Material Fused Silica
Lens Diameter 13.8mm ±0.1mm
Edge Thickness 1.5mm ±0.1mm
Laser type 1064nm (BBAR 1020nm-1080nm)
Optical Coating Both sides AR/AR@1064nm(1020nm-1080nm)
Application YAG/Fiber laser cutting/welding/Cladding machines
Laser power 500w-6000w
The Precitec laser cutting copper nozzle can assist the gas to eject rapidly, which can effectively prevent the debris from falling upward and thus protect the focusing mirror. At the same time, it controls the diffusion area and size of the gas, thus affecting the cutting quality of the laser cutting machine.
Single nozzle is used for melting cutting, that is, nitrogen is used as auxiliary gas to cut stainless steel and aluminum plate.
Double nozzles are commonly used for cutting oxygen, which uses oxygen as an auxiliary gas for cutting carbon steel.
Advantage:
Advantage:
1. Made of high quality copper material, can provide stable signal transmission.
2. High processing precision, high light inside the stack surface, airflow barrier through, less slag, no burrs, cutting easily.
3. The strict oxidation prevention process, copper bright, smooth surface, can effectively prolong the use of time.
4. Suitable for market mainstream brands, such as PRECITEC, Han, laser, Wan Shunxing, Jin Yun, Dican, Hong Shan, Jia Qiang, Chutian, thunder, high energy and other fiber laser cutting head.
At the same time, the choice of the nozzle aperture size will vary according to the thickness of the cutting material.
1.Cutting thin plate (3mm below): choose diameter 1mm aperture nozzle, cutting effect will be relatively fine, and choose diameter 1.5mm aperture of nozzle will be thicker, and the corner of the place will be easier to stain.
2.Cutting plate (above 3mm): choose to use 1mm when the diameter of the nozzle aperture is not stable, because the cutting power is higher, the relative cooling time is longer, the relative cutting time increases, with 1mm aperture diameter nozzle gas diffusion area is small, so it is not too stable, but basically can still be used. The nozzle with a diameter of 1.5mm diameter has a large gas diffusion area and a slower gas flow rate, so it is stable when cutting.
3.Cutting more than 10mm of the plate. At present, 2mm or 2mm diameter nozzle is usually chosen.
Note: Some 0.8/1.0/1.2/1.4/1.5/1.8/2.0/2.5/3.0/4.0 aperture size, please select need output aperture.
The CINCINNATI lasermech laser nozzles can assist the gas to eject rapidly, which can effectively prevent the debris from falling upward and thus protect the focusing mirror. At the same time, it controls the diffusion area and size of the gas, thus affecting the cutting quality of the laser cutting machine.
Single nozzle is used for melting cutting, that is, nitrogen is used as auxiliary gas to cut stainless steel and aluminum plate.
Double nozzles are commonly used for cutting oxygen, which uses oxygen as an auxiliary gas for cutting carbon steel.
Advantage:
1. Made of high quality copper material, can provide stable signal transmission.
2. High processing precision, high light inside the stack surface, airflow barrier through, less slag, no burrs, cutting easily.
3. The strict oxidation prevention process, copper bright, smooth surface, can effectively prolong the use of time.
4. Suitable for market mainstream brands Amada.
At the same time, the choice of the nozzle aperture size will vary according to the thickness of the cutting material.
1.Cutting thin plate (3mm below): choose diameter 1mm aperture nozzle, cutting effect will be relatively fine, and choose diameter 1.5mm aperture of nozzle will be thicker, and the corner of the place will be easier to stain.
2.Cutting plate (above 3mm): choose to use 1mm when the diameter of the nozzle aperture is not stable, because the cutting power is higher, the relative cooling time is longer, the relative cutting time increases, with 1mm aperture diameter nozzle gas diffusion area is small, so it is not too stable, but basically can still be used. The nozzle with a diameter of 1.5mm diameter has a large gas diffusion area and a slower gas flow rate, so it is stable when cutting.
3.Cutting more than 10mm of the plate. At present, 2mm or 2mm diameter nozzle is usually chosen.
Note: Some 1.0/1.2/1.5/1.8/2.0/2.5/3.0mm aperture size, please select need output aperture.
UJ optics provides Cynosure Lens Focus Lens, Light Age EpiCare Lens, also Candela Lens Candela Focus Lens Candela Focusing Lens.
The surface polishing quality and coating of these lenses are excellent and will work for 755nm and 1064nm or both 755nm &1064nm.
You can also get below items from UJ Optical Element:
Candela Gentle Pro series 7122-00-9655
Candela GentleLase/YAG 15.75mm windows
Candela GentleLase/YAG 16mm windows
Candela GentleMax 18mm windows
Light age epicare focus lens
Lens for Cynosure apogee 5500 laser
Candela S/N 8050-00-9004
Candela S/N 8050-00-1511 lens
Candela S/N 8050-00-2010 PL/CX Lens
Candela S/N 8050-00-1520 Lens
Candela S/N 8050-00-0010 Lens
Candela S/N 8050-00-00-9002 Lens
UJ optics provides Candela Lens Candela Focus Lens Candela Focusing Lens, also Cynosure, Light Age.
The surface polishing quality and coating of these lenses are excellent and will work for 755nm and 1064nm or both 755nm &1064nm.
Yangzhou UJ Optical Element Co.,Ltd. Focus Lens for Candela Cynosure Light Age
Item No. Dia. (mm) EFL (mm) Wavelength (nm)
UJMRD11F20 11 20 AR755&1064
UJMRD12F15
12 15 AR755&1064
UJMRD12F24 12 24 AR755&1064
UJMRD12F25 12 25 AR755&1064
UJMRD12F36 12 36 AR755&1064
UJMRD12.7F15 12.7 15 AR755&1064
UJMRD12.7F20 12.7 20 AR755&1064
UJMRD12.7F30 12.7 30 AR755&1064
UJMRD12.7F40 12.7 40 AR755&1064
UJMRD15F20 15 20 AR755&1064
UJMRD15F25 15 25 AR755&1064
UJMRD15F40 15 40 AR755&1064
UJMRD18F30 18 30 AR755&1064
UJMRD18F36 18 36 AR755&1064
UJMRD25.4F35 25.4 35 AR755&1064
UJMRD25.4F40 25.4 40 AR755&1064
UJMRD25.4F50 25.4 50 AR755&1064
UJMRD25.4F50.8 25.4 50.8 AR755&1064
UJMRD25.4F63.5 25.4 63.5 AR755&1064
Other Diameters and Focal Lengths can also be made for you. Please contact us.
Laser manufacturers use the focus lens in order to adjust the size of the laser so it can travel from the laser head, to the fiberoptic, the handpiece and finally reach the patientâ??s skin. It is very important that the focus lens are spotlessly clean, free of dust and scratches. Dust and scratches on their surface will cause the laser to burn them gradually, prevent full laser emission, and can misdirect part of the laser, which can cause other components to be burned. We strongly recommend keeping the focus lens in good condition. Additionally, keep your work area spotlessly clean in order to avoid dust particles which can be detrimental to aesthetic laser equipment.
These are premium and quality custom made focus lenses that are made exactly by the manufacturers requirements. These focus lenses have been applied with AR coating to achieve optimum durability and transmitting of the laser beam. This will create better treatment results and allow your machine to be more time efficient.
UJ optics provides Candela Lens Candela Focus Lens Candela Focusing Lens, also Cynosure, Light Age.
The surface polishing quality and coating of these lenses are excellent and will work for 755nm and 1064nm or both 755nm &1064nm.
Yangzhou UJ Optical Element Co.,Ltd. Focus Lens for Candela Cynosure Light Age
Item No. Dia. (mm) EFL (mm) Wavelength (nm)
UJMRD11F20 11 20 AR755&1064
UJMRD12F15
12 15 AR755&1064
UJMRD12F24 12 24 AR755&1064
UJMRD12F25 12 25 AR755&1064
UJMRD12F36 12 36 AR755&1064
UJMRD12.7F15 12.7 15 AR755&1064
UJMRD12.7F20 12.7 20 AR755&1064
UJMRD12.7F30 12.7 30 AR755&1064
UJMRD12.7F40 12.7 40 AR755&1064
UJMRD15F20 15 20 AR755&1064
UJMRD15F25 15 25 AR755&1064
UJMRD15F40 15 40 AR755&1064
UJMRD18F30 18 30 AR755&1064
UJMRD18F36 18 36 AR755&1064
UJMRD25.4F35 25.4 35 AR755&1064
UJMRD25.4F40 25.4 40 AR755&1064
UJMRD25.4F50 25.4 50 AR755&1064
UJMRD25.4F50.8 25.4 50.8 AR755&1064
Other Diameters and Focal Lengths can also be made for you. Please contact us.
UJ optics provides Cynosure Lens Focus Lens, Light Age EpiCare Lens, also Candela Lens Candela Focus Lens Candela Focusing Lens.
The surface polishing quality and coating of these lenses are excellent and will work for 755nm and 1064nm or both 755nm &1064nm.
Yangzhou UJ Optical Element Co.,Ltd. Focus Lens for Candela Cynosure Light Age
Item No. Dia. (mm) EFL (mm) Wavelength (nm)
UJMRD11F20 11 20 AR755&1064
UJMRD12F15
12 15 AR755&1064
UJMRD12F24 12 24 AR755&1064
UJMRD12F25 12 25 AR755&1064
UJMRD12F36 12 36 AR755&1064
UJMRD12.7F15 12.7 15 AR755&1064
UJMRD12.7F20 12.7 20 AR755&1064
UJMRD12.7F30 12.7 30 AR755&1064
UJMRD12.7F40 12.7 40 AR755&1064
UJMRD15F20 15 20 AR755&1064
UJMRD15F25 15 25 AR755&1064
UJMRD15F40 15 40 AR755&1064
UJMRD18F30 18 30 AR755&1064
UJMRD18F36 18 36 AR755&1064
UJMRD25.4F35 25.4 35 AR755&1064
UJMRD25.4F40 25.4 40 AR755&1064
UJMRD25.4F50 25.4 50 AR755&1064
UJMRD25.4F50.8 25.4 50.8 AR755&1064
Other Diameters and Focal Lengths can also be made for you. Please contact us.
Material Fused Silice
Lens Diameter 37mm ±0.1mm
Edge Thickness 7mm ±0.1mm
Laser type 1064nm (BBAR 1020nm-1080nm)
Optical Coating Both sides AR/AR@1064nm(1020nm-1080nm)
Application YAG/Fiber laser cutting/welding/Cladding machines
Laser power 500w-6000w
Material Fused Silica
Lens Diameter 55mm ±0.1mm
Edge Thickness 1.5mm ±0.1mm
Laser type 1064nm (BBAR 1020nm-1080nm)
Optical Coating Both sides AR/AR@1064nm(1020nm-1080nm)
Application YAG/Fiber laser cutting/welding/Cladding machines
Laser power 500w-6000w
Material Fused Silica
Lens Diameter 134mm ±0.1mm
Edge Thickness 3.0mm ±0.1mm
Laser type 1064nm (BBAR 1020nm-1080nm)
Optical Coating Both sides AR/AR@1064nm(1020nm-1080nm)
Application YAG/Fiber laser cutting/welding/Cladding machines
Laser power 500w-6000w
