Molecular Weight... 32.065
Appearance... Pale yellow granules
Melting Point.... 112-120
Boiling Point..... 444.6 C
Density...... 1.9-2.1 g/cm3
Solubility in H2O.... Insoluble
Electrical Resistivity.... 0.205 W�·m-1�·K-1
Electronegativity.... 2.58 Paulings
Heat of Vaporization.... 45 kJ mol-1
Specific Heat.... N/A
Thermal Conductivity.... 0.205 W/cm/K
1. Density at 20oC,Kg/m3................ Max 860Â
2. Fraction composition (Distillation):
The product details in the link below
The unit of viscosity used is the Centistoke and the d6 fuel most frequently quoted are listed below in order of cost, the least expensive first :
* IFO 380 â?? Intermediate d6 fuel oil with a maximum viscosity of 380 Centistokes
* IFO 180 Intermediate d6 fuel oil with a maximum viscosity of 180 Centistokes
* LS 380 Low-sulphur (
IOC JET A-1 is a petroleum distillate blended from kerosene fractions having Aromatics
below 20 % v/v, Total sulphur below 0.25 % mass, Mercaptan Sulphur below 0.002 %
mass, freezing point below - 47 0
C and a flash point above 38 0
C. It contains Static
Dissipator additive STADIS 450.
1-Ash content..... 0.14%max
2-Mass fraction of sulphur.... 0.5max
3-Temperature of solidification.... 25� C max
4-Kinematics viscosity.... 118max
5- water content.... 0.5%max
6- Mechanical impurities... 0.1%max
7- Hydrogen sulphide content Hâ??S ppm..... 0.5max
8- Carbon residual.... 7%max
9- Aluminium (Al) ppm.... 5 max
10- silicone (si)..... 12 max
11- sodium (NA).... 15max
12- Asphaltene m/m... 3.6%max
13- lnltial Bolling Point deg.... 216�°C
14- Final Bolling Point deg.... 550C
15- percent recovered.... 78%vol
16- Residual.... 22%vol
17- Total Nitrogen... 0.192%m/m
1- Antioxidant in hydro processed fuel mim/max..... 17/24 Mg/l
2- Antioxidant non hydro processed fuel max.....24 Mg/l
3- Static dissipater first doping ASA-3 max ...... 1Mg/l
4- Stadis 450 max.... 3Mg/l
5- Specific energy, net min.... 18.4 MJ/kg
6- Smoke point max.... 19M/m
7- Luminomitier number max.... 45
8-Naphthalenes max.... 3%volume
8-Total Acidity max... 0.1 MG. KOH/g
9-Aromatic max... 22.0%vol
10-Sulphur Total max... 0.3 %mass
11-sulphur Mercaptan max... 0.003 %mass
12-Recovered residuals max.... 1.5%vol
13-Loss max.... 1.5%vol
14-Flash Point max... 42 Centigrade
15-Density at 15.�°C Min/Max... 776/840 kg / m2
16-Freezing point max.... - 40 Centigrade
17-Corrosion copper (2hrs at 100c) max.... 1
18-Corrosion silver (4hrs at 100c) max.... 1
19- Filter Pressure differential mm.Hg max... 25
20-Tube deposit rating (visual) max....
Density @ 15 C max.... 991 kg/m3
Viscosity @ 50 C max.... 180 mm2/s
Water max... 0.5% (v/v)
Sulphur max... 3.5 % (m/m)
Flash Point min.... 60 0C
Pour Point max... 30 0C
Micro Carbon Residue max... 15 % (m/m)
Ash max.... 0.1 % (m/m)
Total Sediment Potential max... 0.1 % (m/m)
Vanadium max.... 200 mg/kg
Aluminium + Silicon max... 80 mg/kg
Zinc max... 15 mg/kg
Phosphorus max... 15 mg/kg
Calcium max... 30 mg/kg
Nitrogen min. 46%
Moisture max. 0.5%
Prill 90% 1-4 MM max
Biuret 1.00% max.
Granulation 1-3 mm max.
Melting Point 132 �°C
Color Pure white prilled crystal
Free Flowing 100%
Free Ammonia 160 P X T PPM max.
Solubility 100%
Other Free from any harmful substance
