Resin trap filter is generally installed at the back end of the negative bed, positive bed, and mixed bed of the ion exchanger. When the quality of the resin is poor and the water pressure disturbance is large (especially high pressure disturbance). When the resin is damaged, the resin will enter the back-end desalted water system and affect the normal operation of other equipment in the system, so a resin trap filter screen needs to be installed.
On the water system pipeline near the outlet of equipment containing resin such as ion exchangers, install a resin trap filter screen with a hole diameter much smaller than that of the resin. It also has a flushing function. When the resin passes through, it can be intercepted and captured by the filter screen. At the same time, it is automatically flushed through the front and rear differential pressure to discharge the captured resin out of the system.
Resin trap filter is used as a supplementary equipment of the ion exchanger to prevent the trapped resin from leaking into the desalted water system when the water outlet device fails. To ensure the normal operation and use of subsequent equipment. It has small size and high recycling efficiency.
Our resin trap filter uses stainless steel wedge wire screen as raw material. The stainless steel trapezoid profile wire filter screen has high capture efficiency, large flow area, good mechanical strength and low pressure.
This self-cleaning filter is mainly used in various industrial circulating water filtration systems. It can be used in many industrial environments, such as water treatment, petrochemical, pharmaceutical, food and beverage, mining, electronics factories and battery manufacturing industries.
Bluslot automatic self-cleaning filter is an intelligent fully automatic filter. Compared with previous filters, it has the advantages of high degree of automation, large processing capacity, self-cleaning and sewage discharge, uninterrupted water supply, and wide application. This product has high filtration precision, short cleaning time, low water consumption and small pressure loss, and can provide you with stable and reliable water quality assurance.
Bluslot Automatic Self-cleaning Filter is equipped with a powerful intelligent control system and an electrically driven self-cleaning device. The control system comes standard with a large-screen color Chinese LCD touch display. The system comes with a manual for your convenience.
At the same time, it can display the running status of the equipment online in real time and has an output interface reserved to realize the remote monitoring function. The machine also has overload protection, no-load protection and alarm functions, allowing you to use this product with confidence.
Our resin trap filters can protect you from loss. Gradual loss of resin can go unnoticed, or it can be the disaster of accidentally delivering large amounts of resin to the production line.
Bluslot's resin trap filter screen is designed and manufactured to meet your specific needs. Our flexibility in design creates many options. Customized services for various material products can be provided.
Resin trap filter is used to install on existing and new filter bodies. To trap media and resin to prevent loss and prevent them from moving downstream.
One end of the Resin trap filter is sealed by a stainless steel plate, and the other side has a flange. This design facilitates installation on equipment. It has continuous grooves and smooth surfaces.
Resin collectors are usually made of corrosion-resistant stainless steel to avoid problems that often lead to accelerated corrosion.
Johnson Wedge Wire Resin Trap Filter For Condensed Water
Condensed water is radiant cooling on the surface of a surface or object, and condensed water on the surface of an object. Also in the industrial production process, the water is steam-cooled. In nuclear electric or pyroelectric condensed water treatment system, demand use resin trap. Resin particles that can be used and collected along with the water supply.
After completing the use of the resin trap, use a specific cleaning device to clean it.
Currently universally used resin trap strainer is a good finished work. Comprehensive main problems: Easy to stagnate, easy to rot, short service life.
Our resin trap filter adopts special surface treatment process, more corrosion resistant. Possible to increase 35% service life.
Resin Trap Filter For Wastewater Treatment Ion Exchange
When using resin for online wastewater treatment, when the quality of the resin is poor (not strong enough), the water pressure disturbance is large (especially high pressure disturbance), and the resin cylinder wall is damaged, the resin will enter the entire water system.
It will affect the normal operation of other equipment in the system, so a resin trap filter needs to be installed.
The resin trap is mainly to install a filter screen with a pore size much smaller than that of the resin on the water system pipeline near the outlet of the ion exchanger and other equipment equipped with resin, and has a flushing function. When the resin passes, it can be intercepted and captured by the filter. At the same time, it is automatically rinsed through the differential pressure of the front and rear to discharge the captured resin out of the system.
When using a filter to treat wastewater containing ion exchange resins (such as photovoltaic wastewater after ion adsorption), the filter may not completely treat the ion exchange resin or leak out. It will affect the normal operation of the subsequent equipment, cause the water terminal to contain ion exchange resin, and reduce the cleanliness of the water.
Product introduction:The slope screen spiral extrusion solid-liquid separator works continuously by means of spiral extrusion. It is suitable for materials with 0.3mm solid particles, large solid proportion in the feed liquid and low moisture content after separation. It is especially suitable for the dewatering and separation of pig manure (blister manure) with water content higher than 90% into liquid organic fertilizer and solid organic fertilizer. The solid-liquid separator divides the solid-liquid separation cylinder into centrifugal separation section and extrusion separation section, that is, the solid-liquid separation and solid-liquid separation of biogas residue are carried out through centrifugal separation and extrusion separation, the water content of biogas residue is greatly reduced, the drying time of biogas residue is reduced, the drying cost is reduced, and the time and cost are saved for users producing biogas fertilizer.
Manure separators are a vital piece of equipment used in a range of industries, from livestock operations to wastewater treatment. They are designed to separate manure and other solid materials from liquid streams, such as wastewater, in order to reduce the amount of contaminants in water and to reduce nutrient runoff that can pollute nearby water sources.
Manure separators come in a variety of sizes and designs and can be used for both large and small operations. They are most often used in agricultural settings, such as animal farms and dairy farms, in order to separate solid animal waste from liquid waste streams, reducing the number of contaminants in the water. The separators are also used in wastewater treatment plants in order to remove solid materials before the water is released back into the environment.
Manure separators are often used in conjunction with other technologies, such as screens, filters, and centrifuges in order to further reduce the number of contaminants in water. These separators can also be used in other industries, such as food processing and industrial manufacturing, where solid materials need to be separated from water.
Manure separators are an important technological tool used to reduce the amount of contaminants in water and to protect the environment from nutrient runoff. Their use is essential for a range of industries, from livestock operations to wastewater treatment plants, in order to maintain a safe and healthy environment.
Resin trap filter is generally installed at the back end of the negative bed, positive bed, and mixed bed of the ion exchanger. When the quality of the resin is poor and the water pressure disturbance is large (especially high pressure disturbance). When the resin is damaged, the resin will enter the back-end desalted water system and affect the normal operation of other equipment in the system, so a resin trap filter screen needs to be installed.
On the water system pipeline near the outlet of equipment containing resin such as ion exchangers, install a resin trap filter screen with a hole diameter much smaller than that of the resin. It also has a flushing function. When the resin passes through, it can be intercepted and captured by the filter screen. At the same time, it is automatically flushed through the front and rear differential pressure to discharge the captured resin out of the system.
Resin trap filter is used as a supplementary equipment of the ion exchanger to prevent the trapped resin from leaking into the desalted water system when the water outlet device fails. To ensure the normal operation and use of subsequent equipment. It has small size and high recycling efficiency.
Our resin trap filter uses stainless steel wedge wire screen as raw material. The stainless steel trapezoid profile wire filter screen has high capture efficiency, large flow area, good mechanical strength and low pressure.
Resin trap filter for water treatment are very important. Like insurance that protects you, your home or business, resin traps ensure that your industrial water equipment will not suffer any partial or total loss of media in the event of any failure.
Resin trap strainers are simple and low-cost protection devices typically installed in activated carbon and ion exchange units, media filters, and service outlets and backwash lines at the outlet of high-purity water systems.
The wedge wire resin trap screen ensures that the filter media or ion exchange resin does not escape from the water treatment unit it actually belongs to, but can flow downstream where it is not needed.
Bluslot is one of the leading resin trap filter nozzles manufacturer companies and they are known for producing high quality plastic and stainless steel resin traps. The company is a well-known supplier of thermoplastic filter nozzles for water treatment for over 30 years, and resin trap filter are part of its product range.
