1.Gear ratio: motors are available with any one of the following standard gear reduction ratios of 10, 30, 100, 300, 1000, 3000. (basic rotor speed is 2500 rpm).
2. Windings: motor windings are designated by means of two letters. First letter refers to the voltage to the reference phase and the second letter to the voltage on the control phase. The letter code for voltages is as follows: a = 230v, b = 115v, c = 115-0-115v, d = 23v, e = 11.5, f = 11.5-0-11.5.
Standard cotton box or as per customer requirement.
1.Sometimes more than one receiver can be driven from one transmitter for remote indication at more than one place.
2.Transmission is self synchronizing, i.E., the receiver rotor will align itself to the correct position as soon as power is switched on.
3.Neither the receiver nor the transmitter have any mechanical stops and can go through any number of revolutions.
Cotton box.
1.Inherently a digital device, number of pulses determine distance, frequency sets the speed.
2.Drift free.
3.The step angle error is very small and non-cumulative.
4.Rapid response to starting, stopping, and reversing.
5.Brushless design for reliability, simplicity.
6.High torque per package size.
7.Stable at zero speed.
8.Holding torque at standstill.
9.Can be stalled repeatedly and indefinitely without damage.
10.No extra feedback components required (encoders can be added for additional advantages).
11.Bidirectional operation.
Standard cotton box.
Operable with line voltage or low voltage motors.
Stroke fixed at 900, 1600, or 2700 (also field adjustable).
Models for two-position (on-off) control, fitted with feed back potentiometer and proportional control in conjunction with extend control can be supplied.
Rated for -400c to 550c.
Available with internal cam adjusted auxiliary switches .
Cotton box.
1.Supply voltage: ac, single phase, 230v, 50hz.
2.Power consumption: 20 watts.
3.Stroke: factory set at 900, 1600 or 2700. (field adjustment in steps of 30 is possible).
4.Auxiliary switch (optional): 2.5a, 250v, 50hz, no or nc. (operated at only one fixed point).
5.Feedback potentiometer: 135Ω standard matched to stroke angle of either 900, 1600 or 2700. (the maximum permitted power dissipation is 1w for 900, 1.5w for 1600, & 2w for 2700).
6.Torque-speed capabilities: total gear ratio is adjusted at factory to obtain the following combination of torque and speed.
Standard cotton box
