innoCon 6501P controller is specially designed for water treatment and industrial process control. Used with innoSens pH/Redox sensor, it can measure the pH, Redox and temperature of the sample water.
It features automatic temperature compensation and has various mounting methods. 4-20mA and multiple control function outputs are a standard feature
innoCon 6800C controller is specially designed for water treatment and industrial process control. Used with innoSens 310/330 sensor, it can measure the conductivity,resistivity,TDS and temperature of the sample water. It features automatic temperature compensation and has various mounting methods. 4-20mA/RS485 and multiple control function outputs are a standard feature.
Chlorine Analyzer of DPD Colorimetric Method
PACON 2500 chlorine analyzer, is a measurement instrument of accurate, cost-effective and low
maintenance, Can be on-line continuous monitoring of residual chlorine.
PACON 2500 uses DPD colorimetric method to detect residual chlorine of the concentration, the
automatic addition of reagent colorimetric measurement, suitable for chlorine disinfection process in the residual chlorine measurement and monitoring of Residual Chlorine Concentration in Drinking Water.
Application
Chlorine concentration monitoring of tap water and drinking water pipelines
Chlorination disinfection of wastewater and industrial cooling water
the water
Features ! Analyzer
DPD colorimetric method, the measurement is more accurate and stable
- See American Standard Methods
- GB method, consistent with the laboratory method
Automatic diagnosis and automatic calibration
- Automated continuous self-diagnosis monitoring
- Built-in calibration curve, calibration is very simple
Low reagent consumption, easy to replace
- Each reagent can measure 4000 times
- Reagent replacement is simple, simply pour the DPD powder into the indicator solution and dissolve it for use
Automatic and manual measurement mode
- Automatic measurement cycle optional: 300-3600s
- A key (down arrow) to quickly start a measurement
IP65 degree of protection
-Indoor wall installation.
Rs485 output
-Standard Modbus RTU communication
protocol. The baud rate is fixed at 9600.
Password protection to prevent unauthorized operations
-Password: 0022, English and Chinese menu.
The streaming current is used to continuously measure the electric charge on the tiny suspended particles and colloids in the liquid. The electric charge is measured by electronic signal processing.
The measurement result is converted into A.C signal or flowing current (SC). The value of flowing current (SC) is proportional to the charge density. The charged state depends on the water after flocculation.
innoCon 6800CL Controller is specially designed for water treatment and industrial process control. Used with innoSens 710 sensor and PA-711 flow cell, it can measure the concentration of residual chlorine, chlorine dioxide and ozone in the water. Its adoption of membrane free constant voltage sensor eliminates the need for membrane and reagent replacement. Furthermore, it is highly sensitive and stable, only requiring simple maintenance.
innoCon 6800C controller is specially designed for water treatment and industrial process control. Used with innoSens 310/330 sensor, it can measure the conductivity,resistivity,TDS and temperature of the sample water. It features automatic temperature compensation and has various mounting methods. 4-20mA/RS485 and multiple control function outputs are a standard feature.
innoCon6800O controller matching with innoSens 420 polarographic dissolved oxygen sensor, can continuously monitor the dissolved oxygen in water, with NTC automatic temperature compensation, panel installation, suitable for using under a variety of weather and complex industrial environments.
Application:
Wastewater Treatment
Surface Water
Aquaculture
The PACON 4800 Online Hardness Analyzer uses the principle of titrimetric colorimetry and is the best choice for water softening systems and reverse osmosis protection for enrey-level measurement..
Measurement Parameters
Total Hardness
Applications
Demineralized water
Reverse osmosis
Boiler water
Laundry room
Groundwater
Cooling tower
Pharmaceutical water
Process water
Drinks / food
Fully automatic measurement
According to the selected reagent, automatically measure the total water hardness in different ranges. This analysis is more efficient than manual measurements and more reliable than other indirect measurement methods such as ion-selective electrodes.
Smart & accurate & stable
GB measurement method - Titration calorimetry method, the instrument has a calibration function. Integrated measurement techniques and two-stage analysis identify external influences such as trough contamination, watery turbidity and external light and eliminate these effects in the measurement.
A variety of measurement modes
- Continuous measurement
- Interval measurement (5-99min)
- External switch signal initiates a measurement
Compact design
The dimension is only 300x300x200mm, can be directly linked to the wall or mounted on the bracket.
Minimum maintenance workload
Complete isolation of water and testing device, detachable measuring cell, without the need for additional tools for maintenance, can be easily implemented. It is recommended to replace the spare
parts package once a year (including: peristaltic pump head reagent tube, stirrer, seal, order number: 50-5000-10)
Automatic cleaning
Rinsing and Cleaning are performed automatically for each analysis, ensuring measurement accuracy, repeatability and reduced field maintenance.
Low reagent consumption
Reagent bottle can be easily replaced, 500ml reagent can measure 5000 ~ 10000 times. Reagents valid for 2 years.
LCD backlight LCD display
Multi-language graphics backlight LCD display measurements, reagent remaining, alarm values and relay status.
0 / 4-20mA output
SD card data storage
2G data storage card, can be directly imported into the computer to excel format access to historical data and system failure information.
The PACON 4800 Online Hardness Analyzer uses the principle of titrimetric colorimetry and is the best choice for water softening systems and reverse osmosis protection for enrey-level measurement..
Measurement Parameters
Total Hardness
Applications
Demineralized water
Reverse osmosis
Boiler water
Laundry room
Groundwater
Cooling tower
Pharmaceutical water
Process water
Drinks / food
Fully automatic measurement
According to the selected reagent, automatically measure the total water hardness in different ranges. This analysis is more efficient than manual measurements and more reliable than other indirect measurement methods such as ion-selective electrodes.
Smart & accurate & stable
GB measurement method - Titration colorimetry method, the instrument has a calibration function. Integrated measurement techniques and two-stage analysis identify external influences such as trough contamination, watery turbidity and external light and eliminate these effects in the measurement.
dimension is only 300x300x200mm, can be directly linked to the wall or mounted on the bracket.
Minimum maintenance workload
Complete isolation of water and testing device, detachable measuring cell, without the need for additional tools for maintenance, can be easily implemented. It is recommended to replace the spare
parts package once a year (including: peristaltic pump head reagent tube, stirrer, seal, order number: 50-5000-10)
Automatic cleaning
Rinsing and Cleaning are performed automatically for each analysis, ensuring measurement accuracy, repeatability and reduced field maintenance.
Low reagent consumption
Reagent bottle can be easily replaced, 500ml reagent can measure 5000 ~ 10000 times. Reagents valid for 2 years.
LCD backlight LCD display
Multi-language graphics backlight LCD display measurements, reagent remaining, alarm values and relay status.
0 / 4-20mA output
SD card data storage
2G data storage card, can be directly imported into the computer to excel format access to historical data and system failure information.
