With coat-hanger channel design, The upper die lip is micro adjustable;lower die lip can adjusting product thickness and 45 degree blocking bar . Products of conventional width is 1400mm,1700mm. Thickness range is from 1 to 9 mm..
Using coat-hanger flow design. The upper die lip is full push flexible fine-tuning or push-pull fine-tuning adjusting methodï¼?down die lip is in whole. The width range: 200-1000mm.
1.Different lamination layers and proportion,thus uniformity achieved to meet the multilayer lamination requirement of varied material production .
.
1.Surface layer percentage can be as low as 8%
2.Suitable for different melt point raw material co - extrusion,the max temperature difference can reach 80 (Esoecially suitable for process temperatures differ by more than 20 multilayer coextrusion )
3.Independent temperature control in every layer ,with heat insulation device. 4.With special flow channel design to reduce the edge cutting ,thus to reduce the scraps .
With special coathanger channel design, 90 degree chock bar on the upper die lip ,the lower die lip can change with adjusts the thickness from 2-30mm.
Product Width Below 3000 mm.
Application: Covering almost all polymers such as PP, PE, PC, PMMA, EVA, ABS, PS, PA, PVC, etc.
Product application: Widely used in Electrical appliances, construction, chemical industry, light boxes, advertising decoration, etc.
The upper die lip adopt manual full push flexible fine-tuning /manual push & pull fine-tuning is meeting different product thickness. The die width adjustment is external block type and hook type .The die width is up to 8000 mm
With T -type channel design, The upper die lip adopt push &pull fine-tuning / full push fine-tuning method to cooperates with special Internal deckling and External deckling system to decrease edge , and continuously online adjust the width to better reduce the costs .
1.The Product Width: Below 8000 mm .
2.Width Adjustment : Internal sealing adjustment ; External sealing adjustment ;Double seal adjustment (Double protection to prevent leakage of material). Application: CPP, CPE, PP, PE, EVA, LDPE, ect.
Product Application: Food, packaging, pharmaceuticals, printing office industry; other flexible packaging materials, etc.
Fast Screen Changer specifications: 30-500MM
Singer Plate type duplex working position fast screen changer
Double Plate type quadruple working position fast screen changer
Singer Column type duplex working position fast screen changer
Double Column type quadruple working position fast screen changer
With coat-hanger channel design,The Upper lip for the whole push type or push-pull type fine tuning,the lower die lip can adjust product thickness and 45 degree or 90 degree chock bar Meeting the needs of different thickness.
1.Online Width Adjustment: Continuous adjustment of different widths without downtime,
2.The Die width is belower 8000 mm .
Application: PP PE PC PMMA PET EVA ABS PS PA PVC PVB ect.
Product Application: In industrial buildings, computers, mobile phones, automotive, aerospace and other fields have a wide range of applications
With special Coat-hanger channel design ,the upper die lip can adjust product thickness,the one of lower die lip with 90 degree restrictor bar,meeting different product thickness.
The New design , the upper and lower die lip a whole ,without restrictor bar.1.Product thickness :3-25 MM
2.Special die lip design is suitable for various material of foam products
3.Special die lip temperature control device, ensure composite production requirements of different foaming ratio products
With special coat-hanger channel design, Upper die lip with 90 degree restrictor bar adjusts the thickness, the lower die lip is integration . Can be maximally reduce heat sensitive stream ablation in the extrusion process.
1.Adopts special design flow equipped with 2- layers Feedblock can produce better double layer sheet , and make sure more smooth surface.
2. Normal model is 1350 mm, the width is unchangeable. Customization for special specification and requirement is available.
With special Coat-hanger channel design , ,with 90 degree restrictor bar one of the upper and lower lip,. Die lip using special tooth design to product approval meeting customer requirement .Thickness is 2mm,Or according customer requirement .
With special coat-hanger channel design, Upper die lip with 90 degree restrictor bar adjusts the thickness, the lower die lip is integration . Can be maximally reduce heat sensitive streamâ??s ablation in the extrusion process.
1.Adopts special design flow equipped with 2- layers Feedblock can produce better double layer sheet , and make sure more smooth surface.
2.Normal model is 1350 mm, the width is unchangeable. Customization for special specification and requirement is available.
The upper die lip can fine-adjust With 45 degree Restrictor bar ,lower die lip can change . It can produce different materials, different thickness of the products .Suitable for the thickness between 1-10mm, the width of the product is below 10000mm.
