Product overview
Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection.
Technical parameters
Category Performance, parameters
Host Principle Ultrasonic time difference principle
Accuracy ±1%
Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French.
Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms)
Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC.
Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined.
Pipe inner diameter 15~6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter)
Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves.
Temperature -30C~160C
Turbidity 10000ppm and small bubble content
Flow rate 0~±10m/s
Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C
Humidity Host:85%RH Sensor protection level IP67
Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time.
Different measurement can be achieved by using the AC90~260V power adapter.
Power consumption 1W
Shell material Flame retardant ABS
Host weight 390g
Product overview
Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection.
Technical parameters
Category Performance, parameters
Host Principle Ultrasonic time difference principle
Accuracy ±1%
Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French.
Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms)
Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC.
Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined.
Pipe inner diameter 15~6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter)
Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves.
Temperature -30�ºC~160�ºC
Turbidity 10000ppm and small bubble content
Flow rate 0~�±10m/s
Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C
Humidity Host:85%RH Sensor protection level IP67
Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time.
Different measurement can be achieved by using the AC90~260V power adapter.
Power consumption 1W
Shell material Flame retardant ABS
Host weight 390g
Portable ultrasonic flow meter enables non-contact measurement of liquid flow. By installing the sensor on the outer wall of the pipe, the flow measurement can be completed, which is convenient and accurate. Built-in printer and SD card memory for immediate or timed printing of set measurements. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries, can be used for production testing, flow comparison, temporary monitoring, is a necessary tool for flow detection.
External clip type ultrasonic flowmeter is composed of a main body and an external clip type sensor. Simply attach the clip-on sensor to the surface of the pipe to complete the flow measurement of various liquids. Compared with the traditional flow meter, it does not need to cut off the tube, and the installation is quick and convenient, realizing the non-destructive installation.
The main unit can be installed in the wall, instrument box and distribution box, and the protection level can reach IP67. The external clip type sensor is installed on the surface of the pipe, and different sensors are selected. The applicable diameter is DN15~DN6000.
Plug-in ultrasonic flowmeter is composed of a main body and an external clip type sensor. Simply attach the clip-on sensor to the surface of the pipe to complete the flow measurement of various liquids. Compared with the traditional flow meter, it does not need to cut off the tube, and the installation is quick and convenient, realizing the non-destructive installation.
Both the main unit and the sensor are mounted on the pipeline with protection class IP68. The external clip type sensor is installed on the surface of the pipe, and different sensors are selected. The applicable diameter is DN50~DN6000.
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss.The applicable diameter is DN15~DN6000.
