Brief Introduction of the Single Glass Reactor
1. Single glass reactor using borosilicate glass, has excellent physical and chemical properties, bottles and transparent, visible reaction liquid material
2. Stirring tetrafluoroethylene, used in a variety of solvents stirring
3. Motor running smooth, torque, no spark
4. PTFE sealing components, high vacuum
5. Heated oil / water bath with precise control
6. Deconstruction is compact, easy to operate
Function feature of the Single Glass Reactor
1. Distillation, reflux can be achieved simultaneously
2. Special long-term agitation seal
3. GG17 glass and PTFE materials and contacts, no cross-contamination.
4. Digital speed and high and low temperature display, easy operation
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction.
Brief Introduction of the Jacket Glass Reactor
The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional.
The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Brief Introduction of the Jacket Glass Reactor
The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional.
The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Main Features of the Jacket Glass Reactor
1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties.
2, Speed mixing, smooth and reliable operation, torque, no spark.
3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic.
4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements.
5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution.
6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products.
7, The overall structure of science, novel, practical, beautiful, leading domestic.
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction.
Main Features of the Jacket Glass Reactor
1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties.
2, Speed mixing, smooth and reliable operation, torque, no spark.
3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic.
4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements.
5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution.
6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products.
7, The overall structure of science, novel, practical, beautiful, leading domestic.
This LGJ-30FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Freezing and drying process of LGJ-30FD (electric heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.
This LGJ-10FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc.
LGJ-10FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Freezing and drying process of LGJ-10FD (electric heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.
This GZL-2 water-cooled Pilot Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Main features of the GZL-2 water-cooled Pilot Freeze Dryer
1. It is our company's patented product . Freezing and drying is finished in the same place. It is easy to operate,and have a good drying effect.
2. Patented gas diversion technology, uniform ice catching in cold traps, and strong ice catching capability.
3. Internationally renowned brand compressors, high efficiency, long life, low noise.
4. Separator patented technology and partition temperature fuzzy control technology, the shelf temperature difference is small, the temperature control accuracy is high, and the drying effect is even.
5. The freeze-drying curve optimization control technology can control the cooling rate in the pre-freeze phase, and at the same time, it can control the sample heating rate and the current stage vacuum degree in the sublimation and analytical drying stages.
This LGJ-10 Multi Manifold Standard Type Vacuum Freeze Dryer is widely used in medicine, pharmacy, biology, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.This model is suitable for experiment in laboratory and small amount production ,and it can meet the regular freeze dying requirements of the most laboratories.
Features of the LGJ-10 Multi Manifold Standard Type Vacuum Freeze Dryer
. All-in-one structure , small size, no external flange, easy to use, no leakage.
. All materials in contact with the product use inert materials to meet the requirements of the GLP.
. The cold trap and console are made of stainless steel, which is anti-corrosion and easy to clean.
. All stainless steel inflated /water release valve is designed and produced by our company, which is safety, anti- corrosion, no leakage.
. With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless.
. Patented gas diversion technology, and strong ice holding ability.
. World- known brand compressors, high efficiency, long life, low noise.
. Well-known brand vacuum pump with a high pumping speed to achieve a higher ultimate vacuum.
. Vacuum pump protection function can set the cold trap temperature to protect the vacuum pump life.
. Professionally designed FD-LAB freeze-drying machine control system + SH-HPSC-I modular controller with high reliability and stability.
. Intelligent data recording system can real-time record and display the cold trap temperature curve, sample temperature curve, vacuum curve.
LG-20 Food Type Freeze Dryer achieves continuous lyophilization through optimized structure,and 50% efficiency increased. It can memorize freeze-dried curves for users to observe the lyophilization process of materials.
Features of the LG-20 Food Type Freeze Dryer
Pre-freezing and drying of separate structures are performed at the same time, which improves the freeze-drying efficiency and shortens the freeze-drying time.
Space alloy separator material, double-sided radiation heating, emissivity above 90%, good temperature uniformity.
Highly efficient mixed refrigerant medium, lower freezing point and higher boiling point, high heat exchange efficiency and long service life.
The drying curve optimization control algorithm can control the heating rate and vacuum value in the drying stage.
The patented gas diversion design and control technology have the strong ice catching ability and high drying efficiency.
Industrial-grade embedded touch screen + dedicated SH-HPSC-III modular controller, the system is stable and reliable, with high control accuracy.
Applications of the LG-20 Food Type Freeze Dryer for sale
This LG-20 Food Type Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Applications of the LG-5 Food Type Freeze Dryer for sale
This LG-5 Food Type Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc.
Features of the LG-5 Food Type Freeze Dryer
Pre-freezing and drying of separate structures are performed at the same time, which improves the freeze-drying efficiency and shortens the freeze-drying time.
Space alloy separator material, double-sided radiation heating, emissivity above 90%, good temperature uniformity.
Highly efficient mixed refrigerant medium, lower freezing point and higher boiling point, high heat exchange efficiency and long service life.
The drying curve optimization control algorithm can control the heating rate and vacuum value in the drying stage.
The patented gas diversion design and control technology have the strong ice catching ability and high drying efficiency.
Industrial-grade embedded touch screen + dedicated SH-HPSC-III modular controller, the system is stable and reliable, with high control accuracy.
The professionally designed FD-MANAGER control system can save multiple sets of process recipes, and can adjust the process in real time during the drying process to improve the process optimization rate.
Flexible manual + automatic control mode, manual groping process, and automatic batch production.
Accurate sensor calibration function ensures the accuracy of long-term use of process parameters.
Setting user level and password, and decentralizing operations and management.
Optional powerful LYO-MEGA main unit control system can record, save up to ten years of operating data, curves and alarm records, improve product trace ability; at the same time convenient observation, operation and fault diagnosis.
Non-standard freeze dryers can be customized as requested.
The LGJ-12 Standard /Top-Press Type Vacuum Freeze Dryer widely used in medicine, pharmacy, biology research, chemical industry and food production,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.LGJ-12 is suitable for experiment in laboratory or small quantity of production. It can meet the regular freeze drying requirments of the most laboratory.
Features of the LGJ-12 Standard /Top-Press Type Vacuum Freeze Dryer
. All-in-one structure , small size, no external flange, easy to use, no leakage.
. All materials in contact with the product use inert materials to meet the requirements of the GLP.
. The cold trap and console are made of stainless steel, which is anti-corrosion and easy to clean.
. All stainless steel inflated /water release valve is designed and produced by our company, which is safety, anti- corrosion, no leakage.
. With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless.
. Patented gas diversion technology, and strong ice holding ability.
This LGJ-18 Multi Manifold Type Vacuum Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered. It is a kind of the small vertical freeze-drying unit with shelf heating and programmable functions.
Features of the LGJ-18 Multi Manifold Type Vacuum Freeze Dryer
With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless.
Patented gas diversion technology, and strong ice holding ability.
World- known brand compressors, high efficiency, long life, low noise.
Well-known brand vacuum pump with a high pumping speed to achieve a higher ultimate vacuum.
Vacuum pump protection function can set the cold trap temperature to protect the vacuum pump life.
Applications of the LGJ-18 Multi Manifold Type Vacuum Freeze Dryer
Suitable for freeze-drying of bulk liquid, pasty, solid conventional materials. It can be equipped with a flask outside the drying chamber to dry the frozen material on the inner wall of the bottle. At this time, the flask is connected to the manifold as a container. The material in the flask is heated by room temperature, and the multi-manifold switch can be used to remove or install the flask at any time without downtime.
Freezing and drying process of LGJ-100F (silicon oil heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves for users to observe the lyophilization process of materials.ã??
ã??
This model is not only suitable for the freeze drying of bulk (liquid, pasty, solid) conventional materials, but also suitable for the drying of the vials materials. When the materials are ready for freeze-drying, they are put into in the vial, then begin freeze drying before the vial's lid unsealed. The capping device compacts the vials' lids after freeze drying to prevent secondary pollution, re-adsorb water, and facilitate long-term storage.
This LG-50 Food Type Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Features of the LG-50 Food Type Freeze Dryer
The drying curve optimization control algorithm can control the heating rate and vacuum value in the drying stage.
The patented gas diversion design and control technology have the strong ice catching ability and high drying efficiency.
Industrial-grade embedded touch screen + dedicated SH-HPSC-III modular controller, the system is stable and reliable, with high control accuracy.
The professionally designed FD-MANAGER control system can save multiple sets of process recipes, and can adjust the process in real time during the drying process to improve the process optimization rate.
Flexible manual + automatic control mode, manual groping process, and automatic batch production.
Accurate sensor calibration function ensures the accuracy of long-term use of process parameters.
Setting user level and password, and decentralizing operations and management.
Optional powerful LYO-MEGA main unit control system can record, save up to ten years of operating data, curves and alarm records, improve product trace ability; at the same time convenient observation, operation and fault diagnosis.
Non-standard freeze dryers can be customized as requested.
Brief introduction of the Silicon Oil Heating Freeze Dryer
This LGJ-100F Standard Type Pilot Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Optional accessories and functions of the Silicon Oil Heating Freeze Dryer
eutectic point tester
freeze drying finished judgement function
imported vacuum pump
vacuum pump anti-returned oil device
oil mist filter system
Vacuum adjustment system
LYO-MEGA Software System
·Mobile phone APP monitoring system
data recorder
backfill filter
Automatic backfill and drainage control system
Capacitance vacuum gauge
External hanging bottle device
non-standard customized
This LGJ-50FY Top Press Type Silicon Oil Heating Freeze Dryer is widely used in medicine, pharmacy, biology , chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
This model is not only suitable for the freeze drying of bulk (liquid, pasty, solid) conventional materials, but also suitable for the drying of the vials materials. When the materials are ready for freeze-drying, they are put into in the vial, then begin freeze drying before the vial's lid unsealed. The capping device compacts the vials' lids after freeze drying to prevent secondary pollution, re-adsorb water, and facilitate long-term storage.
LGJ-30FY Top Press Type Silicon Oil Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Freezing and drying process of LGJ-30F (silicon oil heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.
This LGJ-50FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Freezing and drying process of LGJ-50FD (electric heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.
Main Features of the High Temperature Oil Bath
Surface is processed by electrostatic spraying technology, liner and cover is made from stainless steel, corrosion resistant.
The device can be used for water bath as well as oil bath. Water bath with an accuracy of 0.1, oil bath with an accuracy of 1.
Volume range 5L, 10L, 20L, 30L, 50L, 80L, 100L, can be custom made according to client requirements.
Temperature control function inbuilt new generation PID automatic temperature control procedure, equipping with large screen LCD in both Chinese and English, digital display resolution ratio is 0.01
Inner circulating function use centrifuge circulating pump with no heat. The U type design of inner circulating system makes it in high balance of flow field and temperature field.
Fine workmanship of front panel and table board, plus unique R circular bead design to protect operator.
Water discharge system be used to various laboratory liquid changing.
Circulating system is made from stainless steel and cooper, antirust and anticorrosion.
Solid-state relay to control circuit, contactless and no naked fire.
Pumping flow as high as 15Lmin.
10L Rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries.
Main Features of the10L Automatic Lifting Rotary Evaporator:
1, The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress.
2, Sealing system using PTFE and imported fluorine rubber combination seal, to maintain high vacuum.
3, Vacuum pressure gauge shows real-time vacuum, vacuum up to 0.098Mpa.
4, Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion.
5, Can be continuously fed to facilitate the use of customers, valve-type feeding tube sets of tetrafluoroethylene tube.
6, Vertical three-tier serpentine coil condenser, the main cold + pay cold double condenser, to ensure high recovery rate, additional tube.
7, Microcomputer ON-OFF power switch control.
8, Bath digital display, intelligent thermostat control, K-type sensor fast and accurate delivery temperature.
9, Frequency control (0-120rpm), speed digital display, knob set, easy to operate.
10, Fuse safety protection.
11, The pot is made of high quality stainless steel, durable and durable.
12, Bath handwheel lift.
13, Collection of bottles with a discharge material, easy to evaporate the collection of extracts, discharge.
14, Check valve control, continuous discharge.
Features of the GZL-1 Standard Type Pilot Freeze Dryer
It is our company's patented product . Freezing and drying is finished in the same place. It is easy to operate,and have a good drying effect.
Patented gas diversion technology, uniform ice catching in cold traps, and strong ice catching capability.
Internationally renowned brand compressors, high efficiency, long life, low noise.
Separator patented technology and partition temperature fuzzy control technology, the shelf temperature difference is small, the temperature control accuracy is high, and the drying effect is even.
The freeze-drying curve optimization control technology can control the cooling rate in the pre-freeze phase, and at the same time, it can control the sample heating rate and the current stage vacuum degree in the sublimation and analytical drying stages.
The powerful sensor calibration function ensures the long term accuracy of the measured value.
7-inch true color industrial embedded touch screen SH-HPSC-II modular controller, high control accuracy, stable and reliable performance.
Applications of the GZL-1 Standard Type Pilot Freeze Dryer
GZL-1 Standard Type Pilot Freeze Dryer Suitable for freeze drying of bulk (liquid, pasty, solid) conventional materials.
SHZ-DIII water circulating vacuum pump series uses the circulating water as the working fluid, and uses the jet to produce negative pressure to spray.It provides vacuum conditions for evaporation, distillation, crystallization, drying, sublimation, decompression and filtration
Main features of SHZ-DIII water circulating vacuum pump:
1. This machine adopts double-tap, can be used alone or in parallel, with two tables;
2. The host of stainless steel stamping, sophisticated appearance, the case is of special engineering plastics;
3. Silencer with a special fluid, reduce water, gas and liquid friction noise, so that higher and more stable vacuum. Corrosion-resistant, no pollution, low noise, easy to move, but also the user needs to install a vacuum valve, easy to operate;
4. Storage tanks using a newly developed special plastic material, containing acetone, ether, chloroform and other organic chemicals operations, with some corrosion resistant dissolution
Application of SHZ-DIII water circulating vacuum pump
SHZ-DIII water circulating vacuum pump could be used in various kinds of distillation and filtration experiments. It's an important and ideal device for lab and other chemical departments.
Brief Introduction of the SHZ 95B Vacuum Pump
The main machine is made of two types of stainless steel movement and anti corrosion material movement. It has the advantages of corrosion resistance, no pollution, low noise, convenient movement, and also can install vacuum control valve according to the user's needs. At the same time, five students can do chemical experiments to reduce the experimental space. Five taps with five suction heads can be used at the same time.
Characteristic of the SHZ-95B Vacuum Pump
No oil used, non-pollution, high power, low noise,easy and flexible.
Water-saving power-saving, it is a single table multi pipe operation machine.
With five taps, can be used independently or in parallel combination.
Corrosion-resistant, non-pollution, stable operation, long life.
Main engine has polypropylene and stainless steel two models.
The molecular distillation is a special liquid-liquid separation technology, which is different from traditional distillation relying on the difference between boiling points. This is a kind of process of distilling and purifying the heat sensitive material or high boiling point material by making use of the difference of material molecular movement free path in high vacuum degree. The molecular distillation is mainly used in chemical, pharmaceutical, petrochemical, spices, plastics, oil and other fields.
This Molecular Distillation has the following advantages
High evaporation efficiency, reducing retention time; with minimal time delay
The high precision glass tube allows the liquid to form a complete integrated film on the heated surface;
The MD molecular distillation system consists of borosilicate glass and PTFE and SS316L, so it has excellent corrosion resistance;
The stirring motor system adopts magnetic stirring system, no noise, higher stirring speed and faster film forming speed;
The squeegee film forming system is made of PTFE material and 316L, which has higher corrosion resistance;
the system's maximum temperature can reach 230 C;
Brief Introduction of the Jacket Glass Reactor
The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional.
The working principle of the series reactor: double layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat water, water or hot oil or electric sets to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction.
RE-100L rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Its principle is: under vacuum condition, constant temperature heating makes the rotary bottle rotate at constant speed, and the material forms large area film on the bottle wall, so it can be evaporated efficiently. The solvent evaporation is cooled by the high-efficiency glass condenser and recovered in the collecting bottle, so as to greatly improve the evaporation efficiency. The utility model is especially suitable for concentrating and purifying biological articles with high temperature and easy decomposition and degeneration.
Applications of the RE-100L Rotary evaporator
RE-100L rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries.
Brief Introduction of the 30L rotary evaporator
30L rotary evaporator is a common laboratory equipment. It's consisted with motors, distillation flask, heating pots, receiving flask, condensers and so on. This device is mainly used for continuous distillation experiments under vacuum conditions. Our company designed 10L, 20L, 30L ,50L medium vacuum rotary vacuum evaporator for users to choose.
Main Features of the RE-3002 rotary evaporator
1. The main frame of stainless steel and aluminum alloy
2. Polytetrafluoroethylene and imported fluororubber combined seal
3. The real-time display of the vacuum is up to 0.098Mpa
4. GG-17 glass,High temperature resistance, anticorrosion
5. Continuous feed
Brief Introduction of the 1L rotary evaporator
RE-52C rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Its principle is: under vacuum condition, constant temperature heating makes the rotary bottle rotate at constant speed, and the material forms large area film on the bottle wall, so it can be evaporated efficiently. The solvent evaporation is cooled by the high-efficiency glass condenser and recovered in the collecting bottle, so as to greatly improve the evaporation efficiency. The utility model is especially suitable for concentrating and purifying biological articles with high temperature and easy decomposition and degeneration.
1L rotary evaporator is an indispensable instrument for evaporation, concentration, crystallization, drying, separation and solvent recovery in the research and production of medicine, chemical and biological products. The rotary evaporator is developed under the condition of vacuum and negative pressure, using the principle of constant temperature heating and thin film evaporation. Rotary evaporator with stepless rotation of the glass bottle rotating at a constant speed, the material is formed large area uniform film on the bottle wall, then the intelligent thermostatic water bath for rotating the bottle uniformly heated at high speed under the condition of vacuum evaporation, solvent vapor by high performance glass condenser cooling, recycling in collecting bottle. Rotary evaporator is working under vacuum, and all material contact part adopts the high temperature resistant borosilicate glass and Teflon material, concentrated especially suitable for biological products of high temperature easy decomposition degeneration and purification. The factory set rotary evaporator essence of similar products at home and abroad, in successful practice, has formed 1L,2L, 5L, 10L, 20L, 30L,50L, 100L series, efficient and practical, follow the economic principles of product design, all for the sake of users.
Main Features of the RE-52C rotary evaporator
1, the main stent adopts antiseptic spraying + aluminum alloy. The structure is reasonable and the materials are exquisite.
2, the sealing system adopts PTFE and imported fluorine rubber combination seal, can maintain high vacuum.
3, all glass parts using high borosilicate glass (GG-17), high temperature, corrosion protection.
Brief Introduction of the Automatic Lifting Rotary Evaporator
3L rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries
Main Features of the 3L Automatic Lifting Rotary Evaporator
1, the main bracket adopts stainless steel + aluminum alloy, the structure is reasonable, and the materials are exquisite.
2, the sealing system adopts PTFE and imported fluorine rubber combination seal, can maintain high vacuum.
3, the vacuum pressure gauge shows real-time vacuum, and the vacuum can reach 0.098Mpa.
4, all glass parts using high borosilicate glass (GG-17), high temperature, corrosion protection.
5, continuous feeding is convenient for customers to use, the valve type feeding pipe is sheathed with tetrafluoroethylene tube.
6, vertical double coil coil condenser, ensure high recovery, additional tubes.
7 ã?? microcomputer ON-OFF power switch control.
8, bath pot digital display, intelligent constant temperature control, K type sensor fast and accurate delivery temperature.
9, electronic stepless speed regulation (0-120rpm), speed digital display, rotation and torsion settings, easy to operate.
10 fuse safety protection.
11, the pot adopts high quality stainless steel, corrosion resistant and durable.
1, the main bracket adopts stainless steel + aluminum alloy, the structure is reasonable, and the materials are exquisite.
2, the sealing system adopts PTFE and imported fluorine rubber combination seal, can maintain high vacuum.
3, the vacuum pressure gauge shows real-time vacuum, and the vacuum can reach 0.098Mpa.
Brief Introduction of the 5L Rotary Evaporator
5L explosion-proof rotary evaporator (instrument) is our company in order to adapt to the modern pharmaceutical and chemical reaction test production needs, the RE series rotary evaporator (instrument) and a new generation of products based on the national key institutions joint development and production, the series of products using explosion-proof motor, explosion-proof explosion-proof inverter and intelligent temperature control box. PTFE sealing material, sealing, corrosion resistance, abrasion resistance, frequency conversion speed, smooth operation. RE-501 explosion proof rotary evaporator is an indispensable instrument for evaporation, concentration, crystallization, drying, separation and solvent recovery in the research and production of medicine, chemical and biological products. The rotary evaporator is developed under the condition of vacuum and negative pressure, using the principle of constant temperature heating and thin film evaporation. Rotary evaporator with stepless rotation of the glass bottle rotating at a constant speed, the material is formed large area uniform film on the bottle wall, then the intelligent thermostatic water bath for rotating the bottle uniformly heated at high speed under the condition of vacuum evaporation, solvent vapor by high performance glass condenser cooling, recycling in collecting bottle. Rotary evaporator is working under vacuum, and all material contact part adopts the high temperature resistant borosilicate glass and Teflon material, concentrated especially suitable for biological products of high temperature easy decomposition degeneration and purification.
Brief Introduction of the 10L Rotary evaporator:
10L Rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Its principle is: under vacuum condition, constant temperature heating makes the rotary bottle rotate at constant speed, and the material forms large area film on the bottle wall, so it can be evaporated efficiently. The solvent evaporation is cooled by the high-efficiency glass condenser and recovered in the collecting bottle, so as to greatly improve the evaporation efficiency. The utility model is especially suitable for concentrating and purifying biological articles with high temperature and easy decomposition and degeneration.
Main Features of the 10L Rotary evaporator
1, The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress.
2, Sealing system using PTFE and imported fluorine rubber combination seal, to maintain high vacuum.
3, Vacuum pressure gauge shows real-time vacuum, vacuum up to 0.098Mpa.
4, Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion.
5, Can be continuously fed to facilitate the use of customers, valve-type feeding tube sets of tetrafluoroethylene tube.
6, Vertical three-tier serpentine coil condenser, the main cold + pay cold double condenser, to ensure high recovery rate, additional tube.
7, Microcomputer ON-OFF power switch control.
8, Bath digital display, intelligent thermostat control, K-type sensor fast and accurate delivery temperature.
9, Frequency control (0-120rpm), speed digital display, knob set, easy to operate.
10, Fuse safety protection.
11, The pot is made of high quality stainless steel, durable and durable.
12, Bath handwheel lift.
13, Collection of bottles with a discharge material, easy to evaporate the collection of extracts, discharge.
14, Check valve control, continuous discharge.
The Short Path Distillation Unit is mainly used for the distillation and purification of heat sensitive substances or high boiling substances under high vacuum. The entire system consists of ss316L stainless steel, PTFE and borosilicate glass 3.3. Main application areas: chemical industry, pharmaceutical industry, petrochemical industry, perfume industry, plastics industry and oil industry.
Short Path Distillation Unit has the following advantages:
1. High evaporation efficiency, reducing retention time; with minimal time delay;
2. The high precision glass tube allows the liquid to form a complete integrated film on the heated surface;
3. The MD molecular distillation system consists of borosilicate glass and PTFE and SS316L, so it has excellent corrosion resistance;
4. The stirring motor system adopts magnetic stirring system, no noise, higher stirring speed and faster film forming speed;
5. The squeegee film forming system is made of PTFE material and 316L, which has higher corrosion resistance;
6, the system's maximum temperature can reach 230 �° C;
7. The PTFE scraper is closely attached to the inner wall of the evaporation, and a film is formed on the evaporation surface by the rotary squeegee to improve the evaporation efficiency and reduce the operation time;
8. The whole evaporator is made of high borosilicate glass, which can clearly observe the operation of the whole process;
The heating method can be changed according to actual needs: heating of the ceramic ring to achieve heating temperature: room temperature - 350 C;
The all-package distiller can be modified by changing the distillation as needed: the feed pipe is heated, and the heavy components and light components are thermostated.
Brief Introduction of the 20L Automatic Lifting Rotary Evaporator
20L Rotary Evaporator is an indispensable instrument for evaporation, concentration, crystallization, drying, separation and solvent recovery in scientific research and production processes in the pharmaceutical, chemical and biological products industries. The rotary evaporator is developed under the vacuum negative pressure condition by the principle of constant temperature heating and thin film evaporation.
Main Features of the 20L Automatic Lifting Rotary Evaporator
1. The main body bracket is made of stainless steel + aluminum alloy, the structure is reasonable, and the materials are exquisite.
2. The sealing system is sealed with a combination of Teflon and fluoroelastomer to maintain vacuum.
3. The vacuum gauge shows a real-time vacuum with a vacuum of 0.098 MPa.
4. The glass parts are made of borosilicate glass (GG-17), which is resistant to high temperatures and corrosion.
5. Continuous feeding is convenient for customers, and the valve type feeding tube is sleeved with PTFE tube.
6. Upright three-layer serpentine coil condenser, main cold + pay cold double condenser, to ensure recovery rate, additional material tube.
Brief Introduction of the Vacuum Drying Oven
1.The drying oven body is made of high quality cold-rolled steel sheet powder coated which is tuff and rustproof.
2. The chamber is made of high quality stainless steel chamfer angled which is smooth and very easy to clean.
3. Between the oven body and the chamber itâ??s stuffed with high quality thin glass fiber thermic insulant which has fine heat insulation feature. So the temperature in the chamber is stable and accurate without interference from the environment.
4. It is easy to observe the inner samples through the double glass door (in the front it is armoured glass). The double glass door also has good heat preservation to protect the operator from scald.
5. The heat resistant silicone rubber sealant between the chamber and the glass door ensures the high vacuum level in the working chamber.
6. The heater is installed around the outside surface of the chamber to enhance the temperature uniformity and to serve the convenience of inner chamber cleaning.
7. The microchip intelligent digital temperature controller has industrial PID auto-tuning function and 4-digits double LED display. It has the features of high temperature control accuracy, high anti-interference and easy operation. (Refer to the detailed controller manual)
Application of the Vacuum Drying Oven
This vacuum drying oven is used for the laboratory and workshop in the research institutes, colleges, industrial enterprises to dry or heat treatment. The advantages of drying in the vacuum environment are as followed:
1) Low temperature is applicable.
2) To avoid oxidation for some heat-sensitive samples.
3) To avoid sterilization with air.
4) Without any dust.
This LG-1 Food Type Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
Features of the LG-1 Food Type Freeze Dryer
Pre-freezing and drying of separate structures are performed at the same time, which improves the freeze-drying efficiency and shortens the freeze-drying time.
Space alloy separator material, double-sided radiation heating, emissivity above 90%, good temperature uniformity.
Highly efficient mixed refrigerant medium, lower freezing point and higher boiling point, high heat exchange efficiency and long service life.
The drying curve optimization control algorithm can control the heating rate and vacuum value in the drying stage.
The patented gas diversion design and control technology have the strong ice catching ability and high drying efficiency.
Industrial-grade embedded touch screen + dedicated SH-HPSC-III modular controller, the system is stable and reliable, with high control accuracy.
The professionally designed FD-MANAGER control system can save multiple sets of process recipes, and can adjust the process in real time during the drying process to improve the process optimization rate.
Flexible manual + automatic control mode, manual groping process, and automatic batch production.
Accurate sensor calibration function ensures the accuracy of long-term use of process parameters.
Setting user level and password, and decentralizing operations and management.
Optional powerful LYO-MEGA main unit control system can record, save up to ten years of operating data, curves and alarm records, improve product trace ability; at the same time convenient observation, operation and fault diagnosis.
Non-standard freeze dryers can be customized as requested.
