6x4D TH Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling highly abrasive,high density slurries.
6X4 TH Tailing Pumps Detailed specification:
1. Horizontal, cantilevered, centrifugal, single stage slurry pump.
2.Long bearing life: The bearing assembly is with large diameter shaft and short overhang.
3. Wear resistant and anti abrasion wet parts: High chrome alloy and rubber etc. They are completely interchangeable with each other.
4. Easily replaceable liners: Liners are bolted to the casing.
5. Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing housing.
6 Discharge direction can be positioned at intervals of 45 degrees.
7. Simple maintenance throat bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple.
8. Sealing type: pcking seal,impeller sealing and mechanical seal.
9. Widely application: They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.
Slurry Pump Design Features
Single face, Multiple spring.
Spring protection Of rotation Cartridge.
The wash Spring does not require contact with the medium, thus overcoming the high viscosity.
crystallization of the material blocking the flexibility to protect the compensation ring, extending seal life.
Mechanical seal flush with auxiliary structure, thereby improving the sealing conditions to extend the seal life .
Easy to install without removing the seal cavity install both mechanical seals.
Suitable conditions containing the solid particles.
1.5 1B-TH Slurry Pump is end-suction, split-case, centrifugal slurry pumps have set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, Application customization comes standard with this line by applying a wide variety of metallic and elastomeric parts options, an assortment of seal arrangements, and a standard impeller adjustment mechanism incorporated into every base assembly.
Slurry Pump Design Features
Slurry Pump wet parts are made of wear-resistant high chromium alloy.
Slurry Pump bearing assembly use cylindrical structure, adjusting the space between impeller and front liner easily. They can be removed completely when being repaired. Bearing assembly use grease lubrication. International famous bearing
The shaft seal could use the packing seal, expeller seal and mechanical seal for all slurry pump.
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications at its working site.
There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
pump are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density .
Detailed specification:
1. Horizontal, cantilevered, centrifugal, single stage slurry pump.
2.Long bearing life: The bearing assembly is with large diameter shaft and short overhang.
3. Wear resistant and anti abrasion wet parts: High chrome alloy and rubber etc. They are completely interchangeable with each other.
4. Easily replaceable liners: Liners are bolted to the casing.
5. Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing housing.
6 Discharge direction can be positioned at intervals of 45 degrees.
7. Simple maintenance throat bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple.
8. Sealing type: pcking seal,impeller sealing and mechanical seal.
9. Widely application: They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.
10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping medium concentration slurries.
The 10x8E-M slurry pump applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
10/8 E-M Slurry Pumps Applications: Iron Ore Dressing Plant, Copper Concentration Plant, Gold Mine Concentration Plant, Molybdenum Concentration Plant, Potash Fertilizer Plant, Other Mineral Processing Plants, Alumina Industry, Coal Washery, Power Plant, Sand Excavation, Building Material Industry, Chemical Industries, Other industries.
Pump Design Features
Modular design for ease of maintenance.
Medium duty one piece frame base with lifting points for easy maintenance.
Standard ductile iron outer casings for higher working pressures and incorporating lifting points.
Standard or advanced bearing assembly improves reliability to extend bearing life reduce lubrication costs.
Shaft sealing for increased reliability, stuffing box, expeller, elevated seal or mechanical seal options available.
Standard or advanced impeller design options available.
Allows ease of fitting multiple liner materials, including hard metal, thick section rubber or polyurethane.
Single piece sleeve for stuffing box sealing, lowers stock holding and maintenance.
Multi-purpose design allows for reduced inventory requirements and interchangeability.
Belt guards allows for ease of maintenance and inspection of belt condition.
Tobee THH3/2D slurry pump is 100% interchangeable with 3/2D-HH high head slurry pump, the HH slurry pump is made from wear ressitance material (high-chrome), which the wear-life is same as the original HH slurry pumps.
3x2D-HH high pressure along with sturdier wear parts makes these pumps of the most rugged. Extensive exterior ribbing allows for higher heads to be reached with a single pump, and bulked up wet end parts handle the toughest applications in the field today.
Design Features
1. Ductile iron fully lined casing provides durability, strength and long service life.
2. Multi-stage high pressure operation to 750 psi.
3. Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
4. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
5. Large, open internal passages designed to maximize wear life and lower operating costs.
6. Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life.
7. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Tobee�® THH3/2D slurry pumps are designed for handling highly abrasive, high density slurries in metallurgy industry, mining industry, coal, power, chemical, building material and other industrial departments. The pumps of these models also can be installed as multi-stage series.
4x3C-TH Slurry Pump is engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications, The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping, It is widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry.
Design Features:
â?? The 4x3 C TH slurry pump frame plates have replaceable wear-resistant metal liners, impellers & volute liners are made of wear-resistant metal(such as A05, A49,and other high chrome metal).
â?? The 4x3 C TH slurry pump bearing assembly use cylindrical structure, adjusting the space between impeller& front liner easily, being removed completely when being repaired. Grease lubrication.
â?? The 4x3 C TH slurry pump shaft seal could use the packing seal, expeller seal and mechanical seal. One pump also can be use packing seal with expeller seal together.
â?? The discharge outlet can be positioned at intervals of 45 degrees by request and oriented to any 8 positions to suit installations and applications.
â?? The 4x3 C TH slurry pump can be installed in multistage series to meet the delivery for long distance.
â?? The 4x3 C TH slurry pump drive types, such as direct coupling drive (DC), V belt drive (CR, CV, ZV) etc.
