Vertical Hollow Shaft motor IEC and NEMA Structures
Model /Type: VHS280-6-4
Vertical Hollow Shaft Motor
200Hp 440V 60HZ
Model / Type: VHS 445TP-4-200S
VHS Motors
NEMA Premium Efficient Vertical Hollow-shaft Motors
VHS445TP-4-200S Extra Downthrust: 9800(Lb) 1500RPM
VHS IP55 TEFC 380 VOLT 50 HZ;With TERMINAL BOX
SERVICE FACTOR 1.15;PT 100 2 SETS OF 3 ELEMENTS
MAIN TERMINAL BOX HEATER GUIDE BEARING PT 100 MOTOR HEATER
TRUST BEARING PT 100 DIAL SCALE,IP55 TEFC,Top cover red,Body Grey color Working altitude 1500mï¼?NSK or SKF bearing Included heaters,
ZZJ-800 DC Motor
ZZJ-800 series motor is a DC motor for metallurgical lifting, suitable for rolling mills, cranes, elevators and electric shovels.
Structure:
1. The base adopts a thin-plate polygonal lamination structure, small size and light weight. The stator and rotor are treated with vacuum pressure paint (VPI), with good insulation and electrical conductivity.
2. Standard rated voltage: 220V, 440V.
3. Rated speed: 1025, 900, 800, 725, 650, 550r / min, etc.
4. Protection features: IP23S, IP44.
5. Installation method: IC01, IC06, IC17, IC37 and ICW37A86
6. Insulation class: Class F
7. The data listed in the technical data table should be under the following conditions;
a. The altitude does not exceed 1000 meters;
b. The ambient air temperature is between -30 â?? and 40 â??;
c. The working environment should be free of acidic, alkaline or other gases that have a corrosive effect on the insulation; there should be no explosive or flammable gases.
d. Continuous working system: SI; S2; S3.
Plz check the link for more details.
Vertical Hollow Shaft Motor
150Hp 380/660V 50Hz
Type/Model: VHS280-1-4
AC Motor
1800KW IP65 6KV 50HZ
990RPM IC611
DC Motor
Z4-112/4-2
5.5KW, 1750, Insulation Class F, Duty Type S1
Exciting Voltage 300V
Power : 100HP-1000HP; 1200HP-5000HP,10MW-100MW.
YL series 6KV, 10kV medium and large high-voltage vertical three-phase asynchronous motors (hereinafter referred to as motors) are our company using domestic and foreign advanced technology, combined with our company's decades of practical experience in producing high-voltage motors, in accordance with international standards, national standards and industries A series of optimized products developed as standard. It can also be treated by anti-corrosion and anti-mildew technology to derive outdoor (W) and outdoor anti-corrosion (WF) motors. This series of motors can be used directly on 10kV power grids, which has the advantages of simplifying equipment, saving investment, reducing energy consumption and so on.
JK, JS, JR, JS2, JR2, JSL, JRL series medium-sized motors are used to drive a variety of different machinery, such as fans, compressors
Motor model: (JS158-4)
Rated frequency: (50Hz/60HZ)
Rated power: (10KW-680kW-5000KW-100MW)
Rated voltage: (460-6KV-10KV-20KV)
Number of poles: (2-4-18 poles)
Flameproof three-phase asynchronous motors of YB2 series (factory and mining); flameproof three-phase asynchronous motors for mines such as YBS, YBK2, YBF2, YBD2, YBGB2, YBPT, YBJ; Y, YKK, YKS (6KV, 10KV), H355-H800 high-voltage three-phase asynchronous motor; YR, YRKK, YRKS (6KV, 10KV), H355-H710 embedded high-voltage three-phase asynchronous motor; YB H355-H1500 series high-voltage medium-sized flameproof three-phase asynchronous motor 6KV, 10KV); T, TL, TK series synchronous motors and TAW increased safety explosion-proof synchronous motors (6KV, 10KV) and other 50 varieties
Machine seat number: H355-H1500
Power: 160 ï½? 25000Kw
Number of poles: 2-24
Voltage: 690 ï½? 11000V
Frequency: 50HZ, 60HZ
Explosion-proof grade Exe II T1, Exe II T2, Exe II T3
Protection level: IP44, IP54, IP55, IP56
Cooling method: IC511, IC516, IC611, IC616, IC666, IC81W, IC86W
Explosion-proof motor is a type of motor that can be used in flammable and explosive places, and does not generate electric sparks during operation. Explosion-proof motors are mainly used in coal mines, oil and gas, petrochemical and chemical industries. In addition, it is also widely used in textile, metallurgy, urban gas, transportation, grain and oil processing, papermaking, and medicine. Explosion-proof motors are the main power equipment and are usually used to drive pumps, fans, compressors and other transmission machinery.
Power range:1250-2500 kw,2000kw-10000kw,10mw-50mw-100mw.
Rated armature voltage: 660, 750, 850, 950, 1000V,3000V
excitation: Other
Axis height:810 to 1000mm-5000mm
speed: Up to 1000 rpm
Deep well pump motor and water pump work directly: It is suitable for extracting groundwater from deep wells, and can also be used for rivers, reservoirs, canals and other water-lifting projects: mainly used for farmland irrigation and water for humans and livestock in plateau and mountainous areas, as well as cities, factories, railways , Mine, construction site for drainage. Deep well pumps and deep well pump motors with high safety and reliability have also become the first choice
Vertical Hollow Shaft Motor
IEC stand IP23,Class B
30years experience,export 5000pcs VHS motor to USA/MEXICO/Iran per year.
VHS250-3-4,125HP, 90kW
VHS280-1-4, 150HP, 110kW
VHS280-2-4, 175HP, 132kW
VHS280-3-4, 200HP, 150kW
VHS280-4-4, 250HP, 185kW
VHS280-5-4, 270HP, 200kW,
VHS280-6-4 , 300HP, 220kW
WEG W22 200 HP-150kw Poles: 6P
586 / 7TZ 3Ph 460 V 50 Hz IC411 - TEFC
WEG 2.2kw 3hp 3 Phase 6 Pole Mte16a Al Ip55 Al112m
WEG, W22 IE3 7.5 kW 4P 132M 3Ph 380- 415/660 // 460 V 50 Hz
WEG, 3 HP-2.2kw, 1800 RPM, 208-230 / 460V, 182TC FRAME
WEG, 10 HP-7.5kw, 3-Phase, 1760rpm, 208- 230 / 460V, 213 / 5TC Frame
WEG, 10 HP-7.5kw, 1800 RPM, 208-230 / 460V, 215TC FRAME
Capacity: 10kg-10ton-20ton-50ton-60ton max.80t
power max 2000kw,20000kw , 35000kw max
melting steel, alloy,DRI,copper
Induction Heating Furnace
Model: Zps-5500/10
4000KW 1250*6 V, 10t/hr
Rebar Production Line
Role Steel 6mm Production
Steel Bar 12 meter long
Diameter 6mm to 42mm
300Hz, 3700V, 6*1250V
Electrical system: SIEMENS/DELTA Transducer, SIEMENS/DELTA PLC, SCHNEIDER contactor PLC automatic controlling
Billet specification: 100*100,125*125,130*130, 150*150mm
Strand number: strands 2 strands
Dummy bar: rigid dummy bar
Ladle support: Ladle Rotor Tower/Ladle moving car
