RFID Card, people also calls them MIFARE card, contactless card, proximity card, NFC PVC card, chip card, IC card, UHF card, etc. With the chip of low frequency 125KHz, high frequency 13.56MHz, or ultrahigh frequency 860~960MHz. Since 1980, RFID card was widely used in transportation system, security protection, mobile payment, access control, member managementm, Library card, ID card, UID card, ��
Features
1. Material: PVC, PET, PET-G
2. Size: CR80 (85.5*54*0.84mm) or Customized
3. Printing: Full color CMYK Offset Printing, silk screen printing, Pantone color, etc
4. Frequency: LF 125 Khz, HF 13.56mhz, UHF 860~960Mhz
5. Operating Mode: Contactless
6. Reading distance: 1mm-1m, depend on the chip and reader
7. Data retention: 10 years
8. Operating life: Can be read and encode more than 100,000 times
9. Crafts Card surface: Glossy/Matted/Frosted
Magnetic stripe: Loco (300 OE), Hico (2750 OE, 4000 OE)
Serial Number, Laser number, Laser stamp, Embossing, Invisible UV,
Barcode, QR codes, Signature panel, Scratch off panel, Silk full side of gold/silver,
Chip Encoding, Mag stripe Encoding, Hot Stamping, Hole punching, translucent,
Separate polybag packing, etc
Chip: SLE5542, SLE5528, FM4442, FM4428, ATMEL AT24C01A, ATMEL AT24C02, ATMEL , ATMEL AT24C64.
1. Material: PVC, PET, PET-G
2. Size: CR80 (85.5*54*0.84mm)
3. Printing: Full color CMYK Offset Printing, silk screen printing, Pantone color, etc
4. Operating Mode: Contact
5. Crafts Card surface: Glossy/Matted/Frosted
Magnetic stripe: Loco (300 OE), Hico (2750 OE, 4000 OE)
Serial Number, Laser number, Laser stamp, Embossing, Invisible UV,
Barcode, QR codes, Signature panel, Scratch off panel, Silk full side of gold/silver,
Chip Encoding, Mag stripe Encoding, Hot Stamping, Hole punching, translucent,
Separate polybag packing, etc
1. Materia: Silicone
2. Dimension : Diameter 45mm/50mm/60mm/65mm/74mm
3. Chip Available
LF(125 Khz) TK4100, EM4200, T5577, Hitag2
HF(13.56 Mhz) MIFARE Classic�® 1K/4K, MIFARE Ultralight�® EV1, Ntag203/213/215/216, etc
UHF(860~960MHz) Alien H3, Monza 4/5, etc
4. Protocol: ISO14443A, ISO15693, ISO 11784/5, EPC Gen2, ISO/IEC18000-6C
5. Reading distance: 1cm - 1m
6. Working environment: -30�°C~75�°C
7. Crafts logo print, Embossing logo, Laser logo, Barcode, QR Code
8. Color Blue, Red, Black, White, Yellow, Grey, Green, Pink, or customized
9. Protection Waterproof, anti-shaking, high temperature endurable, Soft, Flexible
1. Materia: Silicone
2. Dimension : Diameter 45mm/50mm/60mm/65mm/74mm
3. Chip Available
LF(125 Khz) TK4100, EM4200, T5577, Hitag2
HF(13.56 Mhz) MIFARE Classi 1K/4K, MIFARE UltralightEV1, Ntag203/213/215/216, etc
UHF(860~960MHz) Alien H3, Monza 4/5, etc
4. Protocol: ISO14443A, ISO15693, ISO 11784/5, EPC Gen2, ISO/IEC18000-6C
5. Reading distance: 1cm - 1m
6. Working environment: -30C~75C
7. Crafts logo print, Embossing logo, Laser logo, Barcode, QR Code
8. Color Blue, Red, Black, White, Yellow, Grey, Green, Pink, or customized
9. Protection Waterproof, anti-shaking, high temperature endurable, Soft, Flexible
Have you thought of using astandard card printer to print, erase and re-write to the same card WITHOUT using a ribbon?
Kaisere's TRW Cards(thermal re-write)have a heat-sensitive layer which allows text andimages to be printed and erased a minimum of 500 times using a standardRe-Write card printer. No ribbon cost. Just use the printer in the same way butwithout a ribbon. The heat basically triggers a dye within the card that willappear as a solid color. When you have finished with the card, run the cardback through the printer and it will wipe the surface ready for re-printing.
Choices of either a Blue or BlackRe-Writable surface, you can only print a single color. Under the clearRe-writable layer, we can make pre-printing in full colors.
Thermal Rewrite Card 2.jpg
Thermal Rewrite Card 3.jpg
1. Material: ABS
2. Color: Blue, Red, Black, White, Yellow, Grey, Green, or customized
3. Chip Available
LF(125 Khz) TK4100, EM4200, T5577, Hitag2, etc
HF(13.56 Mhz) MIFARE Classic�® 1K/4K, MIFARE Ultralight�® EV1, Ntag203/213/215/216, etc
4. Protocol: ISO 11784/5, ISO14443A, ISO15693
5. Reading distance: 1-10cm
6. Working environment: -25�°C~50�°C
7. Crafts logo print, number
1. Material: Coated paper, PET or PVC
2. Type: dry inlay or wet inlay
3. Chip: Alien/Higgs3
4. Frequency: 860~960Mhz
5. Standard: ISO/IEC 18000-6C, EPC Class1 Gen2
6. Reading Distance: 1-10m, relates with the antenna, reader and working environment
7. Operating Mode: Contactless and passive
8. OperationTemperatur: -20 to 60
9. StorageTemperature: -20 to 50
