Single Gas Detector
A single-gas detector is a device that detects the presence of any gas within an area, usually as part of a safety system. This type of Single-Gas Detector Equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down. A gas detector can also alert operators in the vicinity of the leak, allowing them to leave the area.
We supply an immense choice of gas finders and screens for various applications like oxygen, combustible gases, and carbon monoxide. The gas detector adopts an embedded MCU controller detector adopts and is easy to operate,
These units can be provided with sensors to recognize the most well-known gases as well as a scope of more extraordinary gases for changing applications. VS-70 xx portable gas detector locators are additionally accessible with a PID sensor to identify the presence of volatile natural compounds and with infrared IR sensors for the estimation of CO2 and other combustible gases.
FEATURES :
Single gas detector individually we can provide gas detectors for the following gases:
Oxygen
Combustible Gases
LPG
Hexane
Hydrogen
Carbon Monoxide
Hydrogen Sulphide
Chlorine
Sulfur Dioxide
Ammonia
Hydrogen Chloride
Hydrogen
Nitric Oxide
Nitrogen Dioxide
Ethylene
Phosphine
Phosgene
Ozone And Many More
top-quality dust control systems for industries worldwide. Back Scattered dust monitor for accurate measurement of opacity and smoke levels in industrial combustion or air filtration exhaust gases.
The Dew Point Transmitter from Instruments is the best measurement tool for continuous dew point measurement. The dew guidance estimation is accurate down to -60 C Td (76 F Td).
Dew point Transmitter
Instruments' Dew Point Transmitter is the ideal measurement device for continuous dew point measurement. It has a precise dew point estimation down to -60 C Td (-76 F Td).
The Dew Point Transmitter utilizes microprocessor-based circuitry to convert sensor signals using psychometric equations. The device is assembled in a rugged handheld IP-65 body with quick-disconnect tubing couplings.
The device also has an internal sensor manifold for accurate dew point measurement and uses an RS485 interface (Modbus RTU). The device is equipped with a dedicated input to maintain line pressure.
The powerful metal encasing (Aluminum or Treated steel) ensures extreme durability of the device.
FEATURES :
Analog output 4-20 mA for dew point
Condensation insensitive
Fast adjustment time
Pressure resistant up to 350 bar(special version)
RS485 RTU interface
The higher resolution of the sensor signal history graphical data
Sensor diagnosis is on-site with a mobile device.
Readable via Modbus:
Pressure dew point
Temperature
Rel. humidity
Moisture content V / V
Vehicle Emission Monitor
Vehicle Emission Monitor is a product designed on the basis of customized sensor technology for variable gases that are emitted from the exhaust of gasoline and diesel vehicles. It is used to measure the concentration of exhaust gases discharged by vehicle engines including CO, CO2, HC, 02, etc. Our company developed the automobile exhaust gas tester in accordance with the national standards of ARAI (AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA). Designed products are divided into automotive exhaust gas testers for transient and steady-state testing of gasoline and diesel vehicles, respectively.
APPLICATION AREA
Road inspections and random inspections
Protection department's transportation department.
A quick inspection of the automobile annual inspection test line and
Exhaust purification device.
Automotive exhausts research in teaching and research units.
Automotive manufacturing industry and automotive repair 4S shops.
INSTALLATION CONDITIONS
Install in a location that meets the following installation conditions.
The equipment is properly grounded. There is no strong magnetic field generated by heat sources or electrical appliances near the installation site (such as motors, or transformers)
If possible, the equipment is qualified for leak detection.
FEATURES :
Developed on the Android platform, with good human-computer interaction and intelligent control
Rich interfaces, can be connected to oil temperature, speed ambient temperature, humidity, pressure, and other parameters.
Instruments designed the best PUC monitor, for Emission control systems in automobiles and are employed to limit the discharge of noxious gases from the internal-combustion engine and other components.
Vasthi's VT-60 fixed gas detection device provides 24/7 protection for your entire industrial area. It can also be connected to a detection system that displays the gas concentration numerically and triggers an alarm if the value is abnormal.
Gas detectors are one of the most important devices to keep industrial sites safe. Gas leaks in a busy industrial environment can easily turn into a disaster. Many types of gas sensors are available at Vasthi Instruments to monitor and alert personnel in the event of a gas leak. A fixed gas detector is highly recommended to monitor the air quality of the industrial environment.
Why do you need gas detection instruments?
Various types of toxic and flammable gases are constantly used in the industrial part of the process. It is a common sight to see the "EX" mark in many places in any industrial environment. The EX symbol means "explosive areas," and additional safety measures must be followed to protect these areas from fire. In addition, the use of various toxic and flammable gases such as carbon monoxide (CO), hydrogen sulfide (H2S), phosphine (PH3), nitrogen oxides (NOx), and ethylene oxide (ETO) is common in many industries.
Despite being extremely careful while handling these gases, the possibility of leaks is unavoidable. Gas detectors with fixed sensors are very efficient at monitoring industrial areas for potential gas leaks. LEL gas detectors are great tools for identifying harmful gas leaks and alerting personnel with alarms before it's too late.
Vasthi VT-60 fixed gas detectors, are installed in high-priority areas to monitor gas levels 24/7. VT-60 fixed gas detectors operate on electrochemical and catalytic principles for the accurate detection of toxic and flammable gases in industrial areas.
The VT-60 fixed gas detector is optimized to flawlessly detect every flammable and toxic gas leak that can potentially jeopardize industrial zone safety.
Detection principle: The system provides 24V standard DC voltage to the external detector, collecting a standard (4â??20) mA input signal to analyze and complete the display alarm operation.
Suitable for: This fixed gas detector can be connected to the control panel, alarm information would be displayed in the control panel by uploading 485 or currency signal. Gas technical parameter settings are shown in the table. (For reference only, users can set parameters according to specific conditions.)
Contact Us
ð??? www.vasthi.com
ð??§info@vasthi.com
ð???+91-9581678685
Service No:+91-6302677968
Location: https://g.page/r/CZ7cOuetFK9wEAE
The Portable Dew Point Meter has an operating pressure range of up to 20 bar and a moisture measuring range of 0 to 23000 PPM. Instruments is the best choice for monitoring dew point temperatures between-110 C and 30 C.
the world best manufacturer of hydrogen-purity gas analyzers. TCD sensor technology is used in Instruments H2 gas monitors to accurately measure hydrogen gas purity levels in the container.
Instruments designed faultless dew point measurement instruments with a measuring range of -100 C to 30 C. Our dew point meters comply with parameters set by the International Organization for Standardization (ISO).
Instruments provide a wide range of best-in-class portable flue gas analyzers and VOC monitors. Ideal to monitor exhaust emissions like CO2, O2, N2, H2O, and VOC emissions.
Online Hydrogen Purity Analyzer
The online hydrogen purity analyzer uses sensors based on a reliable and stable thermal conductivity concept that provides high sensitivity and accurate analysis of two-phase gases. It is designed in such a way as to monitor hydrogen purity in the generator and gas purity in the generator during the gas replacement process.
With a rich external control port, users can freely choose and easily set the form of a plug-in transmitter or access port. On-site inspections and alarms are available. The system has integrated sound and light alarms and provides a relay that is normally open to the control terminal.
About Tri-Gas Analyzer
The Tri-Gas Analyzer Are Designed Specifically For Monitoring H2 Purity In The H2 Feed To A Power Generator And To Monitor The Purging Procedure During Shut Down. The Analyzer Can Measure The Following Gases By Switch Selection: Range 1: 0-100.0% H2 In Air; Range 2 : 0-100.0% H2 In CO2; Range 3 : 0-100.0% Air In CO2. A 4-20 MA Output Is Provided For The Range Of 85-100% H2 In Air, Along With Two Gas Alarms And A Sensor Fail Alarm.
Tri-Gas Analyzer Applications:
For Continuous Analysis Of Hydrogen Purity And For Purge Monitoring Of Hydrogen-Cooled Generators And Synchronous Converters.
FEATURES :
Easy to setup
The interface is simple and easy to operate
Adjustable high and low alarm value without any hassle
Free maintenance with no consumables
Power consumption is low
Self-adjustment function
Explosive proof housing
Password management to prevent incorrect operation
More than 1% improved refinery hydrogen management system
A portable dew point meter by Vasthi Instruments is a hand-held, lightweight, portable, and affordable dew point meter that is an easy-to-carry, battery-operated measuring tool. The portable dew point meter has an operating pressure of up to 20 bar and a moisture measuring range of 0-23000 ppm. The device has an incredible battery life, up to 20 hours on a single charge. The instrument is assembled in a rugged handheld IP65-protected plastic enclosure and equipped with quick-disconnect tubing couplings and an internal sensor manifold.
FEATURES :
Microprocessor-based portable battery-operated instrument.
Digital Graphical Display Measuring range -100 to +30C dew point Et other ranges also available on client requirement
Samples compressed air up to 12 Kg/cm.
Pressure and up to 95C temperature can be measured directly.
Quick disconnect fitting, desiccant test.
Handy and lightweight.
Inbuilt thin film water vapor sensor.
Optional RS 232 computer interface & data logger.
Ordering information with RANGES
Model VD42-H2
Measuring Range: -40C to +30C
Model â?? VD62-H2
Measuring Range: -60C to +30C
Model â?? VD82-H2
Measuring Range: -80 C to +30 C
Model â?? VD92-H2
Measuring Range: -110 C to +30 C
Tools for measuring dew point temperature and relative humidity (%RH) in compressed air or gas with faultless accuracy. Proper temperature and humidity measurements in compressed air and gases depend on the choice of the appropriate measuring device.
The Series Online Dew Point Meter is a microcontroller-based precision instrument to help ensure the optimum operation of drying equipment.
An online dew point meter by Instruments is ideal for precise monitoring of dew point temperatures(C Td) in air/gas output from dryer systems and processes. embedded with micro-controller-based circuits to give a direct read-out in dew point (C Td) or other units corresponding to sensor output based on psychometric equations. To achieve high accuracy, it uses temperature compensation over the complete operational range.
Industrial Fixed gas monitors to ensure continuous monitoring of all toxic and flammable gases. Choose from a wide range of portable gas monitors to detect single and multiple gases with faultless accuracy.
