Sale Leica Pegasus Backpack
Used condition like new, Excellent and ready to work
Come with warranty 12 month
Manufacture : 2018
The Backpack is built for scanning projects that can be covered on foot and at walking speed. This includes both indoor and outdoor mapping situations, such as buildings that require BIM modeling, traffic-closed urban areas, heritage sites with limited access, unmapped underground infrastructure, mining, and even the building of GIS systems.
It uses GPS for outdoor positioning, and inertial measurement units and SLAM (simultaneous location and measurement) for indoor positioning where GPS signals cut out. This gives it a location accuracy of 5cm to 50cm after ten minutes walking without the use of control points.
With the Leica Pegasus:Backpack outdoor areas or underground infrastructures with limited access professional data collection is no longer limited . By capturing full 360 spherical view and Lidar together means you never forget an object or return to a project site �?�¢?? no matter where you are. A hardware light sensor ensures the operator that all images are usable while other functions are verifiable and adjustable over the operators tablet device.
Main features:
- Indoor and outdoor mapping in one single solution �?�¢?? position agnostic
- Marries imagery and point cloud data into a single calibrated, user-intuitive platform
- Full calibrated spherical view
- External trigger output and external time stamping for additional sensors
- Light sensor for auto brightness and balance control for image capture
- Software enables access to Esri ArcGIS for Desktop
- Capture and edit 3D spatial objects from images and / or within the point cloud
- Economical with data balances data quantity and quality, with project logistics and post-processing
- Ultra light weight carbon fiber core frame with an extensive ergonomic support for prolonged use
- Real time view of the captured data through the tablet device
- Up to 6 hours operational time with optional battery pack
Hardware features:
- Two profilers with 600,000 pts/sec, 50 m usable range and 16 channels
- Largest sensor to pixel in the market 5.5 um x 5.5 um
- Five 4 MB cameras positioned to capture 360x 200 view
- User adjustable acquisition intervals based on the distance travelled
- NovAtel ProPak6 provides the latest and most sophisticated precise GNSS receiver with a robust field proven IMU for position accuracy of 20 mm RMS after 10 seconds of outage
- Marrying a triple band GNSS system with the latest multiple beam enabled SLAM algorithms
- INS determination of the location, speed, velocity and orientation at a rate of 200 Hz
- Ultra portable system fitting into one carrying case (system weight 13 kg)
- Battery based using four batteries in a hot swappable configuration
- Multi-core industrial PC, 1 TB SSD, USB3 interface, ethernet, and wireless connection from the system to the tablet device
Sale EinScan Pro 2X Handheld 3D Scanner Machines
Never Used, condition like new
Come with warranty 12 month
Manufacture : 2019
Features:
The new scanning software EXSCAN PRO offers a brand new user interface and a new workflow. The 3D scanning process is simple for new and experienced users.
- Brand new user interface and workflow
- User-friendly operation
- New operating modes
Allows users to scan faster during operation, and then sets the resolution option during data processing, which improves scanning efficiency.
- Simultaneous data display
- High compatibility
The standard output file formats include STL, OBJ, PLY, ASC, 3MF, and P3
Compatible with most popular software packages in the market.
- Exporting models seamlessly to 3D printers.
- Mesh editing: Provides mesh editing such as cleaning, merging, hole filling, data blending, smoothing, sharpening, etc.
Application:
- For higher efficiency and quality
- Manufacturing & Reverse Engineering
- 3D modeling for customised products
- Services
- Art & Heritage
- Design
- Health service
- Research and education
Include:
- Scanner body
- Power cable
- Power adapter.
Prodim Proliner 8 3D Digital Templating System
Used condition like new, Excellent and ready to work
Come with warranty 12 month
Manufacture : 2018
Includes:
1x 8-CS 3D Digital Templating System
1x Pointer
1x types of scanner (long/short)
1x batteries
1x Battery charger
1x Remote control
1x User guide & interactive CD
1x Bag
Software:
UNFOLD for flattening 3D objects
COUNTERTOP for the manufacture of countertops: measurements, finish, inset panels, and dimension, auto PDF report for CNC-operator.
SURVEY opposite principle, imports DXF file and viaducts in the measured.
Leica ATX900 GG GNSS RTK Base Rover 900 system
Used condition like new and ready to work
Come with warranty 12 month
Manufacture : 2007
includes:
- 2 ATX900 GPS Antenna
- Controller + GPS functionality software
- 2 Satelline 3AS radio modem 458.150 MHz
- 2Hz RTK Update Option GPS900
- GPS900 Y-Cable
- 1.2m cable ATX1230/900 RX1250/900
- 4 Lith-Ion Battery 2Ah Used With RX1200
- 2 Gainflex radio antenna
- Tripod/GFU Adaptor
- Pro Charger & Cable (Req. GDI221/222 Plates)
- 2 Adapter Plate for Charging GEB221/211
- Telescopic Carbon GPS Pole (2m Snap Lock)
- Holder For RX1250/900 and GFU Modem Housing
- Clamp for Holding GHT39/56 Plate on Pole
- Metal Tripod, Telescopic
- Basic Tribrach with Optical Plum. new green
- Carrier with 5/8" screw, GPS antenna
- Height Hook
- NIMH, 12V 8AH large external battery
- 2.8m Data Transfer Cable For RX1250
- Application Reference Line
- Application DTM Stake Out
- Application Volumes
- Shipping Case
- Leica GEB 171 External battery
Applications:
- Setup Reference
- Resection
- measure
- Stakeout
- Reference Line
- volume calculation
- RoadRunner.
- Determine Coordinate System.
- Cogo and routes editor.
Trimble S8 High Precision Robotic Total Station with TSC3 Controller
Used condition Calibrated and ready to work
Come with warranty 12 month
include :
-Trimble S8 High Precision 1" Robotic Total Station with Finelock
-Trimble TSC3
-Charging Kit
-Chargers
-Cables
-Batteries
-Trimax Tripod.
-Trimble Case.
Trimble S6 3 DR 300 Total Station with CU Controller
Used condition like new and ready to work
Come with warranty 12 month.
Manufacturer year : 2013
include :
Total Station :
- S6 Total Station,
- Tribrach,
- 1 x battery,
- target plate,
- hard carry case
Controller
- Trimble CU controller.
- Cradle.
- 1 x battery.
- neck strap.
- data cable.
- pole bracket.
- battery charger (including car charger),
- hard carry case.
Leica TCR805power Total Station
Used condition like new, Excellent and ready to work
Come with warranty 12 month
Manufacture : 2007
Includes:
Leica TCR805 Power Total Station
2 x Leica GEB121 Battery
Leica GKL112 Charger
Leica Type Mini Prism & 4 Extension Poles
Leica GEV189 Data Transfer Cable
Leica GDF121 tribrach
Leica Sunshade
Leica Rainhood
Case.
User manuals for TCR805 and GKL112 charger.
Sale Leica TS30 0.5 Total Station Monitoring Set
Used condition like new and ready to work
Come with warranty 12 month
Manufaturer year : 2011
include :
-Leica TS30 0.5 Total Station
-TS 30 Year built: 2011
-tripod GDF 111
-charger
-2X battery GEB
-charger adapter GKL 221 shells with GDI,
-Manual and RadioHandle
-Precision 360 degree prism!
-RX 1250 Tc.
-Internal software: complete.
-Case.
DESCRIPTIONS:
Buildings and dams settle, bridges flex and vibrate, rock masses shift, mud slides, glaciers flow and volcanoes erupt. Whether by human activity such as mining and construction or by natural processes such as climate change and erosion, the world in which we live is continually changing.
Topcon 3D-MC2 Dozer Grade Control
Used condition like new and ready to work
Come with warranty 12 month
includes:
Topcon 3D Control Box, with Automatics Turned on for Dozer and Motorgrader
Topcon Dual Antenna Mag Box with Glonass and UHF Radio (450-470mhz).
2 Topcon PG-A3 GNSS Antennas with Dual Mount Bracket
2 Topcon Antenna Cables (not shown but will be included)
Topcon Power Coil Cable
Topcon GPS Mast
Carry Cases.
The options currently activated are:
Dozer
Motorgrader
Generic Machine
Topcon RTK GPS
Blade Control
Sensor Input
Firmware Version 3.58
Software Version 6.11.03.
Prodim Proliner 7 3D Digital Templating System
Used condition like new, Excellent and ready to work
Come with warranty 12 month
Manufacture : 2019
Includes:
1x 7-CS 3D Digital Templating System
2x Batteries
1x Battery charger
1x USB receiver
4x Puck
1x Remote control
1x Bag
1x Tripod
Software:
Measure multiple planes.
Check dimensions.
Edit drawings.
Generate CAD files (DXF)
Tangential contour for optimal CNC use.
Application-based industry software and templating apps available.
