Battery Monitoring Module BMS100 can be used in various industrial automation measurement and control systems. It can measure 4-20mA and 0-5V transducer signal of pressure, temperature,current,etc.It can measure server room battery management and voltage of each battery in each group.
1.Acquisition 2/4 channels of analog input 4 ï½? 20mA, 0 ï½? 5V, optional;
2.Adopt 12-bit AD acquisition processing, high accuracy measurement;
3.Standard Modbus-RTU protocol;
4.RS-485 (RS-422 optional) communication interface with ESD protection circuit;
5.Wide working voltage DC9 ï½? 36V, with anti-reverse protection function ;
6.Using industrial-grade chip, built-in watchdog, and has perfect anti-lightning and anti-interference measures to ensure reliability;
7.Configurable maximum and minimum value of analog input, intelligent conversion of actual value, convenient for various analog measurement requirements;
8.Can measure 12 single battery voltages,several battery group and 1 total voltage;
9.It has 3 precision gears for different voltage ranges to improve the voltage measurement accuracy;
10.With LED light to indicate working status, easy to install and debug on site.
The Cellular Electricity Power IoT RTU is a powerful smart meter used for power internet of things solution, is special using for remote monitoring 100~400VAC of 3-Phase electricity power distribution safety and measurement, can measuring the 3-phase 3-wire, 3-phase 4-wire distribution power voltage, current, factor, watts, frequency, apparent power, active power, reactive power, active energy, reactive energy. Also, it provides Dual SIM, 2 digital inputs, 2 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, also 1 RS485 for extend I/O to monitoring oil level and temperature or read meters.
1. Can be operated from anywhere, no distance limitation;
2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside.
3. 3G/4G/NB-IoT Modules are optional, LCD Display is optional;
4. Modular design, can easily upgrade the cellular module if network upgrade;
5. Embedded ARM�® Cortexâ?¢-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with anti-jamming and in-built watchdog;
6. High isolate voltage, current and voltage input signal isolated by accuracy transformer, afford arrive DC2500V;
7. Working Voltage: 60~500VAC or 70~800VDC;
8. 3-phase 3 wires or 4 wires power parameter measurement, include voltage, current, factor, watts, frequency, apparent power, active power, reactive power, active energy, reactive energy, phase loss;
9. Measurement range: AC100~400VAC, currant range: 5A, other range should use CT;
10. 2 digital inputs, compatibles dry and wet contact, 2 relay output (5A/30VDC, 5A/250VAC), compatibles pulse outputs;
11. 1 ambient sensor input for monitoring onsite temperature and humidity ;
12. 1 RS485 port, supports Modbus RTU Master and Slave, can be used to extend I/O ports or meters;
13. Provides 1 channel DC power source output for external device, saving wiring cost;
14. Each parameter can setup threshold, when exceed or recovery will alarm immediately;
15. Can monitoring phase loss, when occurs will alarm immediately.
16. Inbuilt inter-lock logic programmer and powerful timer program function.
17. Resend the data while communication failure and alert to users by SMS;
18. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications;
19. Supports Modbus TCP, Modbus RTU protocol and transparent transmission, can be used as master and slaves, can integrate to SCADA, HMI, DSC directly;
20. Supports USB setting, reading, records inquiry and firmware upgrade;
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
Supports 10 user numbers for receiving device daily reports, dropped calls, serial port data overrun, and specific SMS alarm messages triggered abnormally;
Built-in powerful timer function, support timing automatic reporting, timing SMS daily report, timing online, timing restart and other functions;
Modbus TCP protocol and Modbus RTU protocol are compatible with transparent transmission;
Ethernet comes with a transformer isolator, 2KV electromagnetic isolation, and shell isolation protection;
Adopt time division multiplexing, multi-channel mounting, less interference, more mounting nodes, can support up to 99 temperature and humidity collection points
It can monitor the terminal battery level in real time to ensure that the device data does not drop.
The GSM 3G 4G LTE Phase Loss Monitoring Alarm is special for remotely monitoring onsite temperature, humidity,AC power, power status through wireless GSM/3G/4G Network. When the 3/Single phase power failure, power voltage or temperature, humidity exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately. Supports SMS,GPRS,3G,4G Lte Cellular Networks. Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
1. Can be operated from anywhere, no distance limitation;
2. No call charges for inquiry. the GSM 3G 4G LTE Phase Loss Monitoring rejects the call from authorized number then return onsite temperature, humidity,AC power status and power voltage on the first 'ring';
3. Multiple applications. (3/Single phase status, power status, solar panel, dc voltage,temperature, humidity);
4. Up to 10 authorized phone numbers, 5 can be used to receive SMS,and 5 can be used to call and SMS while alarm occurrence;
5. 1 input for Temperature & Humidity,AC power status monitoring;
6. External AC Power status monitoring, AC ON/OFF will send SMS to authorized phone numbers;
7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 0-36VDC, no need additional sensor to save cost;
8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers;
9. Support remotely read historic data via SMS;
10. Support Modbus TCP and Modbus RTU over TCP protocol for cloud monitoring;
11. Rechargeable Backup Battery inside can last 8hours;
12. Secure - Using caller ID and password for identification, unknown callers are ignored;
13. Programmable by SMS Commands or APPs with password protection;
14. Based on GSM/3G/4G Network, applied to many applications.
15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
KPIIOT (King Pigeon Industrial Internet of Things Cloud Platform) is a million-level access industrial IoT cloud platform. The scientific architecture design can quickly and cost-effectively realize the customer's demand for customized cloud platform and meet the customer's customer demand for cloud platform customization.
The GSM 3G 4G LTE Environmental Monitoring Alarm is special for remotely monitoring onsite temperature,humidity,power status through wireless GSM/3G/4G Network.When the temperature,humidity, power voltage exceed high threshold or low threshold value,will send SMS alert to upto 10 preset mobile phone immediately,It supports Modbus TCP and Modbus RTU Over TCP,can be integrated to Cloud Platform.
1. Can be operated from anywhere, no distance limitation;
2. No call charges for inquiry. the GSM 3G 4G LTE Environmental Monitoring Alarm,rejects the call from authorized number then return onsite temperature, humidity, and power voltage on the first 'ring';
3. Multiple applications. (temperature, humidity, power status, solar panel, dc voltage);
4. Up to 10 authorized phone numbers, 5 can be used to receive call or SMS,and 5 can be used to call and SMS while alarm occurrence;
5. One Temperature & Humidity sensor input, measures temperatures from -40-80�°C,0.5�°C accuracy, Relative Humidity from 0-99RH%, accuracy is 3%;
6. External AC Power status monitoring, AC On/OFF will send SMS to authorized phone numbers;
7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 9-24VDC, no need additional sensor to save cost;
8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers;
9. Support remotely read historic data via SMS;
10. Support Modbus TCP and Modbus RTU Over TCP protocol for cloud monitoring;
11. Rechargeable Backup Battery inside can last 8hours;
12. Secure - Using caller ID and password for identification, unknown callers are ignored;
13. Programmable by SMS Commands or APPs with password protection;
14. Based on GSM Network, applied to many applications.
15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
The Cellular IoT Gateway provides 1 ambient sensor input for monitoring onsite temperature and humidity,supports dual sim card,with 2 RS485 serial port, supports 320 extend I/O tags via Modbus RTU protocol. It can monitoring and operates the RS485 ports and extend I/O tags by SMS, APP, Web Server, internet.Supports SMS,GPRS,3G,4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
1. Can be operated from anywhere, no distance limitation;
2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside.
3. 3G/4G/NB-IoT Modules are optional;
4. Modular design, can easily upgrade the cellular module if network upgrade;
5. Embedded ARM�® Cortexâ?¢-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog;
6. Wide range power supply 9~36VDC with over voltage and phase-reversal protection;
7. 1 ambient sensor input for monitoring onsite temperature and humidity;
8. Resend the data while communication failure and alert to users by SMS;
9. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications.
10. Supports Modbus TCP protocol, can integrate to SCADA,HMI,DSC directly.
11. 2 RS485 port supports Modbus RTU Master and Slave, can be used to extend I/O ports or meters;
12. Supports SMS Alert when I/O triggered or recovery, and external power lost or recovery;
13. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost;
14. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message.
15. Inbuilt 8G SD card to save up to 100000 historical data and events;
16. Inbuilt large capacity automatically rechargeable backup battery;
17. Industrial class design suitable for long time work applications;
18. using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
19. L70 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The PLC Gateway D225 is a converter for converting the data protocol of Mitsubishi PLC into Modbus TCP RTU protocol. The D225 can store the I/O data of the PLC to the gateway through the RS-232 or RS-485 serial port of Mitsubishi PLC. The gateway transmits the data to the cloud platform through the Modbus protocol, and also allows your software to pass through the local area network anywhere. Or Internet access to serial port devices.
1.Built-in industrial grade ARM CortexTM core, high performance, low power consumption, stable and reliable.
2.Converting the data protocol of Mitsubishi PLC into Modbus
TCP protocol,then connect to cloud. Support 1 channel RS-232, 1 channel RS-485 and 1
channel TTL.
3.Support 1 channel RJ45 Ethernet port
4.Support RESET button to restore factory function (long press for 3 seconds to recover) to prevent parameter setting error.
5.Using metal shell material, protection grade IP30, metal shell and system safety isolation, especially suitable for industrial control applications.
6.Using configuration software to set device parameters, support WIN XP, WIN 7, WIN 8 and WIN 10, friendly interface.
7.Support static IP address or DHCP to obtain IP address automatically, and query the devices in the network through UDP broadcast protocol.
8.Support local HMI touch screen and remote simultaneous access to PLC for data acquisition and monitoring.
9.Support server domain name resolution. Support firmware upgrade through TTL, firmware update is more convenient.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure itâ??s reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Power supply 12~36VDC with over voltage and phase-reversal protection;
3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols;
4. DO1 support PWM output;
5. Management and configuration via LAN connection configuration software for easy operation and maintenance;
6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter;
7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;
9. High sampling frequency and special filtering strategy to ensure reliability;
10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules;
11.Supports register mapping function and extend I/O inquiry strategy;
12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The IoT10 Series wireless temperature and humidity IoT sensor are low power comsuption design,it is a wireless Internet of things gateway, designed for converting DS18B20 Temperature sensor signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.Widely used to real time remotely monitoring temperature of Refrigerator freezer, chicken factory, chemical plant, food production and storage, warehouse, hospital etc.
1. Can be used as a complete product or as a secondary development module;
2. Two working modes are available:
Normal mode: Real-time data transmission,Users can inquiry the real-time status;
Low power consumption mode: Ultra low power consumption(ï¼?230uA);
3. Multiple communication methods:GSM,GPRS,3G,4G,NB-IoT,LoRa,Ethernet,etc;
4. Coverting DS18B20 temperature probe signal to cloud platform over cellular network;
5. Support configure parameters and query real-time data via SMS,software,cloud platform;
6. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message;
7. Support two different server centers,can set IP address or domain name ;
8. Support Modbus RTU over TCP and MQTT protocol;
9. Wide range power supply 7~24VDC with phase-reversal protection;
10. Using Nano sim card,support PIN code function;
11. Provide PCBA or waterproof enclosure,can be used outside.
The Dual Simcard Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
Remote starting pump
Timing start stop pump
Real-time monitoring of soil moisture
Real-time monitoring of pump operation
According to the soil moisture condition, linkage pump irrigation
1.Dual SIM card(Failover mode)
2.Supports OpenVPN which rescue data security
3.Supports Mainstream cloud platform protocols(MQTT SSL, AWS IOT�¯�¼?Azure, Ali Cloud and Huawei Cloud)
4.Various I/O ports(4AI,2DI and 2DO )
5.Quick access to cloud platform with RS485 master and support Modbus to convert MQTT
6.Automatically monitor the status of LAN port (disconnect alarm) to realize real-time monitoring of the network.
