Resin Glass Banding Tape
Glass Banding Tape (also known as Armature Banding Tape, Resin glass Tape, Fiber Banding Tape, Polyglass Tape) is a high strength non-woven glass tape used for banding of rotor, armatures and transformer core. It consists of high strength glass yarns laid parallel, impregnated with special high temperature thermosetting polyester resin. During cure, the resin flows and fills the voids and air spaces to produce a homogeneous laminate with a smooth resin surface.
JAY INDUSTRIES is dealing in Resin Glass Banding Tape for more than 25 Years and are catering to vast Indian Domestic Market as well as Exporting to many countries of the World.
Applications Of Our Resi Glass Tapes
As a winding restraint on traction armatures, generators other rotating machines & transformer core binding.
Other application where high tensile strength and insulating properties of the product can be made use of.
Features
High Thermal Resistance of upto 200oC. Short period of heating upto 260oC may be tolerated, whereas solder may melt on steel wires.
Very high Arc Resistance thereby minimizing the possibility of â??flash overâ?? which has often been a problem with steel bands.
Resistant to humidity and corrosion.
Smooth cured surface on application of banding tape reduces dirt adhesion, which might otherwise lead to tracking failure.
Non-conducting material, hence eliminates insulation as required under steel banding.
Prevents Lashing banding tape bands gone far in eliminating the extreme damage caused by lashing wires & lifting armature coils experienced when steel bands break.
Composite material Banding Tape is supplied in a semi cured soft balanced flat ribbon of glass yarn & high temp. polyester resin. Thus ensuring that each yarn bears a distributed share of load. Banding Tape forms a high strength loop, holds the coil in place against centrifugal forces and has a high safety factor, once suitably applied under requisite winding tension & cured to recommended cycle. Supports weight reduction as compared to steel banding wire.
Sizes Available in Ex-Stock:
Width : 20 mm (3/4), 25 mm (1), 38 mm (1) & 50 mm (2).
Length: Roll of 100 Meter / 200 Meter.
Heat Shrink Polyester Woven Tape / Strap.
JAY INDUSTRIES is in the Manufacturing of 100% Polyester Filament Yarn Woven Tapes & Straps
Also known as Woven Terylene Tape, Woven Polyester Tape is an excellent alternative to most cotton tapes and can features optional centre lines for easy application and identification.
COMMON FEATURES :
â?¢ Excellent di-electric properties.
â?¢ Good chemical resistance.
â?¢ Good reinforcement to insulating varnishes
â?¢ Armoring against mechanical damage.
Application:
Electromechanical applications in general and finishing tapes and / or during the winding of small electric motors and transformers. ground insulation, bunching of conductors, lacing of coils for class F applications. Very absorbent, they provide an excellent substrate for insulating varnish finish. Applications of low criticality and limited heat demand.
Standard Sizes available Ex-Stock :
(Herringbone Weave)
4 mm x 0.35 mm x 500 Mt. (550 Yards)
6 mm x 0.35 mm x 500 Mt. (550 Yards)
8 mm x 0.35 mm x 400 Mt. (440 Yards)
10 mm x 0.35 mm x 400 Mt. (440 Yards)
(Herringbone Weave)
12 mm x 0.35 mm x 50 Mt. (55 Yards)
18 mm x 0.35 mm x 50 Mt. (55 Yards)
25 mm x 0.35 mm x 50 Mt. (55 Yards)
( Plain Weave )
25 mm (1) x 0.13 mm (5 Mill) x 50 Mt. (55 Yards)
25 mm (1 x 0.20 mm (7 Mill) x 50 Mt. (55 Yards)
Multiple Variation in construction can be made. Please see the Technical Properties Chart and share us your specific enquiries.
We welcome Enquiries from Indian & International Electrical Motor, Transformers and Other Rotating Equipment Manufacturers.
