Water filter replacement activated carbon filter cartridge is the second filter cartridge of 3-stage drinking water filter replacements, it is a type of slim carbon block filter with threaded or double O-ring end caps, varies of sizes and end caps available.
Specification
STRUCTURE
Water filter replacement activated carbon filter cartridge is the second filter cartridge of 3-stage drinking water filter replacements, it is a type of slim carbon block filter with threaded or double O-ring end caps. The usual OD is 48mm and length 263mm or 295mm, also can be assembled as core of in-line filters, other customized sizes and end cap options available.
FEATURES
Smaller size
Compatible with Doulton sized filters
High CTO reduction
Food grade material
MAIN TECHICAL SPECIFICATION
Connection: threaded or double O-ring nipple
Maximum operating Pressure: 0.5MPa (72.5psi)
Maximum temperature: 60â??(140â??)
Maximum flow rate: 2L/M (0.53G/M)
Measurements: 48X263mm, 48X295mm
TYPICAL APPLICATIONS
CB Pre-filter replacement cartridge
Second stage of 3-stage water filter replacement
Color, taste, odor reduction
Chlorine reduction
4.5" diameter UDF GAC granular activated carbon filter cartridges are also known as large diameter and big blue filter cartridges, this type is refillable with standard size of 4.5"x10" and 4.5"x20", compatible with most standard big blue filter housings, the carbon is NSF certified coconut shell carbon.
Specification
4.5" diameter UDF GAC granular activated carbon filter cartridges are also known as large diameter and big blue filter cartridges, this type is refillable with standard size of 4.5"x10" and 4.5"x20", compatible with most standard big blue filter housings, the carbon is NSF certified coconut shell carbon. Good at removal of disinfection by-product like chloroform and THMs. Suitable for areas using surface water as source water and chloramine as disinfectant.
Features
NSF Certified coconut shell activated carbon
High effect on chlorine and organic pollutants
Low turbidity from carbon dust
Refillable design
Technical data
Maximum temperature: 140F (60C)
Maximum flow rate per 10: 4gpm (15.14L/min)
Capacity: 25,000 gallons - 6 months
Caution: Flush for 30 seconds before use. Do not exceed
the maximum flow rate to maintain sufficient contact time.
RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media in between, it removes sediments as well as organic pollution from water.
Specification
RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media (usually GAC) in between, it removes sediments as well as organic pollution from water. Compare to traditional UDF filter, RFC filter provides higher flow rate and better sediment reduction.
Features
NSF Certified activated carbon
High flow rate
Low pressure drop
Rapid dechlorination
Technical data
Maximum temperature
4 stage UV water purifier is a new design of SF Filter, it has 3 filter housings and one ultraviolet lamp, with cartridge combination of sediment filter, UDF carbon filter and CTO carbon filter, effectively reduces and eliminates sediments, organic pollutants, free chlorine, bacteria and virus, etc.
Specification
4 stage UV water purifier is a new design of SF Filter, it has 3 filter housings and one ultraviolet lamp, with cartridge combination of sediment filter, UDF carbon filter and CTO carbon filter, effectively reduces and eliminates sediments, organic pollutants, free chlorine, bacteria and virus, etc.
Features
Eliminating 99.99% bacteria and virus
Activated carbon filter reduces free chlorine
Easy install and replacement
New design filter housings
Filter stages
Sediment filter- string wound filter cartridge
Carbon filter- UDF activated carbon cartridge
Carbon filter- CTO carbon block cartridge
UV lamp- 12 Watts UV lamp
Round disc-like filter paper made of PP or wood pulp, usually for plating industry.
We provide filter paper for electro-plating processing. Our product is chosen by Kuobao, Mefiag and Mikawa for there chemical filter systems.
NSF certified string wound filter made of washed string, JIS standard micron rates. Swirling flow.
STRUCTURE
String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. JP series has straight multi-holes from surface to the inner core, allowing maximum dirt holding capacity and lowest pressure drop. The holes are now with slope design (25micron -200micron), creating swirling flow in the filter housing, which prevent particles from settling at the bottom and provide more benifits to the water.
The whole JP washed series filters has been certified by NSF to the standard of NSF/ANSI 42.
FEATURES
1 NSF listed for ANSI 42 standard
2 Through slope holes create real depth filtration and swirling flow
3 Large flow and small pressure loss
4 High dirt holding capacity and long service life.
5 Pure, clean and washed material, no silicon, no fluorescence agent and no oil.
MAIN TECHICAL SPECIFICATION
1 Dimension: Outer diameter: 63�±1mm, Inner diameter :28mm or 30mm
2 Maximum operating Pressure: 0.5MPa (72.5psi)
3 Temperature: 60 degrees (140 degrees fahrenheit )
TYPICAL APPLICATIONS
1 Residential water filter
2 Food & Beverage
3 Pre - RO
4 Pharmacy & Hospital
5 High quality industrial liquid filtration
6 Other applications
SF patented string wound high flow type, with OD 6.22" and 1 to 100 micron range.
STRUCTURE
High Flow string wound filter is patented in China by SF Filter. Using multi-holes to make the filter 9 times dirt holding capacity as ordinary string wound cartridges. With O-rings to avoid bypass. 3 grades are available. HFA, HFB and HFC can meet most pre-filtration requirements.
The end cap and dimensions can be customized to meet certain requirments.
FEATURES
1 High dirt holding capacity, long service life
2 No bypass
3 Easy replacement
4 Through holes create real depth filtration
5 High flow rate and low pressure loss
6 Pure, clean and washed material which is same as NSF approved type (HFA).
7 Pure material, suitable for strong corrosion liquids (HFB).
8 Common material, allows lower price (HFC).
MAIN TECHICAL SPECIFICATION
1 Dimension: Outer diameter :158�±1mm, Inner diameter:70mm
2 Maximum operating Pressure: 0.5MPa
3 Maximum operating Pressure Drop: 0.2MPa
4 Temperature: 60 degrees
TYPICAL APPLICATIONS
1 Food & Beverage (HFA)
2 Pharmacy & Hospital (HFA)
3 Pre - RO (HF A & HFB)
4 Industrial liquid filtration
5 Other applications
String wound filter made of pure material and JIS micron rates.
STRUCTURE
String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. JPL series has straight multi-hole from surface to the inner core, which performance a maximum dirt holding capacity and lowest pressure drop.
FEATURES
1 Through holes create real depth filtration
2 Large flow and small pressure loss
3 High dirt holding capacity and long service life.
4 Pure material
MAIN TECHICAL SPECIFICATION
1 Dimension: Outer diameter: 63�±1mm, Inner diameter:28mm or 30mm
2 Maximum operating Pressure: 0.5MPa
3 Temperature: 60 degrees
TYPICAL APPLICATIONS
1 Industrial liquid filtration (High quality PCB & Electro-plating)
2 Strong acid and alkali liquid
3 Syntheti resin & paint
4 Pre - RO
5 Other applications
Carbon block filter made of NSF certified coconut carbons.
Specification
POU- point of use
This series of filters can be used for drinking, municipal, and industrial water and liquids filtration, it is designed for Direct-food-related applications, to treat the water intended for direct consumption (drinking and cooking).
Features
1 NSF certified coconut based granular activated carbon
2 High efficiently bound by food grade binder
3 95% initial dechlorination
4 Long service life
5 Low pressure drop
6 All virgin raw material
Technical data
1 Maximum temperature: 140 degrees
2 Maximum flow rate per 10 inch: 1.06gpm (4L/min)
3 Maximum replacement : 14.5psi (1.0bar)
4 Caution: Flush for 30 seconds before use. Do not exceed the maximum flow rate to maintain sufficient contact time.
Melt blown (spun polypropylene) filters with 50% lower pressure drop and long service life.
Specification
STRUCTURE
Depth melt-blown filter cartridge is made of pure polypropylene, by phase-in changes on the precision from inside to outside, it maximizes the dirt holding capacity and minimizes the pressure loss. Results in very long service time.
FEATURES
1 High Dirt Hoding Capacity
2 50% Lower Pressure Drop
3 Long Service Life
TYPICAL APPLICATION
1 Water Treatment
2 Corrosive Liquid Filtration
3 Food Industrial
CM series GAC filter is made of catalytic activated carbon, it can remove chloramine and hydrogen sulfide from water effectively. It's also good at removing disinfection by-products such as chloroform and trihalomethanes (THMs).
Specification
CM series GAC granular carbon filter is made of catalytic activated carbon, it removes chloramine and hydrogen sulfide effectively, also good at removal of disinfection by-product like chloroform and THMs. Suitable for areas using surface water as source water and chloramine as a disinfectant.
Features
NSF Certified catalytic activated carbon
High effect on chloramines, sulfide,and trihalomethane
Low turbidity from carbon dust
Rapid dechlorination
Technical data
Maximum temperature: 140F (60C)
Maximum flow rate per 10: 1.06gpm (4L/min)
Caution: Flush for 30 seconds before use. Do not exceed the maximum flow rate to maintain sufficient contact time.
Spin down type sediment filter (pre-filter), with self washing vent valve, brass head, 1/2", 3/4", 1" NPT port options, and 40 micron stainless steel filter.
Specification
STRUCTURE
Pre-filter / Spin down water filter is suitable for wholehouse water treatment, works as pre-filter for all water consumption of a home. It is made of brass cap with standard in-let and out-let options of 1/2", 3/4", and 1" NTP threads with SUS 316 stainless steel filter and clear housing, with a vent valve on its bottom for self-washing purpose.
FEATURES
Small size
Visible housing
Easy to install to standard pipes
Self washing, no filter replacement cost
High flow rate
MAIN TECHICAL SPECIFICATION
Connection: 3/4", 1/2" and 1" threaded NPT
Maximum operating Pressure: 0.8MPa (116psi)
Working temperature: 5-40 (41-140)
Maximum flow rate: 2.6-4.2m³/h
Measurements: 60*90*200mm
Pore size: 40-60 micron
TYPICAL APPLICATIONS
Pre-filter for wholehouse water supply
Pre-filter for solar water heater
Pre-filter for well water and river water
This faucet filter cartridge is a replacement cartridge of faucet filter system, it combines UF filter and activated carbon filter to remove chlorine and bacteria from tap water.
Specification
Faucet water filter cartridge is the replacement cartridge of faucet-mount filter, this cartridge filter combines UF membrane filtration and activated carbon purification, which removes free chlorine, odor, sediments, and bacteria from tap water.
Features
UF membrane filters out 99.99% of bacteria
Activated carbon filter reduces free chlorine
Easy replacement
Long service life
Technical data
Temperature: 40-100F (5-38C)
Flow rate: 0.4gpm (1.5L/min)
Service life: 400G (1,500L) or 3 months
Spin down type sediment filter (pre-filter), with self washing vent valve, brass head, 1/2", 3/4", 1" NPT port options, and 40 micron stainless steel filter.
STRUCTURE
Pre-filter / Spin down water filter is suitable for wholehouse water treatment, works as pre-filter for all water consumption of a home. It is made of brass cap with standard in-let and out-let options of 1/2", 3/4", and 1" NTP threads with SUS 316 stainless steel filter and clear housing, with a vent valve on its bottom for self-washing purpose. Manufactured in China.
FEATURES
Small size
Visible housing
Easy to install to standard pipes
Self washing, no filter replacement cost
High flow rate
MAIN TECHICAL SPECIFICATION
Connection: 3/4", 1/2" and 1" threaded NPT
Maximum operating Pressure: 0.8MPa (116psi)
Working temperature: 5-40â??(41-140â??)
Maximum flow rate: 2.6-4.2m�³/h
Measurements: 60*90*200mm
Pore size: 40-60 micron
TYPICAL APPLICATIONS
Pre-filter for wholehouse water supply
Pre-filter for solar water heater
Pre-filter for well water and river water
High Flow pleated filter cartridge with 6" diameter and different end caps, usual lengths are 40" and 60", absolute rated 0.5micron, 1micron, 5micron, 10micron, 20micron, 50micron and 100micron, it's used as high capacity sediment filter for desalination and industrial applications.
Specification
MAIN TECHNICAL SPECIFICATION
Maximum operation temperature:
Glass fiber: 121C
PP: 82C
Maximum pressure drop:
Glass fiber: 3.4bar at 121C
PP: 3.4bar at 82C
Recommended replacing pressure drop:
2.4Bar at 20C
Suggested maximum flow of water:
20 inch: 660LMP
40 inch: 1300LMP
60 inch: 1900LMP
TYPICAL APPLICATION
Pre-filtration of RO, Pretreatment of sea water desalination
Condensate water filtration, hot water recovery in power generation
API, solvents and water filtration in Bio-Pharm market
The filtration of bottled water, high fructose food oil, soft drinks and milk
Paints and coatings, petrochemical, refineries
Microelectronics, film, fiber and resin.
MCB series molded carbon block filter is made of PAC (powdered activated carbon) and polyester fiber, with high adsorbtion capacity and long service life. Molded blocking method results in lower carbon fine release and higher efficiency.
Specification
Comparing to traditional carbon block filters, molded blocking method makes it possible to bind PAC and polyester fiber together, capacity of adsorbtion is upgraded dramatically with the same cartridge size. MCB series filters can be used for drinking, commercial, and industrial water and industrial liquids purification, with standard sizes of 2.5"x10", 2.5"x20", 2.5"x30" , 2.5"x40", 4.5"x10" and 4.5"x20".
FEATURES
Molded block method
Ultra high adsorbtion efficiency
Long service life
Low pressure drop
TECHNICAL DATA
Maximum temperature: 39.2-176 F (4-80 C)
Recommend flow rate per 10 1.06gpm (4L/min)
Maximum replacement p: 14.5psi (1.0bar)
Service life per 10 5000G 1GPM
Pressure drop:
Filter housings or cases made of 316L or SUS304 stainless steel, cartridge filter type filter housing, bag filter type filter housing, single or multiple filters.
Specification
Filter housings or cases made of 316L or SUS304 stainless steel, cartridge filter type filter housing, bag filter type filter housing, single or multiple filters. The filter can be cartridge filter, bag filter, HF high flow filters etc.
String wound filters using cotton or polyester string, stainless steel core, usually for cooking oil filtration.
STRUCTURE
String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. JP cotton & PE series has straight multi-hole from surface to the inner core, which performance a maximum dirt holding capacity and lowest pressure drop.
FEATURES
1 Through holes create real depth filtration
2 Higherflow and lower pressure loss
3 High dirt holding capacity and long service life.
4 Cotton or polyester yarn and ss core which bare higher temperature
MAIN TECHICAL SPECIFICATION
1 Dimension: Outer diameter:63�±1mm, Inner diameter: 28mm or 30mm
2 Maximum operating Pressure: 0.5MPa
3 Temperature: Cotton 150 degrees, PE 130 degrees.
TYPICAL APPLICATIONS
1 Cooking oil, palm oil, soy sauce (cotton or PE)
2 Organic solvents (cotton only)
3 Petroleum product (cotton only)
4 Other applications
Filter bags made of PP or PE, 0.5-100 microns, size P1S, P2S, P3S, P4S and customized sizes with plastic or metal ring, processed by sewing, ultrasonic or hot wind welding.
TDS meter is a tester measures total dissolved solids(minerals, salts or metals) in water, TDS-3 has one screen and three buttons on its face, one clip on its back, very simple to use and carry. Comes with a leather case to protect it from damages, ideal for home and commercial water quality checking and monitoring.
Specification
TDS meter is a water quality tester measures total dissolved solids(minerals, salts or metals) in water, TDS-3 has one screen and three buttons on its face, one clip on its back, very simple to use and carry. Comes with a leather case to protect it from damages, ideal for home and commercial water quality checking and monitoring.
Features
Hold function saves readings
Auto-off turns off in 10minutes to save batteries
Factory calibrated
Customised label and logo
Technical data
Testing Range: 0-999ppm
Accuracy: 2%
Battery: 2x1.5V(button cell)
FRP filter tank is commonly used as vessel of sand filter, carbon filter and ion exchange filter. We provide various of standard sizes in different color options at competitive cost.
Specification
FRP filter tank is commonly used as vessel of sand filter, carbon filter and ion exchange filter. We provide various of standard sizes in different color options at competitive cost.
RO membrane element for POU household water filter systems, replacement RO membrane element for water purifier, manufactured in China, widely selling to US and Europe.
Specification
1812 series RO membrane element is designed for household water filter system, with 50G and 75G product water options and universal standard size.
Features
Universal standard
Long service life
Reliable high rejection rate
In-line filter cartridges with quick-connection, push-fit connection or threaded connection and the core can be string wound, melt blown, GAC, carbon block or mineral balls, usually use as pre and post filter for RO systems.
Specification
STRUCTURE
In-Line Filter Cartridge is suitable for RO systems, work as pre-filter or post filter. It is made of PP shell with standard in-let and out-let optinos- quick-connect, push-fit and threaded NTP connection. The inner filter can be carbon block, string wound, pp melt blown, carbon granules and mineral balls.
FEATURES
Quick connection
Easy replacement
High pressure resistance
Smaller size
Food grade
Main Technical Specification
Connection: 1/4" and 1/2" quick connection (push-to-fit), threaded NPT connection
Maximum operating Pressure: 0.5MPa (72.5psi)
Maximum temperature: 60â??(140â??)
Maximum flow rate: 2L/M (0.53G/M)
Bursting pressure: 2.0Mpa (290psi) Maximum service life: 1000G or 6 months for pre-filter, 2000G or 12 months for post-filter T33
Measurements: 285x62mm for pre-filter, 265x50mm for post-filter T33
TYPICAL APPLICATIONS
Pre & post RO
Drinking water treatment
Refridgerator filter replacement Houshold and commercial water purifier filter replacement
Odor, color, free chlorine, organic objects reduction and weak alkalinity
Water filter designed for boat, ship and RV, with UF membrane, granular activated carbon and mineral balls to eliminate bacteria, remove reduce odor, taste and organic pollutants, and mineral balls to adjust pH and raise minerals for the distilled water. With 3 4 universal inlet outlet ports, easy to be installed, replaced or removed, and metal housing well adapt to impacts in moving kitchens of vehicles, boats and ships.
Specification
STRUCTURE
Water filter designed for boat, ship and RV, with UF membrane, granular activated carbon and mineral balls to eliminate bacteria, remove or reduce odor, taste and organic pollutants, and mineral balls to adjust pH and raise minerals for the distilled water. With 34 universal inlet and outlet ports, easy to be installed, replaced or removed, and metal housing well adapt to impacts in moving kitchens of vehicles, boats and ships..
FEATURES
Universal connection
Easy instal, replace and remove
Impact resistance
99.99 bacterial removal, odor removal, pH adjustment
Food grade
MAIN TECHICAL SPECIFICATION
Connection 14 threaded male and female NPT connection
Maximum operating Pressure 0.5MPa 72.5psi
Maximum temperature 60140
Maximum flow rate 2L M 0.53GM
TYPICAL APPLICATIONS
RV drinking water filtration
Marine boat water filtration
Ship distilled water filtration
Odor, color, free chlorine, organic objects reduction and weak alkalinity
Faucet water filter or faucet-mount water filter is a small filter system attaches to tap, it has two-way outlets, one for filtered water the other for tap water.
Specification
Faucet water filter is also called tap water filter or faucet-mount water filter, which is small filter system attaches to tap, it has two-way outlets, one for filtered water the other for tap water, different combination of cartridge can be used, for example cartridge filter combines UF membrane filtration and activated carbon purification, which removes free chlorine, odor, sediments, and bacteria from tap water.
Features
UF membrane filters out 99.99% of bacteria
Activated carbon filter reduces free chlorine
Easy install and replacement
With date indicator
Technical data
Temperature: 40-100F (5-38C)
Flow rate: 0.4gpm (1.5L/min)
Maximum pressure: 58psi (0.4Mpa)
Service life: 400G (1,500L) or 3 months
Faucet water filter or faucet-mount water filter is a small filter system attaches to tap, it has two-way outlets, one for filtered water the other for tap water.
Specification
Faucet water filter is also called tap water filter or faucet-mount water filter, which is small filter system attaches to tap, it has two-way outlets, one for filtered water the other for tap water, different combination of cartridge can be used, for example cartridge filter combines UF membrane filtration and activated carbon purification, which removes free chlorine, odor, sediments, and bacteria from tap water.
Features
UF membrane filters out 99.99% bacteria
Activated carbon filter reduces free chlorine
Easy install and replacement
With date indicator
Technical data
Temperature: 40-100F (5-38C)
Flow rate: 0.4gpm (1.5L/min)
Maximum pressure: 58psi (0.4Mpa)
Service life: 400G (1,500L) or 3 months
RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media (usually GAC) in between, it removes sediments as well as organic pollution from water.
Specification
RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media (usually granular activated carbon) in between, it removes sediments as well as organic pollution from water. Compare to traditional UDF filter, RFC filter provides higher flow rate and better sediment reduction.
Available sizes: 2.5"x10", 2.5"x20", 4.5"x10" and 4.5"x20"
Micron rates: 1micron, 5microns and10microns
Features
NSF Certified activated carbon
High flow rate
Low pressure drop
Rapid dechlorination
Technical data
Maximum temperature: 140�°F (60�°C)
Maximum flow rate per 2.5"x10â??: 2.12gpm (8L/min)
Size otpions: 2.5"x10", 2.5"x20", 4.5"x10", 4.5"x20"
Caution: Flush for 30 seconds before use. Do not exceed
the maximum flow rate to maintain sufficient contact time.
