Built-in cleaning mode, high-sensitivity water detection, dualwave drive, the control system does not generate heat
Atomization rate: 0.2ml/min about 0.35ml/min
Atomized particles: median particle size 3 um±25%,
The proportion of fog particles with a diameter of less than 5
microns is not less than 60%
Medicine cup capacity: up to 8mL
Noise: 50Db(A)
Nominal frequency: 108kHz
Residual liquid volume: 0.5ml
Power supply: 2 AA batteries or DC5V power supply
Working power: about 0.65W (5V/130mA)
Working time: no less than 1 hour (using two new AA batteries)
Net weight: about 100.8g (without batteries)
Size: 125mm*47mm*41mm
Dry battery/lithium battery (optional)
Built-in cleaning mode, high-sensitivity water detection, dualwave drive, the control system does not generate heat
Atomization rate: 0.2ml/min about 0.35ml/min
Atomized particles: median particle size 3 um±25%,
The proportion of mist particles with a diameter of less than 5
microns is not less than 60%. Medicine cup capacity: maximum
8mL
Noise: 50Db(A)
Nominal frequency: 108kHz
Residual liquid volume: 0.5ml
Power supply: 2 AA batteries or DC5V power supply
Working power: about 0.65W (5V/130mA)
Working time: no less than 1 hour (using two new AA batteries)
Net weight: about 110g (without battery)
Size: 114mm*41mm*64mm
Dry battery/lithium battery (optional)
Built-in cleaning mode, high-sensitivity water detection, dualwave drive, the control system does not generate heat
Atomization rate: 0.2ml/min about 0.35ml/min
Atomized particles: median particle size 3 um±25%,
The proportion of fog particles with a diameter of less than 5
microns is not less than 60%
Medicine cup capacity: up to 8mL
Noise: 50Db(A)
Nominal frequency: 108kHz
Residual liquid volume: 0.5ml
Working power: about 0.65W (5V/130mA)
Net weight: about 173.4g
Size: 124.4mm*51.6mm*54.5mm
Power supply: AC220V50Hz
Machine noise: 70dB (A-weighting)
Power adapter: 12V
Output power: 20VA
Atomization rate: >0.2mL/min
Residual liquid volume: 2mL
Gas flow: 5L/min
Bodyweight: Approximately 255 g
Under normal working conditions, the maximum pressure
generated by the atomizer should be in the range of 60kPa-
130kPa. When the host is abnormal, the maximum pressure
generated by the atomizer should be in the range of 150kPa-
400kPa, and the tube body should not be ruptured.
Equivalent volume particle size distribution: the proportion of
fog particles 55%
Median particle: The median particle size of the fog particles is
2.5um, and the error should not exceed ±25%
Pressure range
1. Under normal working conditions, the pressure range of the device is 60kPa 130kPa.
2. When the pipeline blockage occurs etc. in the device, the pressure produced by the device will not break in the range of 130kPa ~ 400kPa
3. Residual liquid volume 0.7mL
4. Machine noise Noise of machine in normal operation: 65dB
(frequency-weighting characteristic A).
5. Enclosure leakage current Normal condition 0.1mA; Single
fault condition 0.5mA
6. Patient leakage current Normal condition 0.1mA; Single fault
condition 0.5mA.
7. Droplet particle size 1um-5um
Pressure range
1. Under normal working conditions, the pressure range of the device is 60kPa 130kPa.
2. When the pipeline blockage occurs etc. in the device, the pressure produced by the device will not break in the range of 130kPa ~ 400kPa
3. Residual liquid volume 0.7mL
4. Machine noise Noise of machine in normal operation: 65dB (frequency-weighting characteristic A).
5. Enclosure leakage current Normal condition 0.1mA; Single fault condition 0.5mA
6. Patient leakage current Normal condition 0.1mA; Single fault condition 0.5mA.
7. Droplet particle size 1um-5um
Pressure range
1. Under normal working conditions, the pressure range of the device is 60kPa 130kPa.
2. When the pipeline blockage occurs etc. in the device, the pressure produced by the device will not break in the range of 130kPa ~ 400kPa
3. Residual liquid volume 0.7mL
4. Machine noise Noise of machine in normal operation: 65dB (frequency-weighting characteristic A).
5. Enclosure leakage current Normal condition 0.1mA; Single fault condition 0.5mA
6. Patient leakage current Normal condition 0.1mA; Single fault condition 0.5mA.
7. Droplet particle size 1um-5um
Power supply: Input: AC100-240V, 50/60Hz
Output: DC12V, 1500Ma
Maximum atomization rate: 0.2mL/min
The residual amount of liquid medicine: 1.0MI
The median diameter of mist particles (MMD): 3.9um ±25%
Fuse tube T2A/250V 3.6X10
Compression pump free flow: 3.5L/min
Noise: 60dB(A)
Input power: 35VA
Net weight: about 730g (main unit only)
Size: 150mm*150mm*90mm"
Power 130VA
Operation Environment
Temperature: 5 40.
Relative humidity: 80%.
Atmosphere pressure: 80.0kPa 106.0kPa
Spray rate:The spray rate should be 0.2mL/min.
Airflow volume: Compressed airflow of compression pump:
8L/min.
transport and storage: 93%
Pressure range
1. Under normal working conditions, the pressure range of the device is 60kPa 130kPa.
2. When the pipeline blockage occurs etc. in the device, the pressure produced by the device will not break in the range of 130kPa ~ 400kPa
3. Residual liquid volume 0.7mL
4. Machine noise Noise of machine in normal operation: 65dB (frequency-weighting characteristic A).
5. Enclosure leakage current Normal condition 0.1mA; Single fault condition 0.5mA
6. Patient leakage current Normal condition 0.1mA; Single fault condition 0.5mA.
7. Droplet particle size 1um-5um
Pressure range
1. Under normal working conditions, the pressure range of the device is 60kPa 130kPa.
2. When the pipeline blockage occurs etc. in the device, the pressure produced by the device will not break in the range of 130kPa ~ 400kPa
3. Residual liquid volume 0.7mL
4. Machine noise Noise of machine in normal operation: 65dB (frequency-weighting characteristic A).
5. Enclosure leakage current Normal condition 0.1mA; Single fault condition 0.5mA
6. Patient leakage current Normal condition 0.1mA; Single fault condition 0.5mA.
7. Droplet particle size 1um-5um