Frame fence net is a product with very flexible assembly. It is widely used in road and railway fences. It is a product with very flexible assembly. It is widely used in roads, railways, bridges, highways, etc. in China. It can be made into a permanent mesh wall or used as a temporary isolation network, which can be realized by adopting different post fixing methods.
Specifications:
Mesh (mm): 75x150
Mesh (mm): 1800x3000
Frame (mm): 20x30x1.5
Mesh dipping (mm): 4.8
Column size (mm): 48x2x2200
Overall bending: 30
Bending length (mm): 300 column embedded (mm): 250-300
Column spacing (mm): 3000 Embedded foundation (mm): 500x300x300 or 400x400x40
Product advantages: beautiful, durable, non-deformable, and quick to install. It is an ideal metal mesh wall and has been widely used in various industries.
Features
1) Large sound insulation: The average sound insulation is 36dB.
2) High sound absorption coefficient: the average sound absorption coefficient is 0.85.
3) Weather resistance and durability: The product has water resistance, heat resistance, UV resistance, and will not reduce performance or abnormal quality due to changes in rain temperature. The products are made of aluminum alloy coils, galvanized coils, glass wool, and H-steel columns. The anticorrosion period is more than 30 years.
4) Beautiful: A variety of colors and shapes can be combined to coordinate with the surrounding environment to form a beautiful landscape.
5) High strength: Considering the different climatic conditions in various regions of our country, the wind load is fully considered in the structural design. Using 1.2mm galvanized sheet, through the automatic production line, the groove is pressed to increase the strength, so that the product can withstand 10-12 typhoons, and withstand pressure of 300.
6) Waterproof and dustproof: The louver type is designed with full consideration of waterproof and dustproof. Its angle is set to 45�°, and its sound absorption will not be affected in a dusty or rainy environment. Dust drainage and drainage measures have been installed in the structure. Avoid water accumulation inside the components.
7) Durable: The product design has fully considered the wind load of the road, the collision safety of traffic vehicles and the open-air corrosion protection in the whole climate. The product adopts aluminum alloy coil, galvanized coil, glass wool, and H steel post with galvanized surface treatment. The company guarantees that the products will not corrode, change shape, sound absorption and sound insulation effects within 30 years
Specifications: 1.4mm-5mm
1. Pressure welding
Grille
Flat steel: The material is Q235A or stainless steel, there are ordinary plane type, non-slip tooth type and section I type. Common specifications are 20*5, 25*5, 25*3, 32*5, 32*5, 40*5, 40*3, 50*5, 65*5, 75*6, 100*8, 100*10 Wait.
2. Pressure welding
Grille
Crossbar: Round steel, twisted square steel, square steel or hexagonal steel made of Q235A or 304 stainless steel. Twisted square steel is made by drawing and twisting the coil through a square die. Its common specifications are 5*5, 6*6, 8*8mm, etc.
The quality of the galvanized layer can be evaluated by the weight of the zinc plated on the substrate, the bonding force between the galvanized layer and the substrate, and the uniformity of the coating. The uniformity of the zinc layer is an important quality indicator of the zinc coating. In general, the corrosion always starts at the thinnest part of the zinc layer and spreads around, resulting in rust, broken wires and affecting the service life. For the coating weight and bonding strength, each standard has clear regulations, but the uniformity is different. In the 1970s, the ISO standard and the standards of various countries in the world generally stipulated that the copper sulfate test should be used for inspection. By the 1980s, with the exception of Japan and the former Soviet Union, ISO standards and standards around the world no longer adopted this method. Although our country has retained this method in some standards such as GB/T15393-94 "Steel wire galvanized layer" in the form of "can be carried out by mutual agreement", most of them are no longer adopted. However, the old zinc coating uniformity detection method has been abandoned but no corresponding new methods have been established. In addition, there is no uniform definition and requirement for uniformity, so that some producers do not monitor and detect the uniformity of the coating well. , So as to affect the further improvement of product quality
Place of Origin: Hebei Province, China
Manufacturer: Honorwin
Wire diameter: 1.6mm or more
MOQ: Two tons
Sales Scope: Worldwide
Support shipping method: sea
