1.Introduction of remote control
a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: electronic handwheel receiver;
b.Characteristics
The wireless transmission distance is open 40 meters, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 days;
The receiver is equipped with an external antenna to enhance the signal and is easy to install;
Electronic handwheel support: one 100PPR encoder one 6-speed axis selection switch one 3-speed magnification switch;
Electronic handwheel supports 6 custom buttons, corresponding to Siemens PLC address, which can be freely programmed;
6 custom buttons can control 6 switch outputs;
The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.
1 Applications
They could be used CNC system.
Key feature
1 .Auto Frequency Hopping When Noise.
Frequency band:433Mhz,ISM ,the output power up to10DB High receiver sensitivity 98DB.
32 hopping channels the channel frequency gap is 1Mhz.
the transmission is encrypted auto build communication network and pair. auto hopping when noise.
32 sets of wireless MPG could be used at the same time in one room.
2 Axis/Step band switch
To choose X/Y/Z/4/5/6 axis or close all axis by axis switch,to choose jog step by step switch.
3 Reliable and Stable Performance
Low power feature the life is longer than 2 months with 2 AA batteries
The wheel gear of aluminium MPG is clear,the position is accurate
The ABS MPG is anti-impact and heat-resistant.
4 enable key
the enable key is used to enable the mpg for safety.
5 Estop Function
To improve work effiency and assure safety.
5 General Characteristics
Parameter Description
Frequency bands ISM 433MZH
Supply voltage 2 AA batteries
Wireless transmission distance 40 meter
MPG Encoder 100PPR
Function Key 5 keys
Output power 10DB
Receiver sensitivity 98DB
Maximum axis 6 axis
Material ABS PC Aluminium
1. Application field
Mainly used in automatic control of floor grinder.
