Maxdrill shank adaptors ensure a quality drill string interface to the most exacting industry tolerances.
Built to seamlessly interface with hydraulic and pneumatic drifters and top hammers,our shank adapters come in a full range of industry-standard thread configurations. Our precision grinding process ensures straightness,and our tools are fully carburized with an advanced heat treatment. Different shank adapters are available, like Atlas Copco, Tamrock, Ingersoll Rand,etc.
Maxdrill shank adaptors ensure a quality drill string interface to the most exacting industry tolerances.
Built to seamlessly interface with hydraulic and pneumatic drifters and top hammers,our shank adapters come in a full range of industry-standard thread configurations. Our precision grinding process ensures straightness,and our tools are fully carburized with an advanced heat treatment. Different shank adapters are available, like Atlas Copco, Tamrock, Ingersoll Rand,etc.
Maxdrill shank adaptors are available for
ATLAS COPCO (COP1238, COP1838, COP1032 and etc)
FURUKAWA(HD715,HD612, HD609 ,PD200 and etc )
INGERSOLL-RAND (VL140, VL671, YH80A and etc)
TAMROCK(HLX5, HL600, HL500,HL300, HL 700, HL850, HL1000 ,HL1500 and etc )
And others
(1)Size: R28,R32,R38,T38,T45,T51,T60
(2)Package: in cartons or in bundles.
(3)Productivity: 2000pcs/month
1.Type:COP1032
2.Thread:T38
3.Length:550mm
4.Diameter:45mm
5.Weight:4.5Kgs
Product Despcription
During the construction of undergroud works, it is very common to encounter soft rock, fractured zone and large deformation due to high ground stress. In the case of serious collapsing, extra-long anchor is needed instead of ordinary one.
Maxdrill self-drilling anchor embodies drilling, grouting and anchoring as a� whole.
Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It's irreplaceable in narrow construction environment.
48mm 8 buttons thread bit;
Thread: R32
Skirt: Retrac or Standard
Face: Flat face or Drop center
Tips: Spherical; Ballistic; Semi-ballistic
Part NO.3076T4513D
Bit Diameter: 76mm
Website:www.maxdrillrocktools.com
Button bit design: Drop centre
Tungsten carbide (Buttons): Spherical, Ballistic and Conical.
Applications: Bench, Production
We have different designs for various rock formations, longer service life to decrease use costs for users.
Used for hard or very hard rock formation. Excellent quality and durability and Specialized heat treat & stress reliefï¼?also Maximum performance and hole cleaning ability
(1) Type: button bits
(2) Size: Size: H22
(3) Diameter: 34mm
(4) Taper: degree :
(5).Button bit: 7 Buttons
(5) Package: in pallet or in carton.
(6) Productivity: 50000pcs/ month
Size:76mm-605mm
Hammer: 2-12
Package: in wooden case
Productivity: 2000pcs/month
1.Suitable for high pressure drilling rigs
2.Water well drilling
3.Record breaking penetration
4.Exploring Civil Engineering Applications
5.Lowest cost per foot drilled
6.Simple & robust design
7.Exploring Civil Engineering Applications
8.Foot Valve not required in the bit
9.Longer parts life
10.Maximizes efficiency
11.Develops greater power for any compressor capacities
(1)Threaded connecting sleeves such as R22, R25, R28, R32, R38, T38, T45, T51, etc. At the same time, we can also produce reducing connecting sleeves such as R38-R32, T38-R38, T45-T38, T51-45, etc.
(2) Specifications: R25, R28, R32, R38, T38, T45, T51
(3) Length: 140mm-235mm,
(4) Packaging: wooden box or carton packaging.
(5) Production capacity: 5000 pcs/month
Bit Diameter: 48mm-57mm
Button bit design: Flat face, drop centre, Normal and Retrac body.
Tungsten carbide (Buttons): Spherical, Ballistic and Conical.
Applications: Drifting, Tunneling, Bench
(1)Steel grade: 20CrNi3Mo equivalent to SANDBAR 64
(2) Thread: T38
(3)Length: 3050mm
(4)Package: in pallet or in bundles.
(5)Productivity: 20000MT / month
ecause of economy and powerful drilling capacity, down the hole hammer become an advanced drilling tool for drilling and mining industries. Down the hole hammers and drill bits are designed together to work in perfect unison, giving high penetration rates, long service life and low costs.
1. Deliver maximum energy to drilling bit, fast drilling speed and low air consumption due to the special inner structure of HD series DTH hammer designed according to newest rock drilling theory.
2. Smooth performance and long service life of HD series DTH hammer due to high quality alloy steel materials and advanced processing technology adapted.
3. Low problem rate and easy to maintenance due to simple , reliable and easy assemble and disassemble inner structure of hammer.
4. Easy to depart bit from hammer due to multihead thread connecting chuck and cylinder of hammer.
5. Interchangeable with DTH bit and drill pipe
Low pressure and high pressure hammers are available in our company.
1.Thread:T38
2.Button bits: 12 Buttons
3.Bit Diameter: 64mm
4.Button bit design: Flat face,Retrac body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
6.Applications: Bench, production
Maxdrill shank adaptors ensure a quality drill string interface to the most exacting industry tolerances.Built to seamlessly interface with hydraulic and pneumatic drifters and top hammers,our shank adapters come in a full range of industry-standard thread configurations.
1.3 inch Convex face down-the-hole bit
2.No.*Button(mm):Outer:6*12; Inner:2*10; Front:2*10
3.Weight:3.0Kgs
1.Atlas Copco (COP1238, COP1838, COP1032 and etc)
2.Furukawa (HD715, HD612, HD609, PD200 and etc)
3.Ingersoll-Rand (VL140, VL671, YH80A and etc)
4.Tamrock(HLX5, HL600, HL500, HL300, HL 700, HL850, HL1000, HL1500 and etc)
5.Size: R28, R32, R38, T38, T45, T51, T60
6.Thread: R32, R38, T38, T45, T51
7.Diameter: 37.8, 38, 44.3, 44.8, 44.9, 45, 51.7, 51.9, 54, 55.5, 57, 57.8, 60, 65, 68, 69, 74.9, 79mm
9.Length: 245-880mm
1.Bit Diameter: 43mm-76mm
2.Length of drill rod: 1800mm-5530mm
3.Button bit design: Flat face, drop center, normal and retrac body.
4.Applications: Drifting, tunneling, bench
1.DTH Hammer: 3-12
2.Bit Size: 76mm-605mm
ADVANTAGE:
1.Deliver maximum energy to drilling bit, fast drilling speed and low air consumption due to the special inner structure of DTH hammer designed according to newest rock drilling theory. 2.Smooth performance and long service life of DTH hammer due to high quality alloy steel materials and advanced processing technology adapted. 3.Low problem rate and easy to maintenance due to simple, reliable and easy assemble and disassemble inner structure of hammer. 4.Easy to depart bit from hammer due to multihead thread connecting chuck and cylinder of hammer. 5.Interchangeable with DTH bit and drill pipe. Low pressure and high pressure hammers are available .
SR35-43mm,button bit
Advantage: (Compared with the ordinary thread button bit)
1. Thread with taper . 2. Can effectively solve the fracture of the root of the phenomenon. 3.Apply for national patent products
1.Bit Diameter: 102mm
2.Button bit design: Flat face, drop centre, Normal and Retrac body.
3.Tungsten carbide (Buttons): Spherical, Ballistic and Conical.
4.Applications: Bench, Production
5.Buttons:14 Buttons
1.Part NO.30342208-11
2.Bit Diameter: 34mm-43mm
3.Length of drill rod: 610mm-3660mm
4.Button bit design: Flat face/standard skirt
5.Tungsten carbide (Buttons): Spherical, Ballistic and Conical.
6.Applications: small hole drilling
7.We have different designs for various rock formations, longer service life to decrease use costs for users.
1.Part NO.30362208-11
2.Bit Diameter: 34mm-43mm
3.Length of drill rod: 610mm-3660mm
4.Button bit design: Flat face/standard skirt
5.Tungsten carbide (Buttons): Spherical, Ballistic and Conical.
6.Applications: small hole drilling
1.Part No.3064T3810D
2.Bit Diameter: 64mm
3.Thread:T38
4.Button Bits:10 buttons
5.Button bit design: drop center, normal body.
6.Tungsten carbide (Buttons): Spherical, ballistic and conical.
7.Applications: Bench, production.
We have different designs for various rock formations, and a longer service life to decrease use costs for users.
1.Part No.3048R3209
2.Bit Diameter: 48mm
3.Button bits:9 buttons
4.Button bit design: Flat face, normal body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
6.Applications: Drifting, tunneling, bench
1.Bit Diameter: 34mm
2.Size: Hex. 22mm
3.Button Bits: 7Buttons
4.Taper degree: 11
5.Applications: Quarrying, small hole drilling
6.Our tapered bits include button, cross and chisel designs.
7.Longer service life and lower drilling costs.
8.1, 12 tapered button bit with hot zinc-coating
1.Part NO.3057R3209
2.Bit Diameter: 57mm
3.Thread:R32
4.Buttons: 9
5.Button bit design: Flat face/ Normal body.
6.Tungsten carbide (Buttons): Spherical, Ballistic and Conical.
7.Applications: Drifting and Tunneling
1.Part NO.3070T3813D
2.Bit Diameter: 70mm
3.Button bits:13 Buttons
4.Button bit design: drop center, normal body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
6.Applications: Bench, production
1.Part NO.MM4A
2.DTH Hammer: 3"-12"
3.Bit Size: 76mm-605mm
4.Down the hole hammers and drill bits are designed together to work in perfect unison,
1.Type:Connvex
2.Diameter:70mm(2 3/4inch)
3.Part No.70MBR2CV
4.Outer:6*�?12
5.Inner2*�?10
6.Front2*�?10
7.Flushing holes:2
8.Weight:2.0Kgs
1.Diameter:90mm
2.Gauge:9x11
3.Front:7x11
4.Flushing holes:3x8
5.Weight(kg):5.8
6.Part-No:MROD76-90
1.Top Sub:MD45A01
2."O" Ring of Top Sub:MD45A02
3.Check Valve:MD45A03
4.Spring:MD45A04
5.Air Distributor:MD45A05
6.Internal Cylinder:MD45A06
7.Piston:MD45A07
8.External Cylinder:MD45A08
9.Guided Sleeve:MD45A09
10."O" Ring of Stop Ring:MD45A10
11.Stop Ring:MD45A11
12.Drive Chuck:MD45A12
13.Drill Bit:MD45A13.
Technical Date
1.Length(Less Bit):1011mm
2.Weight(Less Bit):43.20kg
3.External diameter:�¸99mm
4.Bit shank:COP44/DHD340A
5.Hole Range:�¸110-�¸135
6.Connection Thread:API 2 3/8" Reg
Size:76mm-605mm
Hammer: 2â??-12â??
Package: in wooden case
Productivity: 2000pcs/month
Website:www.maxdrillrocktools.com
1.Suitable for high pressure drilling rigs
2.Water well drilling
3.Record breaking penetration
4.Exploring Civil Engineering Applications
5.Lowest cost per foot drilled
6.Simple & robust design
7.Exploring Civil Engineering Applications
8.Foot Valve not required in the bit
9.Longer parts life
10.Maximizes efficiency
11.Develops greater power for any compressor capacities
1.Workmanship:Hot press inserting,Same as Atlas,Sandvik
2.Material:Ovako,Timken
3.Diameter:43mm
Certification:ISO9001,SGS
Part No.3089T3813
Bit Diameter: 89mm
Thread:T38
Button Bits: 13 Buttons
Length of drill rod: 900mm-5490mm (MM and MF)
Website:www.maxdrillrocktools.com
Button bit design: Flat face, drop center, normal and retrac body.
Tungsten carbide (Buttons): Spherical, ballistic and conical.
Applications: Bench, production
We have different designs for various rock formations, and a longer service life to decrease use costs for users.
Part No.30342207-11
Bit Diameter: 34mm
Size: Hex. 22mm
Taper degree: 11�°
Applications: Quarrying, small hole drilling
Our tapered bits include button, cross and chisel designs.
Longer service life and lower drilling costs.
11�°, 12�° tapered button bit with hot zinc-coating
Part No.3076T4512
Bit Diameter: 76mm
Button Bits: 12 Buttons
Button bit design: Flat face, drop center, normal and retrac body.
Tungsten carbide (Buttons): Spherical, ballistic and conical.
Applications: Bench, production
Website:www.maxdrillrocktools.com
We have different designs for various rock formations, and a longer service life to decrease use costs for users.
Diameter: 43mm
Thread: R32
Button Bits: 8 Buttons
Flushing hole:Front:2*5 /Gauge:2*8
Buttons: Front:2*8/ Gauge:6*9
Bit Diameter: 34mm
Size: Hex. 22mm
Button bits: 7 Buttons
Website:www.maxdrillrocktools.com
Taper degree: 6�°
Applications: Quarrying, small hole drilling
Our tapered bits include button, cross and chisel designs.
Longer service life and lower drilling costs.
11�°, 12�° tapered button bit with hot zinc-coating
Size: 2 1/2'', 2 3/4'', 3'', 3 1/2'', 4'', 4 1/2'', 5'', 5 1/2'', 6'', 8'', 10'', 10 3/4'';
Length: 1m-6m;
Thread size: 2 3/8"API Reg, 2 7/8" API Reg, 3 1/2" API Reg, 4 1/2" API Reg, 2 3/8" API IF, 3 1/2" API IF; BECO 6'', BECO 8'';
Wall thickness: 4mm-16mm;
1.DTH Hammer: 3-12
2.Bit Size: 76mm-605mm
4.Down the hole hammers and drill bits are designed together to work in perfect unison,
ADVANTAGE:
1.Deliver maximum energy to drilling bit, fast drilling speed and low air consumption due to the special inner structure of DTH hammer designed according to newest rock drilling theory.
2.Smooth performance and long service life of DTH hammer due to high quality alloy steel materials and advanced processing technology adapted.
3.Low problem rate and easy to maintenance due to simple, reliable and easy assemble and disassemble inner structure of hammer.
4.Easy to depart bit from hammer due to multihead thread connecting chuck and cylinder of hammer.
5.Interchangeable with DTH bit and drill pipe. Low pressure and high pressure hammers are available in our company.
Maxdrill shank adaptors ensure a quality drill string interface to the most exacting industry tolerances. Built to seamlessly interface with hydraulic and pneumatic drifters and top hammers, our shank adapters come in a full range of industry-standard thread configurations. Our precision grinding process ensures straightness, and our tools are fully carburized with an advanced heat treatment.
Different shank adapters are available, like Atlas Copco, Tamrock, Ingersoll Rand,etc. Also for the same drill machine, due to different applications, the shank adapters can be different length and different threads
Atlas Copco (COP1238, COP1838, COP1032 and etc)
Furukawa (HD715, HD612, HD609, PD200 and etc)
Ingersoll-Rand (VL140, VL671, YH80A and etc)
Tamrock(HLX5, HL600, HL500, HL300, HL 700, HL850, HL1000, HL1500 and etc)
Size: R28, R32, R38, T38, T45, T51, T60
Suitable for rock drills made by BoartLongyear, Atlas Copco, Bohler, Furukawa, Gardner Denver, Holman, Ingersoll Rand, Joy, Le Roi, Montabert, Mitsui, Seco/Secan, Secoma, Tamrock, Tokyo Riuki, Toyo
Thread: R32, R38, T38, T45, T51
Diameter: 37.8, 38, 44.3, 44.8, 44.9, 45, 51.7, 51.9, 54, 55.5, 57, 57.8, 60, 65, 68, 69, 74.9, 79mm
Length: 245-880mm
Package: in wooden case or in bundles.
Productivity: 2000pcs/month
1.Part No.3076T3812
2.Bit Diameter: 76mm
3.Button bits: 12 buttons
4.Length of drill rod: 900mm-5490mm (MM and MF)
5.Button bit design: Flat face, drop center, normal and retrac body.
6.Tungsten carbide (Buttons): Spherical, ballistic and conical.
7.Applications: Bench, production.
We have different designs for various rock formations, and a longer service life to decrease use costs for users.
1.Suitable for high pressure drilling rigs
2.Water well drilling
3.Record breaking penetration
4.Exploring Civil Engineering Applications
5.Lowest cost per foot drilled
6.Simple & robust design
7.Exploring Civil Engineering Applications
8.Foot Valve not required in the bit
9.Longer parts life
10.Maximizes efficiency
11.Develops greater power for any compressor capacities
Product descripion of medium air pressure dth drill bit:
Size:90mm
Hammer: 3.5 inch
Package: in wooden case
Productivity: 2000pcs/month
1.Suitable for high pressure drilling rigs
2.Water well drilling
3.Record breaking penetration
4.Exploring Civil Engineering Applications
5.Lowest cost per foot drilled
6.Simple & robust design
7.Exploring Civil Engineering Applications
8.Foot Valve not required in the bit
9.Longer parts life
10.Maximizes efficiency
11.Develops greater power for any compressor capacities
Product descripion of dth drill tools twist down workbench:
Size:90mnm
Hammer: 3.5 inch
Package: in wooden case
Productivity: 2000pcs/month
1.Suitable for high pressure drilling rigs
2.Water well drilling
3.Record breaking penetration
4.Exploring Civil Engineering Applications
5.Lowest cost per foot drilled
6.Simple & robust design
7.Exploring Civil Engineering Applications
8.Foot Valve not required in the bit
9.Longer parts life
10.Maximizes efficiency
11.Develops greater power for any compressor capacities
1.Part No.3089ST5814D
2.Bit Diameter: 89mm
3.Button Bits:14 buttons
4.Button bit design: Drop center, Normal body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
6.Applications: Bench, production.
We have different designs for various rock formations, and a longer service life to decrease use costs for users.
1.Diameter: 127mm
2.Thread: T51
3.Color: Red
4.Button Bits: 19 buttons
Thread button bits made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands, and transmit intensive impact energy into the rock with the least possible loss of energy.According to different drilling application, we have different design to meet customers with good quality and good price .
1.Part No.30127T5118DR
2.Bit Diameter: 127mm
3.Button Bits: 18 buttons
4.Length of drill rod: 1525mm-6100mm (MM and MF)
5.Button bit design: Drop centre, Retrac body.
6.Tungsten carbide (Buttons): Spherical, Ballistic and Conical.
7.Applications: Bench, Production.
8.We have different designs for various rock formations, longer service life to decrease use costs for users.
1.Diameter: 105mm(4 1/8 inch)
2.Part No.105MM40FF
3.No.Buttons: Outer:7*14 Front:6*13
4. Flushing holes: 2
5. Weight: 7.7kg
Applications:
1.Suitable for high pressure drilling rigs
2.Water well drilling
3.Record breaking penetration
4.Exploring Civil Engineering Applications
5.Lowest cost per foot drilled
6.Simple & robust design
7.Exploring Civil Engineering Applications
8.Foot Valve not required in the bit
9.Longer parts life
10.Maximizes efficiency
11.Develops greater power for any compressor capacities
Down the hole drill pipe
DTH drill pipe
Drill pipe is hollow, thick-walled, steel piping that is used on drilling rigs to facilitate the drilling of a wellbore and comes
in a variety of sizes, strengths, and weights but are typically 30 to 33 feet in length. They are hollow to allow drilling fluid
to be pumped through them, down the hole, and back up the annulus. It is designed to support its own weight for combined lengths that often exceed 1 mile down into the Earth's crust. Used drill stem is often sent to a yard for inspection, sorted, and stored until new drill sites can be explored.
1.Size: 2 1/2'', 2 3/4'', 3'', 3 1/2'', 4'', 4 1/2'', 5'', 5 1/2'', 6'', 8'', 10'', 10 3/4'';
2. Length: 1m-6m;
3.Thread Type: 2 3/8"API Reg, 2 7/8" API Reg, 3 1/2" API Reg, 4 1/2" API Reg, 2 3/8" API IF, 3 1/2" API IF; BECO 6'', BECO 8'';
4. Wall thickness: 4mm-16mm
Y20 Pneumatic Rock Hammer Drill
Introduction:
* Model Y20 Hand-held Rock Drill is intended for drilling downward and inclined blast holes in medium hard and herd rock (f=8~18)
* The rock drill is mainly used small quarries. Mines for constructing in mountain areas, water conservancy works in capital construction, also for secondary blasting in large mines and other projects, Model FY200B Line Oiler isincorporated into for lubricating during operation.
Y24 Rock Drilling Machine
Introduction:
Most suitable for drilling downward and inclined blast-holes in medium nard and hard rock with a hardness of f=8~18:
An ideal tool for rock drilling operations in small open-pit quarries, mines, water conservancy projects and road building in
hilly areas, etc, and for secondary blasting in large mines.The incorporation of FY200B Line Oiler with transparent casing provides automatic lubrication during operation during operation.
Features:
Grouped control mechanism, quick to start up with"air-on, water-on, air-off"mechanism, easy operation and maintenance.
In addition to having the excellent performance of YT24, it has stronger flushing power.
Competitive price new product self-drilling rock anchor bolt system anchor bolt price
Product descripion of self-drilling hollow core bar anchors:
(1)Type: R25N, R32N, R32S, R38N, R51L, R51N, T30/11, T40/16, T76N, T76S.
(2)Max. Tensile Load: 200-1900KN.
(3)Yield Load: 150-1500KN.
(4)Standard length: we can supply any length according to construction require.
(5)Application: Drilling ,Placement of steel reinforcing elements ,Grout placement
Pneumatic YT28 air leg rock drill machine
APPlICATIONS:
Most fit drilling horizontal and inclined blast holes in medium-hard rock with a hardness of f=8~18.
It may also be for making roof bolting holes. The drill is an important instrument in mining, railway, communication and water conservancy projects. May be used together with FT160BC or FT160BD Air-leg and FY200B Line Oiler with transparent casing. The tool can also be mounted on a rig or a wagon.
FEATURES:
Grouped control mechanism, quick to start up with'air-on, water-on, air-off' mechanism easy handle and maintain.
Low noise, small vibration, energy-saving and efficient, highly interchangeable parts with long service life reliable performance.Different form similar products particularly in its high efficiency, strong flushing and powerful torque.
New product Quality self-drilling hollow core bar anchors
Product descripion of self-drilling hollow core bar anchors:
(1)Type: R25N, R32N, R32S, R38N, R51L, R51N, T30/11, T40/16, T76N, T76S.
(2)Max. Tensile Load: 200-1900KN.
(3)Yield Load: 150-1500KN.
(4)Standard length: we can supply any length according to construction require.
(5)Application: Drilling ,Placement of steel reinforcing elements ,Grout placement
Maxdrill ST58 Ballistic Bit
1.Part No. 3089ST5814D
2.Bit Diameter:89mm
3.Thread: ST58
4.Button Bits: 14 Buttons
5.Length of drill rod: 1800mm-5530mm
6.Button bit design: Flat face, drop center, normal and retrac body.
7.Tungsten carbide (Buttons): Spherical, ballistic and conical.
8.Applications: Drifting, tunneling, bench
Technical Parameters
1. Length (Less bit):1030mm
2. Weight (Less bit):39.00kg
3. External Diameter:99mm
4. Bit Shank:Cop44/DHD340A
5. Hole Range:�?110-�?135
6. Connection Thread:API 2 3/8â?³ Reg
7. Working Pressure:1.0-2.5Mpa
8. Impact Rate at 1.5Mpa:28HZ
9. Recommanded Rotation Speed:25-40r/min
10. Air Consumption: 145-350PSI / 200-600CFM
R32 Threaded Drill Bit Specificaytions:
1.Diameter: 45mm (1 3/4inch)
2.Skirt body type: retrac, and normal
3.Face: flat, drop center
4.7 buttons
1.Threaded: R32
2.Bit diameter: 48mm
3.7 buttons
4.Angle: 30degree
5.Class:H
Maxdrill threaded button bits offers leading strength and penetration rates in the industry for more productivity, excellent straightness and hole clean quality,
1. R32
2. bit diameter: 43mm
3. 8 buttons
4.Class: S
5.Angle:30 degree
R32 Tungsten Carbide Drill Bit for Drifting and Tunneling.
45mm bit diameter; 8 buttons;
Tips: Spherical;ballistic;semi-ballistic
R32 43mm for Sandvik ;
Tips: Ballistic;Semi-ballistic; Spherical
Connect thread:R32
R32 top hammer bits;
1. 9 buttons
2. R32
3. Bit diameter: 48mm
4. Tips: Semi-Ballistic
5. Negotiable Price
R32 top hammer bits;
1. 9 buttons
2. R32
3. Bit diameter: 48mm
4. Tips: Semi-Ballistic
5. Negotiable Price
Diameter: 2 1/8inch(54mm);
Front:3*6mm;
Gauge: 1*5.5;
9 buttons.
R32 1 1/4 Threaded Bit;
Bit Diameter: 45mm
Angle:30degree
Tips: Spherical
1.Part No.3064R3210D
2.Bit Diameter: 64mm
3.Button bits: 10 buttons
4.Button bit design: drop center, normal body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
6.Applications: Drifting, tunneling, bench
7.We have different designs for various rock formations, and a longer service life to decrease use costs for users. Negotiable Price.
Maxdrill R32 Drill Bit Flat Front Button Bit Dia 64mm;
1.Part No.3064R32F09
2.Bit Diameter: 64mm
3.Button bits: 9 buttons
4.Button bit design: Flat face, drop center, normal and retrac body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
1.Part No.3076R32F14
2.Diameter:76mm
3.Thread:R32
4.14buttons
5.Applications: Drifting, tunneling, bench
1.Part No.3051R32F09R
2.Bit Diameter: 51mm
3.Button bits: 9 buttons
4.Button bit design: Drop center, Retrac body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
6.Applications: Drifting, tunneling, bench
7.We have different designs for various rock formations, and a longer service life to decrease use costs for users.
1.Part No.3054R32F09R
2.Bit Diameter: 54mm
3.Button bits: 9 buttons
4.Button bit design: Flat face, drop center, normal and retrac body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
6.Applications: Drifting, tunneling, bench
7.We have different designs for various rock formations, and a longer service life to decrease use costs for users.
1.Part No.3057R32F09R
2.Bit Diameter: 57mm
3.Button bits: 9 buttons
4.Button bit design: Flat face, retrac body.
5.Tungsten carbide (Buttons): Spherical, ballistic and conical.
6.We have different designs for various rock formations, and a longer service life to decrease use costs for users.
7.Negotiable Price
High Performance Mining Machine Hand Rock Drill YN27C Suitable for Different Rock Layers
Product Specifications
YN27C Hand-Held rock drills
Most suitable for drilling downward and inclined blast-holes in medium nard and hard rock with a  hardness of f=8-18:
An ideal tool for rock drilling operations in small open-pit quarries, mines, water conservancy projects and road building in hilly areas, etc., and for secondary blasting in large mines
More products
Maxdrill 12 Inch IADC 127/537 Tricone Bit for Water Well Drillin
IADC Thread Dia(mm) weight(kg) Air Pressure Rotary Speed
542 3 1/2"API 171 21 0.2-0.4MPa 110-80RPM
632 3 1/2"API 171 20 0.2-0.4MPa 120-50RPM
642 3 1/2"API 171 20 0.2-0.4MPa 120-50RPM
732 3 1/2"API 171 21 0.2-0.4MPa 90-60RPM
412 4 1/2"API 200 34 0.2-0.4MPa 120-90RPM
545 4 1/2"API 200 34 0.2-0.4MPa 110-80RPM
635 4 1/2"API 200 34 0.2-0.4MPa 100-60RPM
545 4 1/2"API 216 36 0.2-0.4MPa 110-80RPM
412 4 1/2"API 229 50 0.2-0.4MPa 120-90RPM
845 4 1/2"API 229 50 0.2-0.4MPa 80-50RPM
545 6 5/8"API 251 65 0.2-0.4MPa 110-80RPM
642 6 5/8"API 251 65 0.2-0.4MPa 100-60RPM
645 6 5/8"API 251 65 0.2-0.4MPa 100-60RPM
712 6 5/8"API 251 65 0.2-0.4MPa 90-60RPM
715 6 5/8"API 251 65 0.2-0.4MPa 90-60RPM
745 6 5/8"API 251 65 0.2-0.4MPa 90-60RPM
632 6 5/8"API 270 83 0.2-0.4MPa 100-60RPM
742 6 5/8"API 279 74 0.2-0.4MPa 90-60RPM
545 6 5/8"API 310 100 0.2-0.4MPa 110-80RPM
642 6 5/8"API 311 100 0.2-0.4MPa 110-60RPM
645 6 5/8"API 311 100 0.2-0.4MPa 110-60RPM
732 6 5/8"API 310 100 0.2-0.4MPa 90-50RPM
1.Part No.30412207-07
2.Bit Diameter: 41 mm
3.Button Bits: 7 buttons
4.Size: Hex25mm
5.Taper degree : 7�°
Applications: Quarrying, small hole drilling
Our tapered bits include both button, cross and chisel designs.
Longer service life and lower drilling costs.
7�° Taper button bit with hot zinc-coating
Product descripion of self-drilling anchor bar:
(1)Type: R25N, R32N, R32S, R38N, R51L, R51N, T30/11, T40/16, T76N, T76S.
(2)Max. Tensile Load: 200-1900KN.
(3)Yield Load: 150-1500KN.
(4)Standard length: we can supply any length according to construction require.
(5)Application: Drilling ,Placement of steel reinforcing elements ,Grout placement
Size: Hex.25mm, Hex.28mm, Hex. 32mm
Length:Â 400mm-700mm
Shank length:Â 83mm, 108mm, and 152mm
Head:Â chisel, point
Package: in wooden case or in bundles.
FAQ
The information you may like to know before order:
1. Methods of Payment:
  T/T (Telegraphic Transfer) or Western Union or L/C at sight
2. Handling time for an order
  Based on order quantity, normally it takes 25 days for production.
  Only 2 or 3 days if we have stock on your request size.
3. Shipping way
  Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
  Bulk order: we suggest by air or by sea.
4. Quality Control
  We have our own experienced QC.
  There will be strict inspection and testing for every order before shipping out.
5. After Services:
  a. Our sales team will response for your question within 24 hours (Holidays Excluded)
  b. Technical Support will be available in any time
  c. Free replacement will provide once the failure confirmed caused by our product quality
Hand Splitting Stone breaking Tools
Hand Splitter, wedge and shims, plug and feathers.
These traditional tools have been used for eons in the stone industry and are still among the most cost-effective tools for
splitting stone. Also called Wedge and Feathers. These tools are the oldest and still one of the best ways to split stone. Small Wedge and shims in 5/8â?²and 3/4â?²sizes are good for stone yards or stone masons who want to reduce their rocks to workable sizes 1â?²,1-1/4â?²,1-3/8â?²are for splitting large rocks. Our high quality wedge and features are made for splitting granite and other hard stone.
Hole diameter design: 14mm to 38mm
Length: 125mm to 600mm