Silway 248 spray adjuvant is a polyether trisiloxane. In aqueous solutions, it gives super spreading and does dramatically reduce surface tension. Typically, Silway 248 spray adjuvant reduces the surface tension of aqueous agricultural mixtures significantly.
At concentrations as low as 0.1 percent, Silway 248 spray adjuvant reduces surface tension below 22 mN/m, which produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves.
Silway 248 spray adjuvant is nonionic in nature, making it useful with a broad range of agrochemical formulations.
Silway 742 silicone water-proof agent is hydrogen silicone oil emulsion, used for roof coating& masonry coating& clay coating& timber coating& other construction material's surface coating.
Silicone water-proof agent have high flexible and mobile siloxane backbone could enable the water repelling methyl groups toorient themselves toward the surface, creating a water-proof " umbrella", and the unique ability of this "umbrella" is excellent breathable.
Silway 742 also have following typical features:
* High spreading and wetting capabilities, this lead to easily thoroughly cover a surface or penetrate a porous substrate
* Permeablity to gas and water vapor
* Resistance to UV(ultraviolet light), heat, and oxidative degeneration
* Durability and mechanical and chemical adhesion
Silway 742 typical application:
* Water-proof coatings for roofs, masonry,clay product, timber and other construction applications
* Water-proof elastomeric coatings for industrial and fashion textiles
* Additives to improve the wash-off resistance of beauty and personal care products
Silway MSO is a multifunctional spray adjuvant developed as a penetrating surfactant concentrate with superior wetting and penetrating characteristics. Silway MSO is designed as a replacement for non-ionic surfactants and crop oil concentrates in liquid spray mixtures.
Silway MSO's typical applications are:
* Crop protection products * Herbicides * Insecticides
* Fungicides * Nutrients and plant growth regulators;
for Non-crop products application:
* Home & garden pesticides * Lawn & ornamental products * Pest control products * Forestry products
Silway 715 water repellent is a water-dilutable solution of potassium methyl siliconate, designed to impact water repellency to a wide variety of surfaces. Supplied at a concentration of 52% in water.
Silway 715 water repellent is usually diluted to a concentration of 3% or less before application. Silway 715 water repellent reacts with carbon dioxide in the air to form an insoluble water-resistant treatment within24 hours.
Silway 715 water repellent could use on bricks sandstone limestone and ceramics to impart a water repellent surface and reduce water absorption.
By reduce water absorption of substrate it help increase the life of substrate, through reduce spall caused by freeze-thaw and efflorescence.
Silway 715 water repellent is colorless and non-yellowing protection preserves the natural appearance of the substrate.
Silway 715 water repellent is not only penetrating and breathable but also low VOC and nonflammable.
Silway 713 water repellent is a water-dilutable solution of sodium methyl siliconate, designed to impact water repellency to a wide variety of surfaces. Supplied at a concentration of 30% in water.
Silway 713 water repellent is usually diluted to a concentration of 3% or less before application. Silway 713 water repellent reacts with carbon dioxide in the air to form an insoluble water-resistant treatment within24 hours.
Silway 713 water repellent could use on bricks sandstone limestone and ceramics to impart a water repellent surface and reduce water absorption.
By reduce water absorption of substrate it help increase the life of substrate, through reduce spall caused by freeze-thaw and efflorescence.
Silway 713 water repellent is colorless and non-yellowing protection preserves the natural appearance of the substrate.
Silway 713 water repellent is not only penetrating and breathable but also low VOC and nonflammable.
Silway 5260 is a 60% actives nonionic emulsion formulated with polydimethylsiloxane.
Silway 5260 used as nonionic emulsion,could be as ingredient in polishes formulations or general purpose release agent because it could provide good gloss and water repellency for car and furniture.
Silway 5260 can be applied to fabric by padding for it could impart softening and lubrication to textiles. And no alkylphenolethoxylates(APEO) contained.
Silway 5260 have excellent emulsion stability could up to 50°C and excellent dilutionstability up to 2% in water.
Silway5260 is white emulsion but with good freeze thaw stability( 5 cycles).
Silway 732 high hydrogen silicone oil water repellent, is a non-toxic and orderless. Could widely apply on powders, glass, ceramic, leather, paper, metal, cement and marble.
Silway 732 water repellent can be converted into film and produce a resilient waterproof coating on various substrates by catalyst at low temperature. Therefore, Silway 732 water repellent has the outstanding property which prevents moisture, mildew and rust.
Besides, Silway 732 water repellent has a high permeability to water vapor, could allow material breathable.
Key Features:
* Reduces water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence,
thereby increasing the life of the substrate
* Non-toxic
* Produces a durable film after curing
* Curing time and curing temperature can be adjusted
* Effective concentration as low as 0.2%
Silway 744 is a water-thinnable, solventless emulsion, based on mixture of silane and siloxane.
Dilute solutions of Silway 744 serve as highquality, general-purpose water repellents for impregnating and priming mineral surfaces.
Moreover Silway 744 can be used for the mass treatment of non-load bearing concrete products.
Dilute Silway 744 is an excellent water repellent for many absorbent mineral substrates, such as bricks, sand-lime brick, natural sandstone and mineral plasters. It is not so suitable for less absorbent, dense natural stone, especially limestone, marble and reinforced concrete for bridges and roads.
Owing to its aqueous consistency and storage stability when diluted, Silway 744 is ideal for inplant impregnation of building materials made of clay, aerated concrete, sand-lime brick, fibrous cement, mineral fibers and lightweight aggregate.
Features:
* Good depth of penetration
* Resistance to alkalis
* Rapid development of water repellency
* Provides good adhesion for paints
* Water based and environmentally friendly
* Stable in storage, even when diluted
Silway 630 is a silicone oil modified by alkyl aralkyl.
Silway 630 could used as a release agent for plastic or rubber components; or used as an external lubricant for rubber parts in mechanical applications; or use as wetting and dispersing agent for pigments and fillers; and also could used as high temperature coating leveling agent
When Silway-630 used as release agent, the produced components should be cleaned,and then painted or glued. Usually, only the surface needs to be cleaned with conventional solvents. Incidental contact between paint components generally does not cause "fish-eye cracks".
However, as with many lubricating oil or grease, if parts coated with a large amount of Silway-630 and not cleaned properly, slight "fish-eye cracks","orange peel like wrinkles" or poor adhesion may occur during painting; before being used in mass production operations, compatibility assessments should be made for the coating or bonding systems used in subsequent processing operations.
Silway-630 is also suitable for wetting and dispersing pigments and fillers in coating leather.
Silway-660 is a long-chain alkylaralkylpolysiloxane. Compared to the traditional polydimethylsiloxane, Silway-660 has many excellent properties.
Used as release agent, Silway-660 is suitable for soft metal (aluminum, zinc, magnesium, etc.) on die casting. The surface of the product is bright, and Silway 660 is not carbonated on the mold surface. Silway 660 does not affect the secondary printing and finishing. Silway 660 typical applicate as release agent.
Key Features:
* Silway-660 will not carbonated on the mold surface, could make the surface of the release product bright.
* Does not affect the secondary printing and finishing.
Silway-680 is rubber tire release agent, it is a water-based, environmental and nontoxic ultra high molecular weight silicone dispersions.
Mainly applied to all kinds of tire mold release, showing superior performance at high temperature, being difficult to decompose and won't transfer to the product, keeping the product in smooth and good shape.
Meanwhile, it does not affect the post-processing.
Silway-680 Key Features:
* Good adhesion, uniform film, molding easily
* Excellent lubrication
* Non-toxic, odorless, non-corrosive, enviromental-friend
* Operation is simple, reliable and could reduce spending
Silway-680 Application:
* Apply to: Tires, Radial tires, Rubber sheet, Rubber mat, Belt hoses. (Dilute 10~30% soild content solution in water, directly use to painting or spray on capsule)
* Apply to: Rubber gloves and other rubber products
* Apply to: Water births, capsules and airbags
Silway APG is a nonionic surfactant of fatty alcohol polyglucoside, which is made from regrowable raw materials - glucose derived from corn, and fatty alcohols from coconut and palm kernel oils.
Due to Silway APG is made from natural raw materials, it is a very mild and easy biodegrade product.
Because Silway APG shows an excellent stability and solubility in highly concentrated salt, alkali and surfactant solution, it can be used as pesticide emulsifier.
Silway 247 spray adjuvant is one kind of polyether modified trisiloxane compounds. In aqueous solutions, it could offer super spreading and does dramatically reduce surface tension. Typically, Silway 247 spray adjuvant reduces the surface tension of aqueous agricultural mixtures significantly. At concentrations as low as 0.1 percent, Silway 247 spray reduces surface tension below 22mN/m, which produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves.
Silway 247 spray adjuvant is nonionic in nature, making it useful with a broad range of agrochemical formulations.
Key Features of SILWAY 247
* Superspreading for exceptional spray coverage of crop and plant surfaces
* Up to 70% spray volume reduction to lower water use and application costs
* Excellent penetration providing better pesticide uptake and efficacy
* Better spray treatment adhesion on crop and plant surfaces
* Rainfastness to lower pesticide wash-off and waste
*Lower use levels than non-silicone surfactants
* Nonionic
Typical Applicatons of SILWAY 247
* Crop protection products
* Herbicides
* Insecticides
* Fungicides
* Nutrients and plants
* Growth regulators
Silway 240 is polyther trisiloxane spray adjuvant. In aqueous solutions, it gives super spreading and does dramatically reduce surface tension. Silway 240 could significantly reduce the surface tension of agricultural aqueous mixtures. At concentrations low as 0.1 percent, Silway 240 spray adjuvant redces surface tension below 22mN/m, which produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves.
Silway 240 spray adjuvant is nonionic in nature, making it useful with a broad range of agrochemical formulations.
7 Key Features:
* Superspreading for exceptional spray coverage of crop and plant surfaces
* Up to 70% spray volume reduction to lower water use and application costs
* Excellent penetration providing better pesticide uptake and efficacy
* Better spray treatment adhesion on crop and plant surfaces
* Rainfastness to lower pesticide wash-off and waste
* Lower use levels than non-silicone surfactants
* Nonionic
Typical Applications:
* Crop protection products
* Herbicides
* Insecticides
* Fungicides
* Nutrients and plant
* Growth regulators
Silway 714 water repellent is a water-dilutable solution of potassium methyl siliconate designed to impart water repellency to a wide variety of surfaces. Supplied at a concentration of 42 percent in water.
Silway 714 water repellent reacts with carbon dioxide in the air to form am insoluble water-resistant treatment within 24 hours.
KEY FEATURES:
* Reduce water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate.
* Colorless and non-yellowing protection preserves the natural appearance of the substrate.
* Penetrating and breathable
* Low VOC
* Nonflammable