Model EEW-NP Tank Dimension: 550(W)x550(D)x650(H)mm HDPE material, anti-UV and flameproof Volume 80Liters Available Flow Capacity 40Liters, supply for above 15mis washing work Eyewash Plate Dimension: 204(W)x326(D)x111(H)mm HDPE material, anti-UV and flameproof Spray head Nylon materialï¼?provide more than 1.5L/min water flow Water Pipe Line Supply (inlet) Inlet pipe is silicon material with seal for avoiding leaking Waste (outlet) 1/2â?? PVC transparent pipe, drain waste water to the sink or to waste liquid disposal bottle Sign Symbol Size: 185(W)x200(H)mm On the green eyewash tray Operation Instruction Size: 100(W)x250(L)mm On the left side of the tank Maintenance Instruction Size: 100(W)x250(L)mm On the right side of the tank Operation 1. Just pull down the green eyewash tray and the tank will be activated to deliver a dual stream of water. 2. User has to hold eyelids open and roll eyeball to let water flow on all the surfaces and moisten the surrounding of eyeball. 3. Push up the green eyewash tray to the original place when not in use.
Emergency shower & eyewash Emergency shower and eyewash provide on-the-spot decontamination. They allow workers to flush away hazardous substances that can cause injury. The first seconds after exposure to a hazardous substance are critical. Emergency showers and eyewash stations are necessary safety equipment in workplace and public place to minimize the injury of accident exposure to chemicals. Features * Whole design supplies flow shower to immediately alleviate injured people in body as well as eyes, achieving the best of protection. * All tubes of the equipment are made SUS304# material with special antirust process. Durable and stable structure, both aesthetic and functional. * Whole set of equipment is just need to provide with water supply tube, easily fixed and installed. * All designs meet with ANSI Z358.1-1998, CNS14251 T2048-1998, DIN 12899 Suitable Areas Chemical industry, pesticide factory, laboratory, hospital and semiconducting material industry, etc. All models can be customized to perform well in any environment.
Extraction Arms- Local extraction system for a clearer working environment. Installation of fume extraction systems at the source of the pollution during the working processes prevent the spread of polluted air into the surroundings. The arms are connected to a vacuum fan and filter device removing the contaminants from the extracted air so that it can be exhausted to the atmosphere. A local extraction system is the best solution for a clean working environment. -Easy operationsENSHINE extraction arms are easy to remove and position. The extraction arm is easy to adjust for capturing the source of the pollution during the work processes. Additional, the extraction arms are quickly mounted with different brackets for wall, ceiling or table. -AdvantagesCan be wall, bench or ceiling mounted, and connected with ENSHINE filtration systems.ENSHINE extraction arms are easy to adjust for workers wanting to capture fume or dust smoke at source.A wide range of accessories give unlimited possibilities to match the needs at any workplaces and to help extraction work more efficient.Solid structure and easy to be folded out when not in use. -Material VersionsENSHINE extraction arms are available in two material versions, aluminum (AL) and chemical resistant plastic (CR). The choice of material version depends on work environment and type of pollution.Chemical Resistant Plastic (CR)ENSHINE chemical resistant extraction arms are suitable for work areas with special requirements for chemical resistance. The CR extraction arm consists of PVC tubes and joints of red Polypropylene.Aluminum (AL)ENSHINE aluminum extraction arms are suitable for environments with no special demands for chemical resistance or insulation. The AL extraction arm consists of aluminum tubes and joints of red Polypropylene. -ApplicationsENSHINE range of extraction arms covers a wide variety of applications as following.LaboratoryVocational schoolChemical industry UniversityPharmaceutical industry Laser techniquesFood industry Eliminate smoke, gas, dust, and particles
Mobile Filtration (extraction) System-suitable for laboratory/electronics factory air pollution control
Max. Capacity: 25CMM (1020m±/hr)
Power: 1HP
Filters:Three-layers filter:
Pre filters: to capture the larger litters and dust.
Activated carbon filter: 100% activated carbon fibers can effectively filter the unstable organic gas.
HEPA filters (High Efficiency Particulate Air filter): can filter particulates above 0.5µm up to 95%.
We offer a wide range of filter, you can choose others for different applications and processes.
Noise Level:73dB(A)
Damper: Non
Timer: Digital timer with display light
Filter Housing: PP material
Extraction Arm: 3â?? PVC material
Extraction Hood:Ã??180mm, PP material
Cabinet Construction:PP material
Voltage/Frequency:1, 220V, 60HZ
We are pleased to get in touch with you for the supply of those products, any kind of OEM or ODM is available.
