Non-pressure solar water heater
The characteristic:
1 Inner tank : stainless steel SUS304-0.5mm
2 Vacuum tube : QB-AL-N/AL-58-1800
3 Out tank : painted steel-0.4mm,aluminum-zinc coated steel--0.45mm,stainless steel SUS304
4 Frame: coated galvanized steel sheet-1.5mm;stainless steel SUS430-1.5mm.
5 The material of insulation:polyurethane 50mm/60mm/65mm
6 The reflector:Aluminum component : Al 99.85% surface oxidation.
G.W 71KG
Solar water heater
1 pressurized inner tank: stainless steel sus304f¼1.2mm
2 vacuum tube: qb-al-n/al-58-1800
3 outer tank: painted steel-0.4 mm, stainless steel sus304-0.4mm
4 frame: coated galvanized steel sheet-1.5mm;stainless steel sus430-1.5mm.
5the material of insulation:polyurethane 55mm
6 the reflector:aluminum component : al 99.85% surface oxidation.
Characteristic:
1 it takes the advantage of the tap waterf+s pressure.More pressure, more comfortable.
2 the water can be heated rapidly, so it can produce the high quality hot water.
3 it can produce more hot water than the general types because it isnf+t restricted by the volume of the tank.
G.W. 89kg
The characteristic:
1 it takes the advantage of the tap waterf+s pressure.More pressure, more comfortable.
2 the water can be heated rapidly, so it can produce the high quality hot water.
3 it can produce more hot water than the general types because it is not restricted by the volume of the tank.
The details of material
1 inner tank : stainless steel sus304-0.6mm
2 vacuum tube : qb-al-n/al-58-2000
3 out tank : painted steel-0.4mm, stainless steel sus304-0.4mm
4 frame: coated galvanized steel sheet-1.5mm;stainless steel sus430-1.5mm.
5 the material of insulation:polyurethane 50mm
6 the reflector:aluminum component : al 99.85% surface oxidation.
7 copper coil : ft12mm, thickness 0.8mm.
G.W. 176kg
Pressurized solar water heater
The characteristic:
1 inner tank : stainless steel sus316l-1.2mm
2vacuum tube : qb-al-n/al-47-1500
3 out tank : painted steel-0.4mm, stainless steel sus304-0.4mm
4 frame: coated galvanized steel sheet-1.5mm;stainless steel sus430-1.5mm.
5the material of insulation:polyurethane 55mm
6 the reflector:aluminum component : al 99.85% surface oxidation.
Characteristic:
1 this type of solar water heater works with high pressure, so do the water it prodeces.
2 it uses the heat pipe to delivery the heat energy, it can works rapidly.
3 because of no water in the vacuum tube , so there will not tube breakage in the winter.
4 each vacuum tubes can work alone, so it can still operate in the event of occasional tube breakage.
G.W. 90kg
Solar collector
The characteristic:
1 the vacuum tubes absorb the solar energy and transfer into the heat energy, then pass it to the u pipe, it can get high temperature.
2 there is no water in the vacuum tube, so the tube will not break in the winter.
3 it is steady and credible.
4 it can be combined with the architecture perfectly.
5 it can be combined with existing pipeline.
6 it can still operate in the event of occasional tube breakages.
The details of material:
Outer tank: alnico 1.5mm
Manifold: 22mm thickness 2mm
U copper type: 8mm thickness 0.6mm
G.W. 50.6kg
Solar collector
The characteristic:
1 The water is heated by the heat pipe rapidly.
2 There is no water in the vacuum tube,so the tube will not break in the winter.
3 It can be combined with the architecture perfectly.
4 It can be combined with existing pipeline.
5 It will be affected by the local water quality,it doesnf+t suit hard water.
6 It can still operate in the event of occasional tube breakages.
The details of material
Outer tank: Alnicof¼1.5mm
Manifold:fT22mm thickness 2mm
g.w. 77.1kg
Split pressurized water tank
The characteristic:
1 it can make the water temperature to different level and not hot the top water instantly.The special structure can reduce the cold and hot water to mix together.
2 the tank inside the building , the connection pipe between the tank and water tap is very short, so that hot water can be used instantly and seldom cold water flows out.
3 the tank inside the building, the hot water lose less energy than the normal one.
4 the heater collector and the water tank is peparated, that makes the system combine with the building perfectly, which will bot reduce the sightseeing for the building and the environment around.
5 back up with electric heater so that in the day without sunshine hot water can also be used.
6 capacity :100l, 150l, 200l, 300l
Details for the material:
Inner tank:stainless steel sus316-1.2mm/porcelain inner tank
Outer tank:pained steel-0.4mm/stainless steel-0.4mm
Insulation:polyurethane
100l, 150l, 200l, 300l
