TPU ultra-light tire bicycle wheelchair inner tube
super light 35g
anti punch
eco-friendly
TPU inner tube for wheelchair
Ultra Light Inner Tire
wheelchair super light inner tire
bicyble eco-friendly light inner tube
Polyurethane PU TPU plastic foam rolls Heat Transfer Film
Silicone rubber separation film manufacturer
Product parameters form
1. Thickness: 0.08/0.1/0.15/0.2mm
2. Width: 1560CM wide
3. Applicable temperature: -40 - 120
4. Hardness range: 60a-90a
5. Moq: minimum order size: 3000m.
6. The length of each roll can be rewound according to the required length;The regular roll is 600 meters.
Product parameters form
1. Thickness: 0.08/0.1/0.15/0.2mm
2. Width: 1560CM wide
3. Applicable temperature: -40 - 120
4. Hardness range: 60a-90a
5. Moq: minimum order size: 3000m.
6. The length of each roll can be rewound according to the required length;The regular roll is 600 meters.
cheap price TPU reclaimed raw material
Vapor barrier film for OLED
TPU TPH Car paint protection film
1.52X1.5M/roll
Polysiloxane rubber (silicone rubber for short) is the main material for preparing polymer gas separation film.
At present, the industrial silicon rubber film is composite film or copolymer film, mainly used for oxygen enrichment in the air and separation of harmful gases in chemical industry and petroleum refining and hydrogen recovery
Polysiloxane rubber (silicone rubber for short) is the main material for preparing polymer gas separation film.
At present, the industrial silicon rubber film is composite film or copolymer film, mainly used for oxygen enrichment in the air and separation of harmful gases in chemical industry and petroleum refining and hydrogen recovery.
Heat-insulating artificial leather
Product features
The TPU gas filled tube adopts the new imported polyether particles to be formed in one time, which is non-toxic, odorless and environmentally friendly.
TPU tent tubes are waterproof, mildew-proof, moisture-proof, wind-proof, dust-proof, sunproof, aging resistant, hydrolysis resistant, high bottom temperature resistant, good elasticity, good toughness, air tightness, without adhesion, no joints, uv resistance, pressure resistance, wear resistance, good compression performance, acid resistance, alkali resistance, oil resistance and other advantages, is the only alternative to PVC materials.
Usually 200 meters a roll, the outer layer is wrapped with bubble film, the finished products are packed in cartons or trays.
Product application description (picture and text introduction)
Tpu hose, Tpu tent pipe and Tpu air tube can be applied in the following range after processing:
1. Water sports supplies: such as water walking ball, roller, drift boat, paddling boat, inflatable boat, water bed float, children's boat, swimming circle, swimming suit, water polo beach ball, baby circle, arm circle sleeve, etc.
2. Beach supplies: such as tpu tent, bouncy castle bounce bed, inflatable house, beach mat, inflatable beach chair, inflatable recliner sofa, mattress, battering column tumbledown, beach pillow, ice bucket, coasters, beach ball, rugby, frisbee, etc.
3. Inflatable household items: such as inflatable flocking mattress, baby diaper bed, inflatable sofa, swimming pool, inflatable pillow, warm water bag, tpu wardrobe, inflatable stool, tpu shower curtain, apron, etc.
4. Advertising promotional gifts: such as advertising simulation air model, advertising balloon earth, advertising launch ball, advertising cans, beer bottles, inflatable car model, inflatable bowling, walking ball, advertising simulation aircraft, etc.
5. Christmas inflatable items: Santa Claus, Christmas tree, snowman, etc.
6. Recreational snow supplies: such as ski circles, ski boats, skis, etc.
7. Large animal zodiac inflatable products: inflatable ox, sheep, pig, dog, horse, tiger, rabbit, chicken, bear, dragon, fish, shrimp, etc.
8. Sports and leisure gifts: inflatable bed, inflatable sofa, tourism sanbao inflatable pillow, tpu shopping bag, inflatable backpack, schoolbag, inflatable photo frame, mobile phone seat, mobile phone wipe, warm handbag, hot water bag, etc.
9. Automobile travel supplies: three treasures for travel, inflatable pillow, u-shaped, inflatable waist cushion, cushion for cushion, etc.
Product parameters form
1. Thickness: 0.08/0.1/0.15/0.2mm
2. Width: 1560CM wide
3. Applicable temperature: -40 - 120
4. Hardness range: 60a-90a
5. Moq: minimum order size: 3000m.
6. The length of each roll can be rewound according to the required length;The regular roll is 600 meters.
RO film reverse osmosis membrance for water treatment
Easy installation and even gas distribution.
The super elasticity of the TPU material makes the aeration aperture variable with the size of the air supply
With the excellent strength of TPU material, the thickness of pipe wall can be made to 25% of that of rubber and PVC aerator, which can greatly reduce the aeration resistance loss and achieve the purpose of energy saving;
Long-term operation, low operation cost;
TPU material, better performance than other types of aerators, stable operation, longer service life;
Excellent high pressure resistance, oil resistance, weather resistance, corrosion resistance, and quorao resistance, light weight, soft and convenient to use, special ultra-micro hole way to increase the oxygen utilization rate to more than 30%.
Due to the characteristics of bending resistance, the package volume is small and the transportation is more convenient.
Product parameters form
1. Specification range: diameter: 20mm-300mm, single-layer wall thickness: 0.1mm-1mm
2. Applicable temperature: -40 - 120
3. Hardness range: 60a-90a
4. Minimum order quantity: general specifications are not limited, and the minimum order size is 3000m.
5. Delivery date: general specifications can be delivered within 3 days; customized specifications can be delivered within 7 days according to the quantity.
6. Each roll can be winded according to the required length;The norm is 100 meters per roll.
1. Easy installation and even gas distribution.
2. The super elasticity of the TPU material makes the aeration aperture variable with the size of the air supply;
3. With the excellent strength of TPU material, the thickness of pipe wall can be made to 25% of that of rubber and PVC aerator, which can greatly reduce the aeration resistance loss and achieve the purpose of energy saving;
4. Long-term operation, low operation cost;
5. TPU material, better performance than other types of aerators, stable operation, longer service life;
6. Excellent high pressure resistance, oil resistance, weather resistance, corrosion resistance, and quorao resistance, light weight, soft and convenient to use, special ultra-micro hole way to increase the oxygen utilization rate to more than 30%.
7. Due to the characteristics of bending resistance, the package volume is small and the transportation is more convenient.
Easy installation and even gas distribution.
The super elasticity of the TPU material makes the aeration aperture variable with the size of the air supply;
With the excellent strength of TPU material, the thickness of pipe wall can be made to 25% of that of rubber and PVC aerator, which can greatly reduce the aeration resistance loss and achieve the purpose of energy saving;
Long-term operation, low operation cost;
TPU material, better performance than other types of aerators, stable operation, longer service life;
Excellent high pressure resistance, oil resistance, weather resistance, corrosion resistance, and quorao resistance, light weight, soft and convenient to use, special ultra-micro hole way to increase the oxygen utilization rate to more than 30%.
Due to the characteristics of bending resistance, the package volume is small and the transportation is more convenient.
PDMS organosilicon film is a kind of high polymer film, which is prepared from polydimethylsiloxane by special process.
Due to the properties of polydimethylsiloxane, the PDMS film has some special properties.
Elasticity, low Young's modulus, excellent gas permeability, chemical stability, thermal stability, low temperature flexibility (-60~200â?? to maintain excellent performance), full transparency, biocompatibility.
The permeability of thin films can be used for gas separation, such as the separation of small molecules such as gas.
