fingerprint (oleophobic coating), optically bonded LCD and touchscreen. Passive backlight enhancement
Full recordable data for mapping Yes
High temperature inspections Yes
Highly portable easy to use system Yes
Multitouch control Yes
Nb. of input channels 8
Nb. of receiving elements Up to 128
Paperless Reporting Yes
Precision active steering No
Probability of detection 2mm diameter 20% loss
Probe type MFL
Rapid Coverage Yes
Rope access applications Yes
Setup creation/management Yes
Umbilical length 5m, 10m and 15m
Acquisition rate Up to 50 kHz
Automatic screenshot with defect entry Yes
Batteries - type 2x li-ion, rechargeable, DOT compliant
Compliance EN 61010-1, CE, WEEE, FCC, Part 15B, ICES-003, RoHS
Defect table (for reporting) Yes
Digitizing 16-bit resolution
Encoders and I/O connectors 1x 12-pin Fischer
Inspection workflows Optimized, with hard buttons
MFL receiver gain 23 - 64 dB
Programmable alarms Yes
Recordable UT data sets Yes
RFT/NFT/MFL connector Yes
Harness available Yes
Full screen mode Yes
Connectivity Gigabit Ethernet, Wi-Fi, HDMI, USB 2.0 (x3)
Dimensions (W x D x H) 355 288 127 mm (14.0 11.3 5.0 in)
Encoder inputs 3-axis Quadrature / Step /Dir, TTL 5V
IP rating IP65
Operating humidity 95%, non-condensing
Operating temperature 0 C to 40 C (32 F to 104 F)
Power supply/requirements Battery Operated
Programmable outputs Yes
Supported Technologies/Techniques MFL
Storage temperature 0 C to 40 C (32 F to 104 F)
Volume 13L (793.31 in3)
Weight (without batteries) 5.7 kg (12.5 lb)
Video output HDMI
Weight (with batteries) 6.6 kg (14.5 lb)
Features
Assisted acquisition and analysis
Automated real-time diagnosis and reporting
Digital continuity brick between acquisition
and reporting
Remote Assistance
UT PAUT Modular apps: Choose the software you need
Some apps can be used by non-certified personnel
Connectivity: Wi-Fi, 4G, etc
Windows environment ready for connecting
with your software
Aerospace specific
Automated real-time reporting avoiding dual
entries and human errors
Light-weight industrial tablet with large screen
display
Technical specifications
Dimensions: 280 mm 198 mm 80 mm 80 mm
Weight: 1.7 kg
Connectors :
- Power supply, transfer of settings and data: USB
- Ultrasonic translators: 2 Lemo 00
- Multi-element ultrasonic translators: 1IPEX
- Position encoder inputs ( 4) : Fischer 12cts
Analog signal output: none
Conformity with standards EN 12668-1:2010 and EN 15548-
1:2008 CE marking
Indoor and outdoor use
Relative humidity in operation 30 % to 80 % (non-condensing)
Protection class: IP54
Power supply: 100-240 V AC 50/60 Hz 1.6 0.9 A
Pollution degree: 2
Technical specifications :
Dimensions: 280 mm 198 mm 80 mm
Weight: 2kg
Connectors:
- Power supply and data transfer: USB
- Output: HDMI and LAN
- Ultrasonic transducers: 2 Lemo 00
- Eddy current probes: Fischer 16cts
- Position encoders inputs ( 4): Fischer 12cts
Analog signal output: no
Standards: UT 22232-1et EN 15548-1:2008 CE marking
Indoor and outdoor use
Temperature intervals: -10 C Â 45 C
Relative humidity in operation 30 % to 80 % (without condensation)
Protection index: IP54
Power: 100-240 V AC 50/60 Hz 1.6-0.9 A
Degree of pollution: 2
General technical data
Mode Output
Display panel Color LCD
Keypad 3 membrane push buttons
Audio 85 dBA 30 cm
Power, Radio, Auto Differing
Tone for each mode
Transmitter Modes
Same tone
Battery type 7.4 V Li-Ion pack
Typical operating time 15 hours constant use at 20 C/68 F
Dimensions 93 x 290 x 765 mm/3.66 x 11.42 x 30.12 inches
Weight (incl. batteries) 2.7 kg with Li-ion
Temperature Operating -20 C to 50 C, -4 F to 122 F
Storage -40 C to 70 C, -40 F to 158 F
Protection against water, dust and sand Conforms to IP66
Humidity 95% RH non condensing
The effects of condensation are to be effectively counteracted by periodically drying out the product.
Leica Detect DD220 (Device Only) - Article number: 850268
Leica Detect DD220 Smart Package - Article number: 6011593
Leica Detect DD220 Plumbers Package - Article number: 6014160
In The Box
Leica Detect DD220
DD220 Smart utility locator
Three year warranty
Li-Ion battery pack
A100 charger
A140 - car adapter cable.