PQA/PQB series air breather filter protect your hydraulic system from
harmful airborne contaminants during normal breathing of the reservoir
as fluid levels fluctuate and other factors. To help insure system
cleanliness integrity, the breather should become a part of normal
maintenance procedures and be changed whenever the system hydraulic
filter element filters are replaced.
Working substance: air mineral - base fluid, emulsion, water-glycol, phosphate ester
Operating temperature: -25~110
QAW series filter regulator combination minimizes space and piping by
integrating the 2 units into one. Standard features include a relieving
regulator, which can be quickly locked by pushing down on the adjustment
knob. The QAW is one part of the family of modular air preparation units
and can be combined with other similar sized products.
Operating pressure: Max. 10bar
Operating temperature: 5~60
Container material: Polycarbonate
Working substance: Air
QAC series air filter regulator lubricator combination units are
specially designed to efficiently filter out rust, dirt, moisture and
other impurities from compressed air lines. Operation is fully automatic
with a minimum of pressure drop.The cost effective and clean looking QAC
series allows you to pick a combination of modular style air preparation
equipment that best suits your needs, without the use of pipe connectors,
saving space.
XF series compressed air filter is widely used for removal of various
impurities, such as dirt, dust, rust, condensates, moisture , oil
impurities in industrial manufacture for supplying oil-free gas. It
ensures low down time and reduces the production loss.
Operating pressure: Max. 13 bar
Operating temperature: 5~70
Clean pressure drop: 0.1~0.2 bar
Maximum pressure drop: 0.7 bar
Filter housing material: High grade aluminum alloy or steel
KLX series air filter can be used in filtration of gas
turbine, compressor, sand blasting, ash and other industries.It is
made of imported cellulose fiber or synthetic fiber paper for base media
and is good at large filtration surface, excellent filtration efficiency.
Operating temperature: -25~70 Relative humidity:80%
End cap material:galvanized steel plate Seal material: rubber sponge
QAF series air filter is a cost effective, clean looking solution to
your filtration needs.It can remove water and particulate material from
the air stream to protect downstream equipment from contamination, and
its' modular design allows connection with regulator and oil fog
lubricator.
Operating pressure: Max. 10bar
Operating temperature: 5â??~60â??
Container material: Polycarbonate
Working substance: Air
HF4P High-Pressure InLine Filters are designed for use on hydraulic power units, machine tools, plastic injection molding equipment, mobile equipment, and hydraulic test equipment. These filters can be installed on the pump outlet to protect control valves and actuators from contamination. These filters can also be used as In-line Return Filters.
It is installed in low-pressure or return pipelines of hydraulic system; The filtering material of the filter element can be appropriately selected as required; The shell is made of cast iron and the lower shell is stamped and formed by thick-walled steel plates. The differential pressure transmitter is selected according to needs. Operating pressure (max): 2.5Mpa operating temperature: -25~110 Pressure setting of indicator : 0.35Mpa By-pass valve unlocking pressure : 0.5Mpa
Being used in filtration of liquids and lubricants at high
pressure.The filter has a change-over valve and can be directly
installed in the pipelines to provide wear protection of subsequent
components and systems.
Operating pressure: Max. 320 bar
Operating temperature: -25â??~120â??
Setting pressure of clogging indicator: 5bar
Bypass valve cracking pressure: 6bar
Filter housing material:steel
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
Being used in filtration of liquids and lubricants at medium pressure.
Operating pressure: Max. 70 bar
Operating temperature: -25â??~120â??
Setting pressure of clogging indicator: 5 bar
Bypass valve cracking pressure: 6bar
Filter housing material: aluminium
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil(resin-impregnated paper only for mineral oil)
Being used in filtration of liquids and lubricants at low pressure.
Operating pressure: Max. 12 bar
Operating temperature: -25â??~120â??
Setting pressure of clogging indicator: 1.5 bar
Bypass valve cracking pressure: 1.7bar
Filter housing material: Cast aluminum
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
Low Pressure Filter Psf Series
For any questions and needs please contact us below
LYPL/LYPS/LYPD series filter is designed for mounting in the low
pressure pipeline or return line circuits of hydraulic
systems, separating solid particles from the hydraulic fluids returning
to the tank.
Operating pressure: Max. 16 bar
Operating temperature: -25â??~120â??
Setting pressure of clogging indicator:2 bar
Bypass valve cracking pressure: 3bar
Filter housing material:Steel
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
ZGQ series plate gap-type filter is suitable for the filtration of
heavily dirtied low and high viscosity media.For example it can be used
in construction machinery, large-size engines, chemical industries, food
industries, metal-cutting machinery and other areas.
Operating pressure: Max. 40 bar
Operating temperature: 5~80
Filter housing material:steel, stainless steel
SN series basket filter is used mainly as coarse filter or pre-filter
for removing dirt, pipe scale, and other contaminants from process
liquids such as water, chemical and petroleum products.The filter can be
easily installed and cleaned., and this therefore reduces operating
costs. Filter housing is available in carbon steel with an internal
epoxy coating and in stainless steel.
Operating pressure: Max.40 bar
Operating temperature:-30~22 0
Filter housing material: CS, SUS304, SUS316L
Working substance: mineral oil, emulsion, edible oil, water, etc.
SYL series manual cleaning filter is widely used in the power
industry, chemical industry, printing and dyeing, paper and other
industries for water pipes. It has a large filtration area and can be
easily cleaned, on which the handle is rotated 3-4 rings while the
drain valve being opened.
Operating pressure: 1.0~4.0MPa.
Operating temperature: 5~80
Sealing ring: synthetic rubber, PTFE
Cleaning brush: stainless steel, nylon, PVC
QLXF series air oil separator element is suitable for flow from the
outside to the inside.It can be used for the entire range of current
versions of screw-type and sliding vane compressors.The standard wrap
elements are particularly insensitive to the design variations and
achieve optimal results with regard to separation efficiency and
service life.
Residual oil content: 3mg/m Operating temperature: 120
Operating pressure: 0.7MPaClean pressure drop: 0.02
"The screw-in design of this product enables quick and simple flipchart to be changed without using special tools and provides a larger traditional ink cartridge style flipchart that is free from contamination during use. These fragments combine our best technology to treat all fuels and lubricants in all operating environments. Epoxy resin is used in metal plate structure. Enhance compatibility. Electronic coatings provide maximum corrosion resistance and epoxy adhesion. Fluororubber O-rings provide reliable sealing and maximum compatibility.
Features: efficient and most advanced media and design; Unparalleled flight efficiency; Cleaning the target ISO cleanliness in one cleaning; Modular design can solve the following problems: Almost any speed or level of use; Convenient and fast service "
"Being used in filtration of liquids and lubricants at high pressure.
Operating pressure: Max. 420 bar
Operating temperature: -25~120
Setting pressure of clogging indicator: 5 bar
Bypass valve cracking pressure: 6bar
Filter housing material: ductile iron
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil(resin-impregnated paper only for mineral oil)"
Being used in filtration of liquids and lubricants at medium pressure to
filter solid particle and slimes.
Operating pressure: Max. 210 bar
Operating temperature: -25â??~120â??
Setting pressure of clogging indicator: 5 bar
Bypass valve cracking pressure: 6bar
Filter housing material: Impacted aluminium
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
LZL series filter candle is used primarily for filtering lubricating
oils.It gives a large filter surface with a very compact design. The
filter candle is outstanding for its particularly high resistance to
differential pressure.
Operating pressure: 1.6MPa
Operating temperature: -25~120
End cap material:stainless steel phenolplast
Filtration material:stainless steel wire mesh
RLX series filter elements are made of 316L sintered metal fiber felt
(with protected mesh) and they are ideal for temperature up to
300 and highly corrosive applications, which are offered commonly
in 60mm diameter by 250, 500, 750 and 1000mm lengths. They are superior
quality filters whose performance exceed every other competitive element
and are easily cleaned so as to help you avoid increasing disposal
costs.They are widely used in pharmaceutical industry, biological
industry, beverage industry, petroleum industry, chemical fiber and
membrane industries.
PSB series suction filter can be mounted on the top, at the bottom or at
the side of the tank, and the inlet port should be fixed below the fluid
level.The check valve will close automatically to prevent oil flowing
out from the tank when the element is taken out for replacement.
Pressure gauge and other indicators can be installed according to actual
requirement.
Operating temperature: -25~120 Sett ing pressure of indicator: -0.3bar
Filter housing material:aluminium
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
PSD series suction filter can be mounted on the top, at the bottom or at
the side of the tank, and the inlet port should be fixed below the fluid
level.The check valve will close automatically to prevent oil flowing
out from the tank when the element is taken out for washing.Vacuum gauge
and other indicators can be installed according to actual requirement.
Operating temperature: -25~12 Sett ing pressure of indicator: -0.3bar
Filter housing material:aluminium
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil
FLYC Series mobile filtration system is the ideal way to prefilter and
transfer fluids into reservoirs or to clean up existing system.It is a
self-contained filtration system equipped with high efficiency, high
capacity elements capable of removing particulate contamination
quickly, conveniently and economically.
Operating pressure: Max. 1.0 MPa (10bar) Operating temperature of 451
Kinematic viscosity: 5~80mm/s Protection class: IP55
